AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Produk Langkungview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Fitur konci:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Spésifikasi

3. Setup Guide

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Ngabongkar bungkusan

1. Kaluarkeun wadah PC tina bungkusna kalayan ati-ati.
2. Cabut pilem pelindung atanapi bahan kemasan internal naon waé.
3. Teundeun wadahna dina permukaan datar anu stabil.

3.2 Pamasangan motherboard

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Secure the motherboard using the provided screws.

3.3 Pamasangan catu daya

1. Teangan tempat pamasangan catu daya di handapeun tukangeun wadahna.
2. Slide your power supply unit (PSU) into the designated bay.
3. Amankeun PSU nganggo sekrup ti tukangeun casing.

3.4 Pamasangan Girang Panyimpenan

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Pamasangan Kartu Ékspansi (GPU)

1. Leupaskeun panutup slot ékspansi perlu ti pungkur kasus.
2. Selapkeun kartu grafik Anjeun atawa kartu ékspansi séjén kana liang PCIe on motherboard Anjeun.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Sistim cooling

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Manajemén kabel

Ngamangpaatkeun cutouts routing kabel sarta titik dasi-handap balik baki motherboard pikeun ngatur kabel. Ieu ngaronjatkeun aliran hawa jeung estetika.

4. Parentah Operasi

4.1 Powering on / Pareum

• To power on your PC, press the Kakuatan tombol anu aya di panel luhur.
• To power off, either shut down through your operating system or press and hold the Kakuatan tombol pikeun sababaraha detik.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Port USB 3.0 (x1): Pikeun mindahkeun data-speed tinggi.
• Port USB 2.0 (x2): Pikeun nyambungkeun périferal.
• Jack mikropon: Pikeun input audio.
• HD Audio Jack: For audio output (headphones/speakers).
• Tombol Reset: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Pangropéa

Pangropéa rutin ngabantosan mastikeun kinerja optimal sareng umur panjang komponén PC anjeun.

5.1 Lebu Filter beberesih

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 beberesih umum

• Ngusap bagian luar kotak ku lemes, damp lawon. Ngahindarkeun cleaners abrasive.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Cara ngungkulan

Upami anjeun mendakan masalah sareng kasus PC anjeun, pertimbangkeun léngkah-léngkah ngungkulan umum ieu:

• Henteu aya kakuatan: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Fans Teu Spinning/RGB Teu Gawé: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Overheating: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Port Panel Hareup Teu Jalan: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Garansi jeung Rojongan

7.1 Émbaran jaminan

The AeroCool HEXFORMBKV2 PC case comes with a garansi 2 taun for parts. Please retain your proof of purchase for warranty claims.

7.2 Rojongan Téknis

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's websitus atanapi dina bungkusan produk.

• Resmi AeroCool Websitus: www.aerocool.io
• Email Dukungan Palanggan: support@aerocool.io (Kelample, please verify on official websitus)