SENSEA Easy Bathroom Vanity Unit with Sink - L. 70 cm - Natural Oak Effect

Bubuka

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your SENSEA Easy Bathroom Vanity Unit with Sink. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Émbaran Kasalametan

WARNING: Follow the provided installation instructions carefully for safe use and to prevent injury or damage. Improper installation can lead to instability and potential hazards.

• Always ensure the unit is securely fixed to the wall using appropriate fasteners for your wall material.
• Ulah overload laci atawa rak.
• Tetep bagian leutik jauh ti barudak salila assembly.
• Upami aya bagian anu leungit atanapi ruksak, tong teraskeun ngarakitna. Hubungi dukungan palanggan.

Eusi pakét

Verify that all components are present before starting assembly. The package should contain:

• Vanity cabinet (70 cm width, Natural Oak Effect)
• Ceramic sink with integrated overflow
• Adjustable feet (4 units)
• Drawer slides and soft-closing mechanisms
• Assembly hardware (screws, dowels, etc. for cabinet assembly)
• Buku pituduh

Catetan: Wall mounting hardware (screws, washers, wall plugs suitable for your wall material), faucet, and drain assembly (e.g., sliding or click-clack drain) are teu kaasup sarta kudu dibeuli misah.

angka 1: Tutup-up view of the white ceramic sink, showing the faucet hole and integrated overflow.

Setup sareng Instalasi

The SENSEA Easy Bathroom Vanity Unit is designed for straightforward assembly and wall-mounted installation. Follow the steps below and refer to the included assembly guide for detailed diagrams.

Alat Diperlukeun (Teu Kaasup):

• Obeng (Phillips sareng Flathead)
• Drill with appropriate bits for wall material
• Tingkat
• Pita ukur
• Pensil
• Kacamata kaamanan

Léngkah-léngkah Majelis:

1. Buka bungkusan sareng mariksa: Sacara saksama miceun sadaya komponén tina bungkusan. Pariksa karuksakan atawa bagian leungit.
2. Assemble the Cabinet: Follow the step-by-step instructions in the provided assembly guide to construct the vanity cabinet. Ensure all connections are secure.
3. Pasang Kaki anu Bisa Disesuaikeun: Attach the four adjustable feet to the bottom of the cabinet. Adjust their height independently to ensure the cabinet is level and stable on the floor.
4. Pasang Laci: Assemble the drawers and install the soft-closing drawer slides according to the instructions. Insert the drawers into the cabinet.
5. Nyiapkeun pikeun Pasang Tembok: Determine the desired height and position for the vanity. Mark the drilling points on the wall, ensuring they are level.
6. Drill and Secure: Drill holes in the wall using an appropriate drill bit for your wall material. Insert suitable wall plugs (not included). Secure the vanity to the wall using screws and washers (not included). This step is crucial for stability.
7. Install Sink: Carefully place the ceramic sink onto the vanity cabinet. Ensure it is properly aligned. Apply a silicone sealant (not included) around the edges for a watertight seal, if recommended by the sink manufacturer.
8. Sambungkeun Pipa: Install the faucet and drain assembly (not included) to the sink. Connect the water supply lines and drain pipe according to local plumbing codes. Check for leaks.

Figure 2: Technical drawing illustrating the dimensions of the SENSEA Easy Bathroom Vanity Unit and sink. Cabinet dimensions are approximately 70 cm (width) x 40 cm (depth) x 79.5 cm (height). Sink dimensions are approximately 71.4 cm (width) x 42.4 cm (depth) x 15.5 cm (height).

Figure 3: Detail showing the soft-closing mechanism for drawers and the adjustable feet for leveling the cabinet.

Parentah Operasi

The SENSEA Easy Bathroom Vanity Unit is designed for daily use in a bathroom environment. Its primary functions include providing a washbasin and storage space.

• Using the Sink: Operate your faucet as per its manufacturer's instructions. The integrated overflow helps prevent water from spilling if the drain is blocked.
• Ngagunakeun Laci: The unit features two drawers with soft-closing mechanisms. Gently push the drawers to close them; the soft-closing feature will engage automatically to ensure a quiet and smooth closure.
• Panyimpenan: Utilize the drawers for organizing toiletries, cleaning supplies, and other bathroom essentials. Avoid placing excessively heavy items in the drawers to maintain their smooth operation and structural integrity.

Gambar 4: Top-handap view of the SENSEA Easy Bathroom Vanity Unit with sink and open drawers, showcasing storage capacity for toiletries.

Figure 5: Complete bathroom setup featuring the SENSEA Easy Bathroom Vanity Unit alongside a matching tall storage cabinet, demonstrating its aesthetic integration into a bathroom space.

Pangropéa

Regular cleaning and proper care will ensure the longevity and appearance of your vanity unit.

• beberesih Kabinet: Wipe the engineered wood surfaces with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or excessive moisture, which can damage the finish.
• Sink Cleaning: Clean the ceramic sink with standard bathroom cleaners. Rinse thoroughly after cleaning to prevent residue buildup.
• Tumpahan: Immediately wipe up any water spills or splashes on the cabinet surfaces to prevent water damage.
• Mékanisme Laci: Periodically check the drawer slides and soft-closing mechanisms for smooth operation. If needed, clean any dust or debris and apply a silicone-based lubricant sparingly.
• Suku anu tiasa disaluyukeun: Ensure the adjustable feet remain stable and level. Re-adjust if the unit becomes wobbly.

Pamérésan masalah

spésifikasi

Gambar 6: Hareupeun view of the SENSEA Easy Bathroom Vanity Unit with sink, highlighting FSC certification and overall dimensions.

Figure 7: FSC certification logo, indicating the use of wood from responsible sources in the product's construction.

Garansi sareng Rojongan

Rincian jaminan khusus biasana disayogikeun sareng dokuméntasi pameseran anjeun atanapi dina resmi produsén websitus. Mangga tingal sumber daya éta pikeun inpormasi garansi anu lengkep.

For technical assistance, missing parts, or any other inquiries, please contact SENSEA customer support through their official channels. Contact information can usually be found on the product packaging or the brand's websitus.