Buku Panduan Pangguna Pangpanjang Jangkauan Wi-Fi Mercusys ME20 AC750

1. Bubuka

This manual provides instructions for setting up, operating, and maintaining your Mercusys ME20 AC750 Wi-Fi Range Extender. The ME20 is designed to expand your existing Wi-Fi network coverage, eliminating dead zones and providing stable, fast dual-band Wi-Fi to areas previously unreachable by your main router.

2. Produk Langkungview

2.1 Eusi pakét

• Mercusys ME20 AC750 Wi-Fi Range Extender
• Pituduh Pamasangan Gancang (manual ieu)

2.2 Penampilan Fisik

The Mercusys ME20 is a compact, wall-plug design. It features a signal indicator LED, a WPS/Reset button, and an Ethernet port.

Gambar 2.2.1: Hareupeun view of the Mercusys ME20 Wi-Fi Range Extender. The device is white with the MERCUSYS logo and a green signal indicator light at the bottom.

Gambar 2.2.2: Samping view of the Mercusys ME20, showing the integrated power plug, an Ethernet port, and the WPS/Reset button. The device has ventilation holes along its side.

2.3 Indikator LED

• Héjo padet: Excellent connection to the host router.
• Oranyeu Padet: Sambungan anu saé ka router host.
• Beureum padet: Poor connection to the host router.
• Pareum: No connection or device is off.

2.4 Tombol jeung palabuhan

• Tombol WPS/Reset: Press briefly to initiate WPS setup. Press and hold for 5 seconds to reset the extender to factory defaults.
• Ethernet Port (10/100 Mbps): Used for wired connections to devices like PCs, IPTVs, or game consoles.

3. Setélan

There are two methods to set up your Mercusys ME20 range extender: using the WPS button or via a web browser.

3.1 Métode 1: Ngagunakeun Tombol WPS (Disarankeun)

1. Daya Hurung: Plug the extender into an electrical outlet near your host router. Wait for the LED to turn solid red.
2. Pencét WPS dina Router: Pencét tombol WPS dina router host anjeun.
3. Pencét WPS dina Extender: Within two minutes, press the WPS/Reset button on your ME20 extender.
4. Nitenan LED: The LED on the extender will flash and then turn solid green or orange, indicating a successful connection.
5. Pindahkeun Extender: Unplug the extender and move it to a location between your router and the Wi-Fi dead zone. Choose a spot where the LED is solid green or orange.

Gambar 3.1.1: The Mercusys ME20 extender plugged into a standard wall socket, ready for setup. The device is compact and does not obstruct adjacent outlets.

Gambar 3.1.2: The Mercusys ME20 extender positioned in a wall outlet, demonstrating its discreet integration into a home setting. The signal indicator light is visible.

3.2 Métode 2: Liwat a Web Pangotektak

1. Daya Hurung: Plug the extender into an electrical outlet near your host router. Wait for the LED to turn solid red.
2. Sambungkeun ka Extender: On your computer or smartphone, connect to the Wi-Fi network named "MERCUSYS_EXTENDER" (or similar, check the label on the extender). No password is required.
3. Aksés Web panganteur: Buka a web browser jeung tipe mwlogin.net or the IP address (usually 192.168.1.1) into the address bar.
4. Jieun Sandi Asup: Create a new login password for the extender's management page.
5. Pilih Jaringan Host: Follow the on-screen instructions to select your host Wi-Fi network and enter its password.
6. Pindahkeun Extender: Unplug the extender and move it to a location between your router and the Wi-Fi dead zone. Choose a spot where the LED is solid green or orange.

Catetan: If the LED is red after relocation, move the extender closer to the host router.

4. Parentah Operasi

4.1 Nyambungkeun Alat

Once the extender is successfully set up, devices can connect to the extended Wi-Fi network using the same network name (SSID) and password as your main router, or a new SSID if you configured one during setup.

• Alat nirkabel: Connect smartphones, tablets, laptops, and other Wi-Fi enabled devices to the extended network.
• Alat kabel: Use an Ethernet cable to connect devices like smart TVs, game consoles, or desktop PCs to the extender's Ethernet port for a stable wired connection.

4.2 Understanding the Signal Indicator

The multicolor LED on the front of the extender helps you determine the optimal placement for the best Wi-Fi extension.

• Héjo padet: Indicates a strong signal from the host router. This is the ideal placement.
• Oranyeu Padet: Indicates a moderate signal from the host router. The extender is functioning, but a stronger signal might be achievable by adjusting its position.
• Beureum padet: Indicates a weak signal from the host router. Move the extender closer to your host router.

5. Pangropéa

5.1 Perawatan Umum

• Keep the device in a dry environment, away from water and excessive humidity.
• Hindarkeun ngalaan alat ka suhu anu ekstrim.
• Ensure proper ventilation; do not block the ventilation holes.
• Bersihkeun alat ku kaen anu lemes sareng garing. Ulah make cleaners cair atawa aerosol.

5.2 Apdet firmware

Periodically check the Mercusys official website for firmware updates. Updating the firmware can improve performance, add new features, and fix bugs. Refer to the Mercusys support page for specific instructions on how to update your ME20's firmware.

6. Cara ngungkulan

6.1 No Internet Access After Connecting to Extender

• Check Host Router: Pastikeun router utama anjeun gaduh aksés internét.
• Penempatan Extender: Verify the extender's LED is solid green or orange. If red, relocate it closer to the host router.
• Reboot: Try rebooting both your host router and the extender.
• Konfigurasi ulang: Upami masalahna masih aya, cobian konfigurasi ulang extender nganggo tombol WPS atanapi web metode panyungsi.

6.2 Slow Speed on Extended Network

• Penempatan Extender: The extender might be too far from the host router. Relocate it to a position where the LED is solid green.
• gangguan: Reduce interference from other electronic devices (e.g., microwaves, cordless phones) by moving the extender or the interfering devices.
• Kemacetan jaringan: Too many devices on the network can cause slowdowns.

6.3 How to Reset the Extender

To restore the extender to factory default settings, press and hold the WPS/Reset button for approximately 5 seconds until the LED flashes rapidly. Release the button and wait for the extender to restart.

7. Spésifikasi

8. Garansi jeung Rojongan

For warranty information, technical support, and further assistance, please visit the official Mercusys website. You can find FAQs, driver downloads, and contact information for customer service there.

Resmi Mercusys Websitus: www.mercusys.com