VOYEE Wireless Pro Controller User Manual

Bubuka

This manual provides comprehensive instructions for the VOYEE Wireless Pro Controller, compatible with Nintendo Switch, Switch Lite, Switch OLED, and PC (wired mode). Please read this manual carefully before use to ensure optimal performance and longevity of your controller.

Fitur konci:

• Compatible with Switch/Lite/OLED/PC Windows (wired mode).
• Programming Custom Buttons (M1/M2) for up to 16 key mappings.
• 3-level Turbo speed for enhanced gaming.
• 4-level Rumble Control and 6-axis Gyro Sensor for immersive gameplay.
• Ergonomic design for comfortable long-term use.
• Large capacity battery (600mAh) providing up to 15 hours of gaming.
• 33ft wireless control range.

Guide Setup

Eusi pakét:

• 1 x VOYEE Pro Controller
• 1 x Kabel Ngecas Tipe-C
• 1 x Manual Pamaké (dokumén ieu)

Connecting to Nintendo Switch/Switch Lite/Switch OLED:

1. Ensure your Switch console is powered on and updated to the latest system version.
2. Tina Menu RUMAH, pilih Controllers > Robah Pakem / Orde.
3. Dina controller, pencét jeung tahan tombol Tombol imah (house icon) and the Tombol Y simultaneously for 3-5 seconds until the 4 LED indicators start flashing rapidly.
4. Sakali nyambung, LED pamuter anu saluyu dina controller bakal hurung padet.

Tip: If connection is difficult, try connecting the controller to the Switch dock via the Type-C cable first, then disconnect the cable and turn the controller on. This can help establish the initial wireless connection.

Connecting to PC (Wired Mode):

1. Connect the controller to your PC using the provided Type-C USB cable.
2. The controller will be recognized as a standard gamepad.
3. Ensure necessary drivers are installed if prompted by your operating system.

Image: Visual guide for connecting the VOYEE controller to Nintendo Switch (wireless) and PC (wired).

Ngecas Controller:

Connect the controller to a USB power source (e.g., Switch dock, PC, USB wall adapter) using the Type-C cable. The LED indicators will show charging status and turn off when fully charged. A full charge takes approximately 2-3 hours and provides 10-15 hours of runtime.

Image: The VOYEE Switch Controller in Red and Blue color scheme, showcasing desain ergonomis na perenah tombol.

Image: Illustration of the controller's large capacity 600mAh battery, indicating 2-3 hours for full charge and 10-13 hours of runtime.

Parentah Operasi

Motion Control (6-Axis Gyro Sensor):

The built-in 6-axis gyro sensor allows for precise motion control in compatible games. Tilt and move the controller to interact with game environments and characters.

Image: A user holding the VOYEE controller, demonstrating the 6-axis gyro motion control feature in a racing game scenario.

Vibration Adjustment (Rumble Control):

The controller features 4-level adjustable vibration feedback. To cycle through vibration levels (None, Low, Medium, High), press and hold the Tombol Turbo sarta pencét éta Tombol luhur on the D-pad.

Image: Visual representation of the controller's 3-level vibration feature, showing different intensity levels for various in-game actions like collision, take-off, and fighting.

Fungsi Turbo:

The Turbo function allows for rapid, continuous input of a button press. There are 3 adjustable Turbo speeds.

Setélan Turbo:

1. Pencét jeung tahan tombol Tombol Turbo.
2. While holding Turbo, press the button you wish to set to Turbo (e.g., A, B, X, Y, L, R, ZL, ZR).
3. Release both buttons. The selected button will now activate Turbo when held down.

Nyaluyukeun Speed ​​Turbo:

1. Pencét jeung tahan tombol Tombol Turbo.
2. While holding Turbo, press the Tombol katuhu on the D-pad to cycle through the 3 speeds (5 shots/s, 12 shots/s, 20 shots/s).

Clearing Turbo:

1. To clear Turbo for a single button: Press and hold the Tombol Turbo, then press the button that has Turbo enabled.
2. To clear all Turbo settings: Press and hold the Tombol Turbo salila 5 detik.

Image: Diagram illustrating the 3-level Turbo speed setting, showing how to activate and adjust the rapid fire function for various buttons.

Programming Custom Buttons (M1/M2):

The M1 and M2 buttons on the back of the controller can be programmed to map up to 16 key inputs, allowing for complex actions with a single press.

Setting M1/M2:

1. Pencét jeung tahan tombol M1 or Tombol M2 Anjeun hoyong program.
2. While holding M1/M2, press the sequence of buttons you want to map (e.g., A+B+X+Y).
3. Release the M1/M2 button. The sequence is now saved.

Clearing M1/M2:

1. Pencét jeung tahan tombol M1 or Tombol M2 for 5 seconds until the controller vibrates. This will clear the programmed sequence for that button.

Gambar: Deukeut view of the back of the controller highlighting the M1 and M2 programmable buttons, with an explanation of how to map up to 16 buttons for "One-Click Ultimate Skill".

Fungsi Screenshot:

Pencét éta Tombol screenshot (square icon) to capture in-game screenshots.

Fungsi Wake-up:

When the Switch console is in sleep mode, press the Tombol imah on the controller to wake up the console and reconnect the controller.

Pangropéa

beberesih:

Wipe the controller with a soft, dry cloth. Do not use abrasive cleaners or solvents. For stubborn dirt, a slightly damp lawon bisa dipaké, dituturkeun ku drying langsung.

Panyimpenan:

Simpen controller di tempat anu tiis, garing, sareng jauh tina sinar panonpoé langsung sareng suhu anu ekstrim. Hindarkeun neundeun barang beurat dina controller.

Perawatan batré:

• Hindarkeun sering-sering ngeusi batre.
• If storing for an extended period, charge the battery to about 50% every few months to prevent deep discharge.
• Do not expose the battery to high temperatures or attempt to disassemble it.

Pamérésan masalah

Kontroler Teu Nyambung/Ngapasangkeun:

• Pastikeun controller dieusi.
• Verify the Switch console is updated to the latest system version.
• Try the "plug into dock then disconnect" method described in the Setup section.
• Reset the controller by inserting a thin object into the small reset hole on the back (near M1/M2 buttons).
• Pastikeun teu aya alat nirkabel sanés anu nyababkeun gangguan.

Buttons Not Responding/Lagging:

• Pariksa tingkat batré.
• Ensure you are within the 33ft wireless range.
• Reset pangontrolna.
• Clean around the buttons if there's visible debris.

Geter Teu Gawé:

• Check the vibration level setting (Turbo + D-pad Up).
• Ensure the game supports rumble feedback.
• Reset pangontrolna.

spésifikasi

Garansi sareng Rojongan

VOYEE products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official VOYEE website or contact customer service through your point of purchase.

Versi digital tina pituduh pamaké ieu sadia pikeun diundeur: VOYEE Switch Controller User Guide (PDF)

Visit the official VOYEE Store for more products and information: VOYEE Store