AOPUTTRIVER AP-6688B Digital Insulation Resistance Tester User Manual

1. Bubuka

Thank you for choosing the AOPUTTRIVER AP-6688B Digital Insulation Resistance Tester. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before use and keep it for future reference.

The AP-6688B is a professional instrument designed for accurate measurement of insulation resistance in various electrical equipment and insulating materials, such as transformers, motors, cables, switches, and electrical appliances. Its robust design and comprehensive features ensure reliable performance in demanding environments.

2. Émbaran Kasalametan

PERHATOSAN: High voltage is present during insulation resistance testing. Failure to follow safety precautions can result in serious injury or death.

• Always ensure the device under test is de-energized and safely discharged before connecting the tester.
• Ulah dianggo alat uji upami katingalina ruksak atanapi upami kabel uji rusak.
• Anggo alat pelindung pribadi (PPE), kalebet sarung tangan insulasi sareng kacamata kaamanan.
• Do not operate the tester in wet conditions or in explosive atmospheres.
• Pastikeun kompartemen batré ditutup pageuh sateuacan dioperasikeun.
• The product design conforms to IEC-1010 double insulation, pollution degree II, and overvoltage category II standards.

3. Produk Langkungview

The AOPUTTRIVER AP-6688B is a compact and durable insulation resistance tester. Below are the key components and their descriptions:

Figure 3.1: AP-6688B Insulation Resistance Tester with included test leads, batteries, and carrying case.

Figure 3.2: Front panel layout of the AP-6688B, highlighting the LCD display, control buttons (HOLD, TEST/STOP, LIGHT), HV indicator, and the rotary switch for selecting test voltage jeung fungsi.

Kontrol sareng Indikator:

• Layar LCD: 1999-count digital display for measurement readings.
• Tombol TAHAN: Freezes bacaan ayeuna dina tampilan.
• TEST/STOP Button: Initiates and stops the insulation resistance test.
• Tombol Cahaya: Activates the display backlight for improved visibility in low-light conditions.
• HV Indicator Lamp: A beureum lamp that illuminates when high voltage is present during testing.
• Saklar Rotary: Selects test voltages (500V, 1000V, 2500V, 5000V) for insulation resistance, AC voltage measurement (750V), and OFF position.
• Terminal Input: L (LINE), COM (COMMON), E (EARTH) for connecting test leads.

4. Setélan

4.1 Ngabongkar sareng Inspeksi

Upon receiving your AP-6688B, carefully unpack all components and inspect for any signs of damage. The package should contain:

• 1 x AOPUTTRIVER AP-6688B Digital Insulation Resistance Tester
• 1 x Set of Test Leads (Red, Black, Green)
• 6 x 1.5V Batré AA
• 1 x Mawa Kasus
• 1 x Manual Pamaké (dokumén ieu)

Figure 4.1: All items included in the AP-6688B product package.

4.2 Pamasangan batré

The AP-6688B requires 6 x 1.5V AA batteries for operation. Follow these steps to install the batteries:

1. Ensure the rotary switch is in the 'OFF' position.
2. Teangan tempat panutup kompartemen batré dina tonggong unit.
3. Paké obeng pikeun loosen screw nu ngamankeun panutup batré.
4. Cabut panutup batré.
5. Pasangkeun 6 batré AA, perhatikeun polaritas anu leres (+/-) sapertos anu dituduhkeun di jero kompartemenna.
6. Ganti tutup batréna sareng kencengkeun sekrup.

Figure 4.2: Proper battery installation in the AP-6688B's rear compartment.

4.3 Nyambungkeun Test Leads

Connect the test leads to the appropriate input terminals on the tester:

• Connect the red test lead to the 'L' (LINE) terminal.
• Connect the black test lead to the 'COM' (COMMON) terminal.
• Connect the green test lead to the 'E' (EARTH) terminal for grounding, if required for your test setup.

Figure 4.3: Correct connection of test leads to the AP-6688B's input terminals.

5. Parentah Operasi

5.1 Ukur Résistansi Insulasi

Pikeun ngukur résistansi insulasi:

1. Ensure the device under test is de-energized and isolated from all power sources.
2. Connect the test leads to the device under test as per the specific test requirements (e.g., between conductor and ground, or between two conductors).
3. Turn the rotary switch to the desired insulation test voltage (500V, 1000V, 2500V, or 5000V). The display will show '000' or a similar standby indication.
4. Pencét jeung tahan tombol TEST/STOP button to begin the test. The HV indicator lamp will illuminate, indicating high voltage kaluaran.
5. Read the insulation resistance value on the LCD display.
6. Ngaleupaskeun TEST/STOP button to stop the test. The HV indicator lamp will turn off, and the device will automatically discharge any residual voltage.
7. For continuous measurement, you can press and hold the TEST/STOP kancing.

Figure 5.1: The AP-6688B being used to measure insulation resistance in an electrical panel.

5.2 AC Voltage Pangukuran

Pikeun ngukur AC voltage:

1. Turn the rotary switch to the '750V AC' position.
2. Connect the red and black test leads across the circuit or component where you want to measure AC voltage.
3. AC voltagbacaan e bakal dipintonkeun dina LCD.

5.3 Using the Backlight and Data Hold

• Lampu tukang: Pencét éta CAHAYA button to turn the display backlight on or off. This is useful in dimly lit environments.
• Tahan Data: Pencét éta TAHAN button to freeze the current reading on the display. Press it again to release the hold function and resume live readings.

6. Pangropéa

6.1 beberesih

• Lap c méternaasing jeung iklanamp lawon jeung detergent hampang. Ulah make cleaners abrasive atawa pangleyur.
• Pastikeun méterna garing pisan sateuacan disimpen atanapi dianggo salajengna.

6.2 Ngagantian batré

When the battery indicator appears on the LCD, replace the batteries promptly to ensure accurate measurements. Refer to Section 4.2 for battery installation instructions.

6.3 Panyimpenan

• If the meter will not be used for an extended period, remove the batteries to prevent leakage and damage to the unit.
• Simpen méteran di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Use the provided carrying case to protect the meter from dust and physical damage.

7. Cara ngungkulan

8. Spésifikasi

Figure 8.1: Dimensions of the AP-6688B tester.

9. Garansi jeung Rojongan

AOPUTTRIVER provides a garansi 2 taun for the AP-6688B Digital Insulation Resistance Tester from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Additionally, AOPUTTRIVER offers rojongan teknis hirupna for this product. If you encounter any issues or have questions regarding the operation, maintenance, or troubleshooting of your AP-6688B, please do not hesitate to contact our customer support team.

For warranty claims or technical assistance, please refer to the contact information provided on our official websitus atanapi bungkusan produk.