SCULPFUN S9 Laser Engraver 90W User Manual

1. Bubuka

The SCULPFUN S9 Laser Engraver 90W is a high-performance laser engraving and cutting machine designed for precision work on various materials. Featuring advanced laser beam shaping technology, it offers exceptional cutting capabilities and engraving accuracy. This manual provides essential information for safe operation, assembly, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Émbaran Kasalametan

PERHATOSAN: This is a Class IV laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always wear appropriate laser safety goggles during operation. Ensure the laser protective cover is in place to filter harmful UV rays.

• Pernah ningali langsung kana sinar laser.
• Operate the engraver in a well-ventilated area to dissipate fumes.
• Jauhkeun bahan anu gampang kaduruk tina daérah damel.
• Ensure the A4 size protective plate is used to protect the desktop from laser damage and isolate fire hazards.
• Familiarize yourself with the emergency power switch for quick shutdown.
• Rujuk kana Émbaran Kasalametan PDF pikeun tungtunan kaamanan lengkep.

Figure 2.1: SCULPFUN S9 featuring a laser protective cover designed to filter 98% of ultraviolet rays, enhancing eye safety during operation.

3. Produk Langkungview

The SCULPFUN S9 boasts a full-metal structure for enhanced durability and engraving accuracy. Its compact design allows for easy setup and operation. Key features include:

• 90W Effect Laser: Equipped with 5.5W laser shaping technology for ultra-fine 0.06mm laser focus.
• Cutting Capability: Can cut 15mm thick wood and 10mm acrylic.
• Bahan Ukiran: Capable of carving ceramics and stainless steel, in addition to wood, paper, cardboard, plastic, PCB board, aluminum oxide, and dark stone.
• Fixed Focus & Sliding Design: Simplifies focusing for easier engraving.
• Area Ukiran Ageung: 410 x 420 mm working area, expandable with additional accessories.
• Precision Graduation Lines: X and Y axes include measurement lines for easy object sizing.

Gambar 3.1: Leuwihview of the SCULPFUN S9 Laser Engraver and examples tina kamampuhna dina bahan béda.

4. Setélan

The SCULPFUN S9 is designed for fast assembly. Follow these steps to set up your engraver:

1. Buka bungkus sadaya komponén sareng pariksa kana daptar bungkusan.
2. Assemble the X-axis assembly, X shaft, and Y shaft components as per the included instructions.
3. Attach the control box module set and support feet.
4. Install the laser module set and connect the 12V 5A power adapter and USB cable.
5. Ensure all screws are tightened securely using the provided M5, M4, and M3 screwdrivers.
6. Attach the belts and ensure proper tension.

Figure 4.1: Visual guide for the fast assembly design of the SCULPFUN S9 Laser Engraver.

5. Parentah Operasi

The SCULPFUN S9 is compatible with various precision engraving software. Ensure your software is properly configured before operation.

• Kasaluyuan Parangkat Lunak: Supports LaserGRBL, LightBurn, Benbox, GrblController, LiteFire.
• Sistem Operasi: Compatible with Windows (XP/7/8/10/11) and MAC (LightBurn).
• File Bentuk: Supports JPG, PNG, DXF, SVG, G-Code, NC, BMP, etc.
• Fokus: Use the fixed focus lens and sliding design for quick and accurate focusing. The laser beam is only 0.1mm, allowing for ultra-fine engraving lines.
• Nyiapkeun bahan: For engraving reflective materials like stainless steel, apply a black coating (e.g., whiteboard pen ink or marker ink) to improve engraving efficiency. Allow the coating to dry completely before engraving.

Figure 5.1: Demonstrates the fixed focus and easy sliding design, along with the circular eye protection cover for safe observation.

6. Pangropéa

Regular maintenance ensures the optimal performance and longevity of your SCULPFUN S9 laser engraver.

• Ngabersihan Lensa Laser: The exhaust hood helps reduce fume particles from attaching to the front lens. If laser energy weakens, clean the lens with a cotton swab and alcohol to refresh laser power.
• beberesih umum: Keep the machine free from dust and debris. Regularly wipe down the X and Y axes.
• Tegangan sabuk: Periodically check the tension of the belts and adjust if necessary to maintain engraving accuracy.

Figure 6.1: The SCULPFUN S9 laser module features an efficient and quiet powerful fan for optimal performance and longevity.

7. Cara ngungkulan

If you encounter issues with your SCULPFUN S9, refer to the following common problems and solutions:

• Engraving is not precise or lines are uneven:
  • Pariksa tegangan sabuk.
  • Ensure the material is flat and securely placed.
  • Verify laser focus is correctly set for the material thickness.
• Laser is not firing or is weak:
  • Pariksa sambungan daya sareng pastikeun saklar daya hurung.
  • Ngabersihan lénsa laser sakumaha dijelaskeun dina bagian Pangropéa.
  • Verify software settings for laser power and speed.
• Machine is not responding to software commands:
  • Ensure the USB cable is securely connected to both the engraver and your computer.
  • Restart the software and the engraver.
  • Check device drivers and software compatibility with your operating system.

8. Spésifikasi

9. Garansi jeung Rojongan

SCULPFUN offers a one-year warranty and 12-hour quick response support for the S9 Laser Engraver. For technical support or warranty claims, please contact the manufacturer directly.

Visit the official SCULPFUN store for more information and resources: SCULPFUN Store