1. Bubuka
The MOTOPOWER MP69037 OBD2 Scanner Code Reader is a diagnostic tool designed to read and clear engine fault codes from OBD II compliant vehicles. This manual provides essential information for the proper use and maintenance of your device.
Figure 1: MOTOPOWER MP69037 OBD2 Scanner Code Reader
2. Setélan
2.1 Eusi pakét
- OBD2 Scanner x 1
- Buku Panduan x 1
- Kantong Panyimpen x 1
2.2 Nyambungkeun Alat
The MP69037 scanner does not require batteries or an external charger. It draws power directly from your vehicle through the OBDII Data Link Connector (DLC).
- Panggihan 16-pin Data Link Panyambung (DLC) kendaraan. Ieu ilaharna kapanggih dina dasbor di sisi supir urang.
- Pastikeun ignition kendaraan aya dina posisi OFF.
- Colokkeun pageuh konektor OBDII pamindai kana DLC kendaraan.
- Turn the vehicle's ignition to the ON position (do not start the engine unless instructed by a specific diagnostic function). The scanner will automatically power on.
Figure 2: Connecting the OBD2 scanner to the vehicle's DLC port, typically located under the dashboard.
3. Parentah Operasi
The MP69037 features a clear LCD screen (128 x 64 pixels) with white backlight and contrast adjustment, along with LED indicators for working modes. Navigation is performed using the scroll up/down, enter/exit buttons, and dedicated buttons for VIN and DTC fault code queries.
3.1 Fungsi Utama
- Baca Konci: Retrieves Diagnostic Trouble Codes (DTCs) tina komputer kendaraan.
- Hapus Code: Ngabersihan DTC tina komputer kendaraan sareng mareuman Lampu Mesin Cék (MIL).
- View Frame Frame: Némbongkeun gambaran ringkes kaayaan operasi nalika aya gangguan anu aya patalina jeung émisi.
- Kesiapan I / M: Checks the status of emission-related monitoring systems to determine if they are ready for an inspection.
- Émbaran Kandaraan: Retrieves Vehicle Identification Number (VIN), Calibration ID (CID), and Calibration Verification Number (CVN).
- Aliran Data: Displays real-time data parameters from the vehicle's sensors, such as vehicle speed, calculated load value, engine coolant temperature, and engine RPM.
- Tés Sénsor O2: Retrieves O2 sensor monitor hasil tés.
- Pustaka Panéangan DTC: Built-in library to help determine the cause of the engine light by providing definitions for DTCs.
Figure 3: The scanner displays various real-time data streams and system statuses.
3.2 Rojongan Basa
The device supports 6 languages: English, German, Dutch, Spanish, French, and Italian. Language settings can be adjusted via the system setup menu.
Figure 4: The scanner supports multiple languages for user convenience.
3.3 Live Data Stream Demonstration
Video 1: This video demonstrates the MOTOPOWER MP69037 OBD2 Code Reader Scanner in action, showing how to navigate menus and view live data streams from a vehicle. It highlights the device's ability to provide real-time information on engine parameters.
4. Pangropéa
To ensure the longevity and proper functioning of your MOTOPOWER MP69037 scanner, follow these maintenance guidelines:
- Jaga alat tetep beresih sareng bebas tina lebu sareng lebu. Anggo kaén anu lemes sareng garing pikeun beberesih.
- Avoid exposing the device to extreme temperatures (both hot and cold) or direct sunlight for extended periods. Proper storage in a temperate environment is recommended to prevent screen distortion or damage to internal components.
- Store the scanner in its provided storage pouch when not in use to protect it from physical damage.
- Handle the OBDII connector carefully to prevent damage to the pins.
5. Cara ngungkulan
5.1 Isu umum jeung Solusi
- Alat teu hurung: Ensure the OBDII connector is securely plugged into the vehicle's DLC. Verify that the vehicle's ignition is in the ON position.
- "Failed to Connect" message: This indicates a communication error. Check the connection to the DLC. Ensure the ignition is ON. Some vehicles may require the engine to be running for full communication.
- Cannot read ABS/Airbag codes: The MOTOPOWER MP69037 is designed to read and clear check engine information (OBDII system) only. It does not support non-OBDII systems such as ABS, Airbag, or Oil Service Light.
- Screen distortion: Avoid storing the device in extreme temperatures (e.g., hot car trunk in summer, cold vehicle in winter) as this can affect the LCD screen.
5.2 Clearing Codes
After resolving a fault, you can use the 'Erase Codes' function to clear the Diagnostic Trouble Codes and turn off the Check Engine Light. Note that some codes may reappear if the underlying issue is not fully resolved.
Pidéo 2: Pidéo ieu nyayogikeun gambaran ringkesview of the MOTOPOWER MP69037 OBD2 Code Reader Scanner, demonstrating its user interface and basic functions like reading and clearing codes.
6. Spésifikasi
- merek: MOTOPOWER
- model: MP69037
- Beurat barang: 12.3 ons
- Ukuran produk: 6.5 x 3.75 x 0.91 inci
- Sistem operasi: Windows (for updates, not for device operation)
- Rojongan Basa: English, German, Dutch, Spanish, French, Italian
- Fitur husus: DTC lookup library, Data Flow, Real-Time Graphic View, View Freeze Frame, Zinc Alloy Handle
- tampilan: LCD (128 x 64 pixels) with white backlight and contrast adjustment, LED indicators
- Sumber Daya: Vehicle OBDII Data Link Connector (no batteries required)
- UPC: 724087551285
7. Garansi
The MOTOPOWER MP69037 comes with a 2-year EU Spare Part Availability Duration, which may indicate the period for parts support or warranty coverage in the European Union.
8. Rojongan
For additional product information, troubleshooting assistance, or customer service inquiries, please refer to the following resources:
- Websitus: www.motopowers.com
- Surélék: customerservice@motopowers.com
- Kaasup: Instruction Manual (physical copy in package)
