1. Produk Langkungview
The FLYLINKTECH CF200 Battery Jump Starter is a versatile and powerful device designed to jump start 12V vehicles with up to 6.0L gasoline or 5.0L diesel engines. Beyond its primary function, it also serves as a portable power bank and features an integrated LED flashlight with multiple modes, making it an essential tool for automotive emergencies and outdoor activities.

Figure 1: FLYLINKTECH CF200 Jump Starter and included accessories.
2. Émbaran Kasalametan penting
Mangga baca sakabeh warnings kaamanan jeung parentah taliti saméméh ngagunakeun produk ieu. Paranti nuturkeun parentah ieu bisa ngakibatkeun shock listrik, seuneu, jeung/atawa tatu serius.
- Always ensure the jump starter is fully charged before use for optimal performance.
- Do not jump start a vehicle if the battery voltage is extremely low (below 10V) without consulting a professional.
- Avoid short-circuiting the jumper clamps. Do not connect the red and black clamps babarengan.
- Keep the device away from water, moisture, and extreme temperatures. It is IP67 waterproof, but prolonged submersion is not recommended.
- Ulah dibongkar unitna. Serahkan sadaya perawatan ka petugas layanan anu mumpuni.
- Jauhkeun tina jangkauan barudak.
- Operate within the specified temperature range: -20℃ to 60℃ (-4°F to 140°F).

Figure 2: The smart clamps provide multiple protection features including short circuit, high temperature, over charge, over discharge, reverse polarity, and over current protection.
3. Eusi Paket
- FLYLINKTECH CF200 Jump Starter
- Kabel Jumper pinter
- Kabel Micro USB
- Manual pamaké
4. Setelan Awal sareng Ngecas
Before first use, fully charge the jump starter. It is recommended to charge the product once every 3 months to maintain optimal battery health, even if not in use.
Ngecas Jump Starter:
- Connect the Micro USB cable to the jump starter's Micro USB Input port.
- Connect the other end of the Micro USB cable to a 5V/2A USB power adapter (not included).
- Lampu indikator LED bakal nyaangan pikeun nunjukkeun kamajuan ngecas. Sadaya lampu bakal padet nalika dicas pinuh.
Catetan: Do not charge the jump starter immediately after jump starting an engine. Allow at least 30 minutes for the unit to cool down.

Figure 3: The jump starter can also function as a portable power bank to charge your electronic devices.
5. Parentah Operasi
5.1. Ngahurungkeun Kandaraan sacara Langsung
- Connect Smart Jumper Cables: Insert the blue plug of the smart jumper cables into the 12V Auto Jump Port on the jump starter. Ensure a firm connection.
- Gantelkeun Clamps ka Batré: Sambungkeun beureum (+) clamp to the positive (+) terminal of the vehicle's battery. Connect the black (-) clamp to the negative (-) terminal of the vehicle's battery. The indicator light on the smart clamp will show green if the connection is correct and safe. If it shows red, check the connections for reverse polarity or short circuit.
- Mimitian Kendaraan: Sakali kelas pinteramp indicator is green, start your vehicle's engine.
- Leupaskeun Clamps: After the vehicle starts, immediately remove the jumper clamps from the car battery, then disconnect the smart jumper cables from the jump starter.

Figure 4: Step-by-step guide for jump starting your vehicle.
Video 1: Demonstration of the FLYLINKTECH CF200 Jump Starter in action, showing its features and how to jump start a vehicle.
5.2. Ngagunakeun salaku Power Bank
The jump starter features dual USB output ports (5V 2.4A) and a Type-C input/output port, allowing you to charge various electronic devices such as smartphones, tablets, and other USB-powered gadgets.
- Connect your device's charging cable to one of the USB output ports or the Type-C port on the jump starter.
- Jump starter bakal otomatis mimiti ngecas alat anjeun.
5.3. LED Flashlight Functions
The built-in LED flashlight offers three modes for different situations:
- Modeu iluminasi: Pencét terus tahan tombol daya salami 3 detik pikeun ngahurungkeun senter.
- Modeu Strobe: Press the power button once more to activate the strobe light, useful for signaling.
- Modeu SOS: Press the power button a third time to activate the SOS signal, for emergency situations.
- To turn off the flashlight, press the power button again or press and hold for 3 seconds.

Figure 5: The integrated LED flashlight provides three useful modes for various scenarios.
5.4. Emergency Tools (Glass Breaker & Belt Cutter)
For added safety in emergencies, the CF200 is equipped with a glass breaker and a seatbelt cutter. The glass breaker is located at one end of the unit, and the belt cutter is safely concealed under a cap. These tools are designed for use in critical situations where quick escape from a vehicle is necessary.
6. Pangropéa sareng Panyimpenan
- Clean the jump starter with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- Simpen unit di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng sumber panas.
- For long-term storage, ensure the unit is charged to at least 50% and recharge it every 3 months to prevent deep discharge and prolong battery life.
- Keep the smart jumper cables clean and free from corrosion.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kandaraan teu ngamimitian | Batré jump starter lemah. | Ngecas starter luncat. |
| Clamps teu bener disambungkeun. | Pastikeun clamps are securely connected to the correct battery terminals. Check smart clamp indicator for green light. | |
| Vehicle battery is severely damaged. | Konsultasi ka montir profésional. | |
| Cl pinteramp shows red light | Reverse polarity or short circuit. | Pegatkeun sambungan clamps and re-attach correctly (red to positive, black to negative). Ensure clamps do not touch each other. |
| Alat teu ngecas | Masalah kabel ngecas atanapi adaptor. | Try a different Micro USB cable or power adapter. |
8. Spésifikasi Téknis
| Fitur | Spésifikasi |
|---|---|
| Modél | CF200 |
| Puncak Arus | 1200A |
| Kasaluyuan engine | Nepi ka 6.0L Gas / 5.0L Diesel |
| Kapasitas batré | 13200 mah |
| Input | 5V/2A (Mikro USB) |
| Kaluaran | 5V 2.4A (Dual USB), 12V Jump Start |
| Suhu Operasi | -20 ℃ nepi ka 60 ℃ (-4 ° F nepi ka 140 ° F) |
| Saumur hirup | > 1000 siklus |
| Diménsi | 158 x 88 x 33mm (6.22 x 3.46 x 1.29 inci) |
| Beurat | 380g (0.83 lbs) |
| Peunteun waterproof | IP67 |

Figure 6: Detailed diagram showing the dimensions and various ports/features of the jump starter.
9. Garansi sarta Rojongan Palanggan
FLYLINKTECH provides 12 months technical support and after-sales customer service. If you encounter any problems during use, please feel free to contact us through Amazon. Our professional technical team is always here to help you.
For further assistance, please refer to the official FLYLINKTECH store on Amazon: FLYLINKTECH Store





