NETUM L6 Wireless Barcode Scanner User Manual

1. Bubuka

Thank you for choosing the NETUM L6 Wireless Barcode Scanner. This device is designed for efficient and accurate 1D barcode scanning, offering wireless convenience and robust performance. This manual provides essential information for setting up, operating, and maintaining your scanner to ensure optimal functionality.

2. Eusi Paket

Punten parios yén sadaya barang anu didaptarkeun di handap kalebet kana pakét anjeun:

• 1 x NETUM L6 Wireless Barcode Scanner
• 1 x USB Receiver (Wireless Adapter)
• 1 x Kabel Ngecas USB
• 1 x Manual Pamaké

Image 2.1: Contents of the NETUM L6 Wireless Barcode Scanner package.

3. Fitur konci

• Dekoding Gancang: Decodes 200 times per second with superior error correction.
• Konéktipitas nirkabel: 2.4GHz wireless connection with a transmission range of 100-300 meters.
• Hirup batré anu panjang: Built-in 1600mAh lithium-ion battery provides 6-8 hours of continuous operation after a 3-hour charge.
• Nyolok sareng Puter: Mini USB receiver allows for immediate use without driver installation.
• Desain awét: Comfortable button with a service life of up to 5 million presses, resistant to 1.5-meter free fall.
• Scanning serbaguna: Supports 1D barcodes including Codebar, UPC-A/E/E1, ISBN/ISSN, EAN-13/8, Code 39, Industrial 2 of 5, Interleaved 2 of 5, Matrix 2 of 5, MSI/Plessey, UK/Plessey, etc.
• Bidirectional Scan Mode: Enhances scanning flexibility.

4. Parentah Setup

Follow these steps to set up your NETUM L6 Wireless Barcode Scanner:

1. Ngecas Scanner: Connect the scanner to a USB power source using the provided USB charging cable. The charging indicator will illuminate. A full charge takes approximately 3 hours.
2. Sambungkeun Panarima USB: Insert the mini USB receiver into an available USB port on your computer (Desktop or Laptop). The system will automatically detect and install the necessary drivers.
3. Daya Hurung: Press the trigger button on the scanner to power it on. The scanner will automatically attempt to pair with the USB receiver.
4. Test Scanning: Open a text editor or any application that accepts text input. Scan a test barcode. The barcode data should appear in your application.

Image 4.1: Connecting the 2.4GHz USB receiver for wireless operation.

5. Parentah Operasi

The NETUM L6 scanner supports both manual and bidirectional scanning modes.

5.1 Nyeken Dasar

1. Ensure the scanner is powered on and connected to your computer via the USB receiver.
2. Arah jandela panyeken kana barkod anu anjeun hoyong scan.
3. Press and hold the trigger button. A red scan line will emit from the scanner.
4. Position the scan line across the entire barcode. A successful scan will be indicated by an audible beep and/or a visual indicator (e.g., LED flash).
5. The decoded barcode data will be transmitted to your connected device.

Image 5.1: The scanner emitting a red scan line for barcode detection.

5.2 Bidirectional Scanning

The NETUM L6 supports bidirectional scanning, meaning it can read barcodes regardless of the orientation of the scanner relative to the barcode. Simply ensure the scan line covers the entire barcode for successful decoding.

Gambar 5.2: Example of the scanner successfully reading a barcode.

6. Pangropéa

To ensure the longevity and optimal performance of your NETUM L6 Barcode Scanner, follow these maintenance guidelines:

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun bagian luar scanner. Pikeun jandela scanning, anggo lawon pembersih lénsa pikeun nyingkahan goresan. Entong nganggo pembersih atanapi pangleyur anu abrasif.
• Perawatan batré: Avoid fully discharging the battery frequently. Recharge the scanner when the low battery indicator appears. If storing the scanner for an extended period, ensure it has a partial charge (around 50%) and recharge it every few months.
• Panyimpenan: Simpen scanner di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung, suhu anu ekstrim, sareng bahan korosif.
• Penanganan: While the scanner is designed to be durable, avoid dropping it from excessive heights or subjecting it to strong impacts.

7. Cara ngungkulan

If you encounter issues with your NETUM L6 Barcode Scanner, refer to the following common problems and solutions:

• Scanner Not Connecting:
  • Pastikeun yén panarima USB tos aman dicolokkeun kana port USB anu tiasa dianggo.
  • Verify the scanner is powered on and has sufficient battery charge.
  • Coba colokkeun panarima USB kana port USB anu béda.
  • Balikan deui komputer anjeun.
• Scanner Teu Maca Barcode:
  • Pastikeun barkodna bersih, teu ruksak, sareng dicitakna jelas.
  • Make sure the scan line fully covers the barcode.
  • Check the distance between the scanner and the barcode; the optimal scan depth is 10-800mm.
  • Verify that the barcode type is supported by the scanner (1D barcodes only).
  • Ensure there is enough ambient light, but avoid direct glare on the barcode.
• Henteu aya Kaluaran Data:
  • Confirm the scanner is successfully paired with the receiver (indicated by a beep or LED).
  • Open a text editor or application to confirm data input is possible.
  • Check your computer's device manager to ensure the USB receiver is recognized.
• Kahirupan batré pondok:
  • Ensure the scanner is fully charged (approximately 3 hours).
  • Kinarya batre tiasa turun dina waktosna sareng dianggo sacara éksténsif.

8. Spésifikasi

9. Garansi jeung Rojongan

The NETUM L6 Wireless Barcode Scanner comes with a 3 BULAN JAMINAN ti tanggal beuli. Garansi ieu nyertakeun cacad manufaktur sareng gangguan dina panggunaan normal.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the NETUM customer service department. Please have your purchase receipt and product model number (NETUM L6) ready when contacting support.