Buku Panduan Pangguna Adexa JC70 Wine Cooler

Bubuka

Thank you for choosing the Adexa JC70 Wine Cooler. This premium wine cooler is designed to provide optimal storage conditions for your wine collection, ensuring a stable temperature and an elegant display. This manual provides essential information for the safe and efficient operation of your appliance. Please read it thoroughly before use and keep it for future reference.

Émbaran Kasalametan

Pikeun ngirangan résiko kahuruan, sengatan listrik, atanapi tatu nalika nganggo pendingin anggur anjeun, turutan tindakan pencegahan dasar ieu:

• Baca sadaya parentah sateuacan nganggo alat.
• Ulah noél surfaces tiis, utamana lamun alat keur operasi.
• Pastikeun alatna dibumikeun leres.
• Do not use abrasive cleaners or sharp objects to clean the interior.
• Tetep bukaan ventilasi jelas tina halangan.
• Cabut colokan cooler anggur sateuacan beberesih atanapi ngalakukeun perawatan naon waé.
• Alat ieu henteu dimaksudkeun pikeun dianggo ku jalma (kalebet murangkalih) anu ngirangan kamampuan fisik, indrawi atanapi mental, atanapi kirang pangalaman sareng pangaweruh, kecuali aranjeunna dipasihan pangawasan atanapi petunjuk ngeunaan panggunaan alat ku jalma anu tanggung jawab kana kasalametanana.

Produk Leuwihview

The Adexa JC70 Wine Cooler features a sleek black design with a digital control panel and compressor cooling technology. It is designed to store up to 24 standard wine bottles.

Gambar 1: Hareupeun view of the Adexa JC70 Wine Cooler, showcasing its elegant black finish and glass door with visible wine bottles.

Figure 2: The Adexa JC70 Wine Cooler with its door open, revealing the interior shelving system designed for optimal bottle storage.

Fitur konci:

• Capacity: 24 standard wine bottles
• Cooling System: Compressor cooling for stable temperature
• Temperature Range: +5°C to +18°C (41°F to 64.4°F)
• Kontrol: panel kontrol digital
• Design: Sleek black finish
• Certifications: CE / CB / RoHS / REACH / ETL

Disetél

1. Ngabongkar bungkusan: Carefully remove all packaging materials. Keep the original packaging for future transport or storage.
2. panempatan: Place the wine cooler on a flat, stable surface away from direct sunlight and heat sources (e.g., oven, radiator). Ensure there is adequate ventilation around the unit (at least 10 cm / 4 inches clearance on sides and back).
3. Leveling: Saluyukeun suku pangrata di handapeun unit pikeun mastikeun éta rata sampurna. Ieu penting pisan pikeun operasi sareng panyelarasan panto anu leres.
4. Sambungan Daya: Colokkeun kabel listrik kana stop kontak listrik khusus anu di-ground. Ulah nganggo kabel ekstensi atanapi adaptor.
5. Operasi awal: Allow the wine cooler to stand upright for at least 2-4 hours before plugging it in. This allows the refrigerant to settle. After plugging in, let the unit run empty for a few hours to reach the desired temperature before loading bottles.

Parentah Operasi

Panel Kontrol Digital:

The digital control panel is located on the top front of the unit. It allows you to set and monitor the internal temperature.

• Suhu Témbong: Némbongkeun suhu internal ayeuna.
• Tombol Pangaturan Suhu (Panah luhur/handap): Press to increase or decrease the desired temperature. The temperature range is +5°C to +18°C.
• Tombol Lampu: Controls the interior LED light. Press to turn on/off.

Loading Bottles:

• Arrange bottles on the shelves to allow for proper air circulation.
• Avoid overloading the shelves.
• Ensure the door closes completely after loading or removing bottles.

Pangropéa

beberesih:

• Interior: Unplug the unit. Clean the interior with a soft cloth and a solution of mild detergent and warm water. Rinse thoroughly and dry completely before plugging back in.
• Luar: Ngusap luar ku hipu, damp cloth. For the glass door, use a glass cleaner.
• Coil kondensor: Periodically clean the condenser coils at the back or bottom of the unit with a soft brush or vacuum cleaner to ensure efficient operation.

Defrosting:

The wine cooler features an automatic defrost function. However, if excessive ice buildup occurs, manually defrost the unit by unplugging it and leaving the door open until the ice melts. Clean and dry the interior before restarting.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: Adexa