1. Émbaran Kasalametan
Please read and understand all instructions before attempting to install, operate, or maintain this product. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Always disconnect power at the service panel before working on the fan.
- Sadaya kabel kedah saluyu sareng kode sareng standar listrik lokal.
- This fan is suitable for use over a bathtub or shower when connected to a GFCI (Ground Fault Circuit Interrupter) protected branch circuit.
- Entong nganggo kipas ieu sareng alat kontrol laju solid-state kecuali disatujuan sacara khusus.
- Pastikeun grounding ditangtoskeun pikeun nyegah shock listrik.
- Anggo kacamata sareng sarung tangan kaamanan nalika dipasang.
2. Produk Langkungview
The Akicon BPT14-80CL Bathroom Exhaust Fan with Light is designed to provide efficient ventilation and illumination for your bathroom. It features an ultra-quiet operation and a selectable LED light to enhance comfort and functionality.
Fitur konci:
- Konstruksi kualitas luhur: Features a black-coated galvanized steel casing and a durable copper ball-bearing motor for long-lasting performance.
- Operasi sepi: Operates at a low noise level of 2.0 sones, effectively removing odors and humidity from spaces up to 80 square feet.
- Lampu LED Hemat Énergi: Includes selectable LED lights with color temperatures of 3000K, 4000K, and 5000K, providing ample brightness for your bathroom. The fan and light can be wired to operate jointly or separately.
- Pamasangan Gampang: Designed for straightforward installation or replacement, even without attic access.
Image: Akicon Bathroom Exhaust Fan highlighting key features.
3. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Akicon |
| Ngaran modél | BPT14-80CL |
| Warna | Minyak Digosok Perunggu |
| Desain kipas listrik | Kipas Angin |
| Sumber Daya | AC |
| Gaya | Modern |
| Dimensi produk | 13 "D x 13" W x 7.75" H |
| Tipe Kamar | Kamar mandi |
| Fitur husus | Lampu LED |
| Dianjurkeun Mangpaat | Sirkulasi hawa |
| Tingkat Noise | 2 Sora |
| Wattage | 27.6 watt |
| Tipe rengse | Minyak Dibungkus |
| Kapasitas Aliran Udara | 80 Kaki Kubik Per Menit (CFM) |
| Laju | 1 rpm |
| Pindah Tipe | Pencét Tombol |
| Komponén Kaasup | Kit Lampu |
| Pamakéan jero rohangan / outdoor | jero rohangan |
| Spesifikasi Met | HVI, UL |
| Métode kontrol | Remote (if applicable, check product details) |
| Efisiensi | Luhur |
| Dupi Tanpa kabel? | No |
| Jumlah Tingkat Daya | 1 |
| Tipe Motor | Copper Ball-Bearing Motor |
| Tipe Pamasangan | DIY |
| Item Beurat | 12.2 pon |
| Tipe Pamasangan | Gunung siling |
Image: Detailed specifications including airflow, sound level, and light temperature options.
4. Pamasangan
This section provides detailed instructions for installing your Akicon bathroom exhaust fan. Ensure you have all necessary tools and safety equipment before beginning.
Cék Pra-Pasang:
- Verify that your soffit or attic has sufficient space for the fan housing.
- Housing Dimensions: 8-1/2" x 8-1/2" x 5-3/4".
- Light Cover Diameter: 13 inches.
- Ceiling Opening Size: 9" x 9".
Image: Installation dimensions and requirements.
Image: Technical dimensions of the fan unit.
Installation Steps (with attic access):
- Nyiapkeun bubuka: Starting next to a joist, trace an outline for the housing. Use a drywall saw to cut the opening to the required size (9"x9").
- Perumahan Aman: Screw the fan housing into the joists using appropriate fasteners.
- Sambungkeun Saluran: Attach the ventilation duct to the fan's duct connector. Apply HVAC tape over the connection to ensure an airtight seal.
- Kawat listrik: Connect the house wires to the fan wires. Remember to connect black to black, white to white, and ground to ground. Place insulation over and around the fan housing.
- Sambungan cahaya: Plug in the light connection cable.
- Pasang Grille sareng Lampu: Install the grille, screw in the LED bulbs, and then attach the glass cover.
Installation Steps (no attic access):
If attic access is not available, this model allows for installation from below the ceiling.
- Remove Motor: Disconnect the wires connecting the motor to the housing. Remove the fixing screws on the outside of the housing to detach the motor assembly.
- Insert Perumahan: After connecting the ventilation duct, send the housing into the ceiling opening.
- Perumahan Aman: Secure the housing to the joist from below the ceiling using appropriate screws.
- Sambungkeun kawat: Connect the wires correctly according to the label on the wires.
- Reinstall Motor: Reinstall the motor back into the housing and connect the plugs.
- Pasang Grille sareng Lampu: Install the grille, screw in the LED bulbs, and then attach the glass cover.
Pidéo Pamasangan:
Video: Step-by-step installation guide for the Akicon Bathroom Exhaust Fan with Light (Model OH1480).
5. Parentah Operasi
The Akicon BPT14-80CL fan and light can be operated independently or together, depending on how they were wired during installation.
- Operasi Kipas: Use the designated wall switch to turn the exhaust fan ON or OFF. The fan will remove moisture and odors from the room.
- Operasi cahaya: Use the designated wall switch to turn the LED light ON or OFF.
- Pilihan Suhu Warna: The LED light offers three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To change the color temperature, locate the toggle switch on the fan housing (typically accessible by removing the glass cover) and slide it to your desired setting.
6. Pangropéa
Pangropéa rutin ngajamin kinerja optimal sareng umur panjang kipas knalpot anjeun.
beberesih:
- Pegatkeun Daya: Pareuman heula daya dina pemutus sirkuit sateuacan diberesihan.
- Remove Grille and Cover: Carefully remove the glass cover and the decorative grille.
- Komponén bersih: Wash the grille and glass cover with mild soap and water. Wipe the fan blades and interior of the housing with a damp lawon. Pastikeun sadaya bagian garing pisan sateuacan dipasang deui.
- Pasang deui: Reattach the grille and glass cover.
Ngagantian bohlam:
The LED bulbs in this unit are user-replaceable.
- Pegatkeun Daya: Pareuman kakuatan dina circuit breaker.
- Cabut Panutup Kaca: Gently twist and remove the glass cover.
- Ngaganti Bulbs: Unscrew the old bulbs and screw in new compatible LED bulbs.
- Pasang deui Panutup: Reattach the glass cover by twisting it back into place.
Image: Illustration of LED bulb and panel types, relevant for bulb replacement.
7. Cara ngungkulan
If you encounter issues with your Akicon exhaust fan, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Fan teu beroperasi | Henteu aya kakuatan pikeun unit Sambungan kabel leupas Kasalahan motor | Pariksa circuit breaker jeung switch témbok. Pastikeun sadaya sambungan kabel aman (pastikeun kakuatan pareum heula). Hubungi layanan palanggan upami motorna rusak. |
| Lampu teu hurung | Bohlam leupas Bohlam kaduruk Sambungan kabel leupas | Ensure bulbs are screwed in tightly. Ngaganti bulbs. Verify light connection plug and wiring (ensure power is off first). |
| Noise kaleuleuwihan salila operasi | screws ningkatna leupas Halangan dina bilah kipas Masalah motor | Tighten ningkatna screws. Turn off power and remove any debris from fan blades. Contact customer support if noise persists after checking. |
| Cahya ngageleber | Sambungan bohlam leupas Bohlam salah Masalah kabel | Ensure bulbs are screwed in tightly. Ngaganti bulbs. Check wiring connections (ensure power is off first). |
8. Garansi jeung Rojongan
The Akicon BPT14-80CL Bathroom Exhaust Fan comes with a jaminan kualitas 3 taun. It is HVI-certified and UL listed for installation over showers and tubs with GFCI protection.
For any questions, problems, or missing parts, please contact Akicon Customer Service. Our service hours are 8 a.m. to 6 p.m. EST, Monday-Friday.
You can reach Akicon Customer Service through the seller 'Office&Home Improvement' on Amazon or via the contact information provided with your product packaging.
