LEDVANCE Linear LED Shelf Light 400mm

1. Bubuka

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Mangga baca manual ieu tuntas saméméh instalasi tur nyimpen eta pikeun rujukan ka hareup.

2. Parentah Kasalametan

• Kasalametan listrik: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Dimaksudkeun pamakéan: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Peunteun IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Sumber cahaya: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Penanganan: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• beberesih: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Asesoris sambungan

4. Spésifikasi

Catetan: Spésifikasi tiasa robih tanpa aya bewara.

5. Setup jeung Instalasi

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Nyiapkeun Area Instalasi: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Pegatkeun Daya: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Tanda titik pangeboran: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. liang bor: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
5. Gantelkeun kurung dipasang: Pasangkeun braket pemasangan kana témbok nganggo sekrup anu disayogikeun. Pastikeun éta dipasang pageuh.
6. Sambungan listrik: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Pasang Perlengkapan: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Mulangkeun Daya: Sakali fixture geus aman dipasang na kabel, balikkeun kakuatan dina breaker circuit utama.

6. Parentah Operasi

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Operasi otomatis: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Pareuman otomatis: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Panempatan sénsor: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Pangropéa

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• beberesih: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the fixture.
• Pamariksaan: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Sumber cahaya: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Cara ngungkulan

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Lampu teu hurung:
  • Pariksa lamun catu daya disambungkeun jeung circuit breaker hurung.
  • Ensure the wiring connections are secure.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Light Stays On Continuously:
  • Pastikeun teu aya gerakan anu terus-terusan dina rentang deteksi sénsor.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Light Flashes or Flickers:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Pastikeun voltage supply is stable and within the specified range (240V).

Upami léngkah-léngkah ieu henteu ngabéréskeun masalahna, hubungi dukungan palanggan.

9. Garansi jeung Rojongan

This LEDVANCE Linear LED Shelf Light comes with a Garansi 2 taun ti tanggal dibeuli, ngawengku defects dina bahan jeung workmanship dina pamakéan normal.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official websitus atanapi pangecér tempat produk éta dipésér. Mangga siapkeun bukti pameseran sareng nomer modél produk anjeun.