1. Produk Langkungview
Image 1.1: The Total TS2045565 Jig Saw, featuring its turquoise body, red trigger, and metal base plate with an installed blade.
The Total TS2045565 Jig Saw is a versatile power tool designed for cutting various materials, primarily wood and steel. It operates on a 220-240V~50/60Hz power supply and features a robust 400W motor. With a no-load speed ranging from 800 to 3000 revolutions per minute (RPM), it offers precise control for different cutting tasks. This model is capable of cutting wood up to 55mm thick and steel up to 3mm thick. It comes equipped with a set of three saw blades to get you started.
2. Parentah Kasalametan
Always adhere to the following safety guidelines to prevent injury and ensure safe operation of your jig saw:
- Baca Manual: Before operating the tool, thoroughly read and understand all instructions and safety warnings in this manual.
- Nganggo Alat Pelindung Diri (APD): Always wear safety glasses, hearing protection, and a dust mask when operating the jig saw.
- Workpiece Aman: Salawasna clamp or otherwise secure the workpiece to a stable surface. Do not hold the workpiece by hand.
- Ngajaga Wewengkon Gawé Bersih: Keep your work area well-lit and free of clutter. Cluttered or dark areas invite accidents.
- Hindarkeun Lingkungan Anu Bahaya: Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
- Pariksa Karusakan: Before each use, inspect the tool for any damage. Do not use the tool if the cord, plug, or any other part is damaged.
- Pegatkeun Daya: Salawasna pegatkeun sambungan colokan listrik ti sumber listrik samemeh nyieun sagala pangaluyuan, ngaganti asesoris, atawa nyimpen alat.
- Anggo Blade anu leres: Ensure the correct type of blade is used for the material being cut.
- Tetep Leungeun Jelas: Keep hands and fingers away from the cutting area and the blade.
- Ulah Overreach: Ngajaga footing ditangtoskeun jeung kasaimbangan sepanjang waktos.
3. Eusi Paket
Your Total TS2045565 Jig Saw package should include the following items:
- 1 x Total TS2045565 Jig Saw (400W)
- 3 x Saw Blades (for various materials)
- 1 x Manual Pamaké
Upami aya barang anu leungit atanapi ruksak, mangga langsung ngahubungi padagang anjeun.
4. Spésifikasi Téknis
| Fitur | Spésifikasi |
|---|---|
| Modél | TS2045565 |
| merek | Total |
| Daya Input | 400W |
| Voltage | 220-240V~50/60Hz |
| Laju No-beban | 800-3000 rpm |
| Kapasitas Motong (Kai) | 55 mm |
| Cutting Capacity (Steel) | 3 mm |
| Bahan Sabeulah | Alloy Steel |
| Tipe Sumber Daya | Kabel Listrik |
| Warna | Pirus |
| Item Beurat | 100 g |
| Dimensi produk | 1 x 1 x 1 cm |
| Fitur husus | adjustment jero |
5. Setélan
5.1. Pamasangan sabeulah
Always ensure the tool is unplugged from the power source before installing or changing blades.
- Unplug the Tool: Disconnect the jig saw from the power outlet.
- Buka Blade Clamp: Manggihan sabeulah clamp mechanism, usually a lever or screw, near the front of the tool. Open or loosen it according to your model's design.
- Selapkeun Blade: Insert the shank of the saw blade into the blade holder with the teeth facing forward. Ensure the blade is fully seated and aligned correctly.
- Sabeulah Aman: Close or tighten the blade clamp mechanism firmly to secure the blade in place. Gently pull on the blade to confirm it is locked and will not come loose during operation.
- Pariksa Blade Alignment: Verify that the blade is straight and not bent or misaligned.
5.2. Adjusting the Base Plate (Depth Adjustment)
The base plate can be adjusted for different cutting angles and depths. Refer to the tool's specific locking mechanism for adjustment.
- Unplug the Tool: Ensure the jig saw is unplugged.
- Loosen Base Plate Screws: Locate the screws or levers that secure the base plate. Loosen them sufficiently to allow movement.
- Adjust Angle/Depth: Pivot the base plate to the desired angle (e.g., for bevel cuts) or adjust its position for specific depth requirements. The TS2045565 features depth adjustment.
- Tighten Base Plate: Once the desired setting is achieved, firmly tighten the screws or levers to lock the base plate in position.
6. Parentah Operasi
6.1. Operasi dasar
- Nyiapkeun workpiece: Secure the material to be cut firmly to a workbench or stable surface using clamps. Mark your cutting line clearly.
- Pilih Speed: If your model has variable speed control, select an appropriate speed for the material. Lower speeds are generally for harder materials like metal, higher speeds for softer materials like wood. The TS2045565 has a no-load speed of 800-3000 rpm.
- Colokkeun: Connect the jig saw to a suitable power outlet (220-240V~50/60Hz).
- Mimitian Motong: Place the front edge of the base plate flat on the workpiece, ensuring the blade is clear of the material. Press the trigger to start the motor. Allow the blade to reach full speed before beginning the cut.
- Guide the Tool: Slowly guide the jig saw along your marked cutting line, applying steady, even pressure. Do not force the tool; let the blade do the work.
- Potongan Rengse: Once the cut is complete, release the trigger and wait for the blade to stop completely before lifting the tool from the workpiece.
6.2. Motong Bahan Anu Béda
- kayu: Use a wood-cutting blade. For softwoods, use a higher speed. For hardwoods, a medium speed is often best. The maximum cutting capacity for wood is 55mm.
- logam: Use a metal-cutting blade. Apply cutting oil for smoother cuts and to prolong blade life. Use a lower speed setting. The maximum cutting capacity for steel is 3mm.
- Plastik: Use a fine-tooth blade. Start with a low speed to prevent melting the plastic, then gradually increase if necessary.
7. Pangropéa
Pangropéa rutin ngajamin umur panjang sareng kinerja optimal jig saw anjeun.
- beberesih: After each use, unplug the tool and use a brush or compressed air to remove sawdust and debris from the ventilation slots and blade area. Do not use solvents or abrasive cleaners.
- Perawatan Blade: Inspect blades regularly for sharpness and damage. Replace dull or bent blades immediately to ensure clean cuts and prevent strain on the motor.
- Inspeksi kabel: Periodically check the power cord for cuts, fraying, or other damage. If damaged, have it repaired by a qualified technician.
- Panyimpenan: Store the jig saw in a dry, secure place, out of reach of children. Protect it from direct sunlight and extreme temperatures.
- Lubrication: This tool typically does not require user lubrication. Refer to a professional service center if internal lubrication is suspected to be needed.
8. Cara ngungkulan
Bagian ieu ngabahas masalah umum anu anjeun tiasa pendak sareng gergaji jig anjeun.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat henteu ngamimitian | Teu aya catu daya; Kabel/colokan daya ruksak; Saklar rusak | Check power outlet and connections; Inspect cord/plug for damage; Contact service center if switch is faulty. |
| Mata pisauna teu motong sacara efisien atawa teu bisa ngabeungkeut | Dull or incorrect blade; Blade not properly installed; Forcing the tool; Incorrect speed setting | Replace blade; Ensure blade is fully seated and clamped; Reduce feed pressure; Adjust speed setting. |
| Geter atawa noise kaleuleuwihan | Loose blade; Damaged blade; Internal component issue | Check blade installation; Replace damaged blade; Contact service center for internal issues. |
| Motor overheating | Slot ventilasi anu tersumbat; Alatna kaleuleuwihi beurat | Clean ventilation slots; Reduce load on the tool; Allow tool to cool down. |
9. Garansi jeung Rojongan
Total products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, service, or warranty inquiries, please contact your local Total authorized service center or the retailer from whom you purchased the product. Do not attempt to repair the tool yourself, as this may void the warranty and pose safety risks.
For more information, visit the official Total websitus atanapi tingali dokuméntasi pameseran anjeun.
