Timer DIN Rail Digital Bearware - Manual Instruksi Modél A304589x61

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Bearware Digital DIN Rail Timer, Model A304589x61. This digital timer is designed for precise time control of electrical circuits, suitable for installation in fuse boxes, distribution boxes, or mesh boxes on a DIN rail. It offers flexible programming options for daily and weekly schedules, making it ideal for applications such as staircase lighting, garage door control, or access route illumination.

2. Parentah Kasalametan

WARNING: Electrical installation should only be performed by a qualified electrician in accordance with local wiring regulations and safety standards. Incorrect installation can lead to electric shock, fire, or damage to the device.

• Always disconnect power at the main circuit breaker before installation, maintenance, or troubleshooting.
• Ensure the timer is installed in a dry, protected environment.
• Do not connect devices with a current output exceeding 16A (3650W).
• The switching contact is potential-free.
• Suitable for capacitive loads (e.g., LED lighting power supplies). Conditionally suitable for inductive loads (e.g., small motors for pumps up to 300 watts).
• Jauhkeun alat ti barudak.

3. Produk Langkungview

The Bearware Digital DIN Rail Timer (Model A304589x61) features a clear LCD display and intuitive controls for easy programming. It is designed for seamless integration into standard DIN rail setups.

Gambar 1: Hareupeun view of the Bearware Digital DIN Rail Timer with its protective cover open, showing the LCD display and control buttons.

3.1 Fitur konci

• 28 programmable ON/OFF switching times.
• Minimum switching interval of 1 minute.
• Flexible day and week programming options.
• 12/24-hour display mode.
• Summer time activation function.
• Manual ON/AUTO/OFF operating mode.
• Integrated backup battery for program retention during power outages.
• Protective cover for the control panel.

Figure 2: Product dimensions (3.6 cm width, 8.7 cm height, 6.6 cm depth) and a summary of key features including 28 programs, LCD, 1-minute minimum interval, 1-week maximum, backup battery, manual mode, 12/24-hour display, and summer time function.

3.2 Panel kontrol

Gambar 3: Detil view of the control panel with numbered buttons.

1. P (Program) Key: Used for program selection and setting ON/OFF times.
2. D+ (Day) Key: Adjusts the day of the week during time setting or program setting.
3. H+ (Hour) Key: Adjusts the hour during time setting or program setting.
4. M+ (Minute) Key: Adjusts the minute during time setting or program setting.
5. CLOCK Key: Dianggo pikeun nyetel waktos ayeuna sareng kaluar tina modeu pamrograman.
6. Reset konci: Resets the timer to factory defaults, clearing all programs and settings.
7. MANUAL Key: Toggles between ON, AUTO, and OFF operating modes.

4. Pamasangan

The Bearware Digital DIN Rail Timer is designed for easy mounting on a standard DIN rail (35mm). Ensure all safety precautions are followed before proceeding with installation.

4.1 Pemasangan dina Rel DIN

Figure 4: Illustration demonstrating the correct method for attaching the timer to a DIN rail within a distribution box.

1. Locate an available slot on your DIN rail within the fuse box or distribution box.
2. Sejajarkeun klip pemasangan timer sareng rel DIN.
3. Press the timer firmly onto the rail until it clicks securely into place.

Figure 5: The Bearware Digital DIN Rail Timer shown securely installed on a DIN rail.

4.2 Diagram Wiring

Refer to the wiring diagram printed on the side of the device (also visible in Figure 2, top left corner) for correct electrical connections. The terminals are typically labeled as follows:

• L: Input langsung
• N: Input nétral
• 1, 2: Power supply for the timer (AC220-240V 50/60Hz)
• 3, 4, 5: Switching contacts (3: Common, 4: Normally Open (NO), 5: Normally Closed (NC))

Ensure all connections are tight and correctly insulated. Double-check all wiring before restoring power.

5. Operasi

5.1 Setelan Awal sareng Reset

1. Upon first use or after a long period of inactivity, the display may be blank. Connect the timer to power.
2. Pencét éta RESET button (6 in Figure 3) using a pointed object (e.g., a pen tip) to clear all previous settings and initialize the timer. The display will show 0:00.

5.2 Nyetél Waktos sareng Dinten Ayeuna

1. Pencét jeung tahan tombol JAM button (5 in Figure 3) for approximately 3 seconds. The hour display will start flashing.
2. Ngagunakeun éta H+ button (3 in Figure 3) to set the current hour.
3. Ngagunakeun éta M+ button (4 in Figure 3) to set the current minute.
4. Bari tetep nyekelan teh JAM tombol, pencét éta D+ button (2 in Figure 3) to set the current day of the week (Mo, Tu, We, Th, Fr, Sa, Su).
5. Ngaleupaskeun JAM button to save the current time and day.

5.3 Waktu Pemrograman ON/OFF

The timer allows for up to 28 ON and 28 OFF programs. Each program can be set for individual days or various day combinations.

1. Pencét éta P button (1 in Figure 3). The display will show '1 ON' and the hour will flash.
2. Paké D+ to select the desired day(s) for this program. Options include individual days, all weekdays, weekends, or various combinations (e.g., Mo-Sa, Mo-We, Fr).
3. Paké H+ jeung M+ to set the desired ON time for '1 ON'.
4. Pencét P again. The display will show '1 OFF' and the hour will flash.
5. Paké D+ to select the desired day(s) for this OFF program (usually matching the ON program).
6. Paké H+ jeung M+ to set the desired OFF time for '1 OFF'.
7. Repeat steps 1-6 for additional programs (2 ON, 2 OFF, etc., up to 28 ON/OFF).
8. To exit programming mode and return to the current time display, press the JAM kancing.

5.4 Manual Mode (ON/AUTO/OFF)

The MANUAL button (7 in Figure 3) allows you to override programmed settings temporarily or permanently.

• Pencét MANUAL repeatedly to cycle through the modes:
• Otomatis: The timer operates according to the programmed ON/OFF schedules.
• ON: The connected device is continuously ON, overriding all programs.
• Pareuman: The connected device is continuously OFF, overriding all programs.

5.5 Summer Time Function

To activate or deactivate summer time (Daylight Saving Time):

1. Pencét jeung tahan tombol JAM kancing.
2. Bari nyekelan JAM, pencét tombol H+ button. The display will show 'S' (for Summer Time) and the time will adjust by one hour. Repeat to revert.

6. Pangropéa

The Bearware Digital DIN Rail Timer requires minimal maintenance.

• Bersihkeun alat ku kaen anu lemes sareng garing. Ulah make cleaners abrasive atawa pangleyur.
• Ensure the protective cover is closed when not programming to prevent dust and accidental button presses.
• The internal backup battery is designed for long-term use and typically does not require replacement. It maintains program settings during power outages.

7. Cara ngungkulan

8. Spésifikasi

• merek: Bearware
• Jumlah modél: A304589x61
• Ukuran produk (L x W x H): 3.6 x 8.7 x 6.6 cm
• Beurat barang: 115 g
• Masukan Voltage: AC 220-240V, 50/60Hz
• Kapasitas Ngalihkeun Max: 16A / 3650W
• Beban induktif: Up to 5A (e.g., small motors up to 300W)
• Minimum Switching Interval: 1 menit
• Programmable Times: 28 program ON/OFF
• tampilan: LCD, 12/24-hour mode
• Fitur: Internal backup battery, Summer time function, Manual mode (ON/AUTO/OFF)
• Jangkungna instalasi: 61 mm

9. Garansi jeung Rojongan

Bearware products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

Figure 6: The timer can be used for optimal lighting control, such as for staircase and garage lighting or for access routes.