Okin Recliner Hand Control User Manual

1. Produk Langkungview

This manual provides instructions for the Okin Oval Shape 2 Button Hand Control Handset, designed as a replacement part for power recliners, lift chairs, and electric sofas. It features a 5-pin plug for connection to the recliner motor and two buttons for operation.

Figure 1: Okin Oval 2 Button Recliner Hand Control with its attached cable and 5-pin plug.

2. Émbaran Kasalametan

PERHATOSAN:

• This is a replacement part for a power recliner. Always follow the manufacturer's instructions for safe installation and operation of your recliner.
• Keep the control away from water and other liquids to prevent electrical hazards.
• Do not attempt to repair or modify the electrical components of the hand control.
• In case of a malfunction, disconnect power to the recliner and contact a qualified technician or customer support immediately.

3. Setup jeung Instalasi

Before installation, ensure the power to your recliner is disconnected from the wall outlet.

1. Identipikasi Port Konéksi: Locate the existing hand control's connection port on your recliner's motor or control box. This is typically a 5-pin circular port.

Figure 2: The 5-pin plug of the hand control, designed for secure connection.
2. Connect the Hand Control: Align the 5-pin plug of the new Okin hand control with the corresponding port on your recliner. Gently push the plug in until it is firmly seated. The plug is designed with a 90-degree angle for easy connection in tight spaces.


Figure 3: Visual guide for connecting the 5-pin curved plug to the recliner motor.

3. Secure the Control (if applicable): If your recliner has a designated slot for the oval-shaped control, insert it securely. The control may come with a separate bezel for a flush fit.


Figure 4: The hand control shown with its removable oval bezel, which helps secure it in place.

4. Mulangkeun Daya: Once the control is securely connected, plug your recliner back into the wall outlet.

4. Parentah Operasi

The Okin Oval 2 Button Hand Control is designed for simple and intuitive operation of your power recliner.

Figure 5: The two-button interface of the hand control, with visible indicator lights.

• Indikator kakuatan: A lampu LED héjo indicates that the control is receiving power.
• Indikator Operasi: An orange LED light illuminates when a button is pressed, indicating that an operation command is being sent to the motor.
• Fungsi Tombol:
  • Pencét éta tombol luhur to extend the recliner footrest and recline the backrest.
  • Pencét éta tombol handap to retract the recliner footrest and return the backrest to the upright position.

5. Pangropéa

To ensure the longevity and proper functioning of your Okin hand control, follow these simple maintenance guidelines:

• beberesih: Wipe the surface of the hand control with a clean, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the control. Do not use abrasive cleaners or solvents.
• Pamariksaan kabel: Periodically check the cable for any signs of wear, fraying, or damage. If damage is observed, discontinue use and seek a replacement.
• Pariksa sambungan: Ensure the 5-pin plug remains firmly connected to the recliner motor. A loose connection can lead to intermittent operation.
• Kaayaan Lingkungan: Avoid exposing the control to extreme temperatures, direct sunlight for prolonged periods, or high humidity.

6. Cara ngungkulan

Upami anjeun ngalaman masalah sareng kontrol leungeun Okin anjeun, tingal masalah sareng solusi umum ieu:

Upami léngkah ngungkulan henteu ngabéréskeun masalah, mangga ngahubungi dukungan palanggan.

7. Spésifikasi

8. Rojongan Palanggan

For any questions, concerns, or assistance with your Okin Recliner Hand Control, please contact our dedicated support team. We are committed to ensuring a seamless setup process and satisfactory experience.

Refer to your product packaging or the retailer's websitus kanggo inpormasi kontak khusus.