1. Bubuka
The Elitech MTC-5060 is a digital temperature controller designed for precise temperature management in cold storage environments such as cold rooms and refrigerators. It features dual screens for simultaneous display of current and set temperatures, along with indicator lights for operational status. The controller supports both cooling and defrosting functions, offering comprehensive temperature control capabilities.
This manual provides detailed instructions for the installation, operation, and maintenance of your MTC-5060 temperature controller. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Émbaran Kasalametan
- Ensure the power supply matches the controller's specifications (110VAC±10%, 50Hz/60Hz).
- All wiring should be performed by a qualified electrician to prevent electric shock or damage to the unit.
- Do not operate the controller in environments with excessive humidity or corrosive gases.
- Disconnect power before performing any maintenance or wiring.
- Controller dirancang pikeun pamakéan indoor wungkul.
3. Fitur Produk
- Dual tampilan: Shows current room temperature and set temperature simultaneously.
- Cooling and Defrosting Control: Manages both refrigeration and defrosting cycles.
- Akurasi luhur: Utilizes a high-precision sensor and chip for stable performance and minimal drift.
- Antarmuka anu ramah-pamaké: Multi-functional button panel for easy parameter setting and operation.
- Fungsi Alarm: Includes high/low temperature alarm and sensor error alarm.
- EMC Standard Compliance: Passed industrial four-level tests for stable and reliable operation in harsh environments.
Gambar 3.1: Hareupeun view of the Elitech MTC-5060 controller, illustrating the dual temperature display and control buttons.
4. Eusi Paket
Mangga parios eusi bungkusan nalika nampi. Upami aya barang anu leungit atanapi ruksak, langsung hubungi supplier anjeun.
- Elitech MTC-5060 Digital Temperature Controller (1 unit)
- NTC Sensor Probe (1 unit)
- Manual pamaké (1 salinan)
5. Instalasi jeung Wiring
5.1 Pamasangan
The MTC-5060 controller is designed for panel mounting. Ensure adequate space for ventilation and access to wiring terminals.
- Ukuran Panel hareup: 10.2 cm (L) x 5.1 cm (W)
- Ukuran produk: 10.2 cm (L) x 5.1 cm (W) x 8.3 cm (D)
- Installing Hole Size: 9.2 cm (L) x 4.4 cm (W)
Figure 5.1: Physical dimensions of the MTC-5060 controller.
Figure 5.2: Required mounting hole dimensions for installation.
5.2 Diagram Wiring
Refer to the wiring diagram below for correct electrical connections. Ensure all connections are secure and comply with local electrical codes. The controller operates on 110VAC.
Figure 5.3: Wiring diagram for the MTC-5060 controller. Terminals 1-2 for power, 3-5 for sensors, 6-9 for output loads (cooling and defrosting).
- Sasayogian tanaga: Connect 110VAC to terminals 1 and 2.
- Sambungan sénsor: Connect the NTC sensor(s) to the designated terminals (e.g., 3, 4, 5). The MTC-5060 supports two sensors for storage temperature and defrosting temperature.
- Beban kaluaran: Connect cooling and defrosting loads to the respective relay output terminals (e.g., 7-8 for cooling, 8-9 for defrosting). The relay output contact capacity is 3A/110VAC.
6. Parentah Operasi
The MTC-5060 features a user-friendly interface with dedicated buttons for common functions and parameter settings.
6.1 Tampilan jeung Indikator
The controller has two digital displays:
- Tampilan luhur: Nunjukkeun suhu kamar ayeuna.
- Tampilan handap: Némbongkeun suhu set.
Indicator lights provide visual feedback on the operating mode (e.g., cooling, defrosting).
6.2 Nyetel Suhu
- Pencét éta Nyetél tombol pikeun view suhu set ayeuna.
- While the set temperature is displayed, use the Up jeung Turun arrow buttons to adjust the desired temperature value.
- Pencét éta Nyetél button again to confirm and save the new setting.
6.3 Defrosting Control
The MTC-5060 supports automatic and manual defrosting.
- Defrost otomatis: Configured through parameters (defrost cycle, defrost time). Refer to the detailed parameter settings section (if available in full manual) for adjustment.
- Defrost Manual: Pencét éta Forced Def. button to initiate a manual defrost cycle.
Figure 6.1: Illustrates the "Forced Def." button for manual defrost initiation.
6.4 Parameter Setélan
Advanced parameters such as compressor delay, defrost cycle, defrost time, and temperature calibration can be accessed and adjusted. Consult the full product manual for a complete list of parameters and their functions.
Note: Incorrect parameter settings can affect the performance and safety of your refrigeration system. Proceed with caution when adjusting advanced settings.
7. Spésifikasi
| Parameter | Nilai |
|---|---|
| Sasayogian tanaga | 110VAC±10%, 50Hz/60Hz |
| Rentang Ukur Suhu | -50°C nepi ka 50°C |
| Temperature Controlling Range | -50°C nepi ka 50°C |
| Akurasi | ± 1 ° C |
| Resolusi | 0.1°C |
| Relay Output Contact Capacity | 3A / 110VAC |
| Suhu Operasi | 0°C nepi ka 60°C |
| Kalembaban rélatif | 20%-85% (Euweuh kondensasi) |
| Tipe sénsor | NTC (10KΩ/25°C, nilai B = 3435K) |
| Sensor Probe Length | 2 méter (7.87 inci) |
| Ukuran Panel hareup | 10.2 cm (L) x 5.1 cm (W) |
| Dimensi produk | 10.2 cm (L) x 5.1 cm (W) x 8.3 cm (D) |
| Installing Hole Size | 9.2 cm (L) x 4.4 cm (W) |
| Nomer modél | MTC-5060 |
| Produsén | Elitech |
8. Pangropéa
To ensure the longevity and optimal performance of your Elitech MTC-5060 controller, follow these maintenance guidelines:
- beberesih: Regularly wipe the front panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Pamariksaan: Pariksa sadaya sambungan kabel sacara berkala pikeun ayana pageuh sareng tanda-tanda karusakan atanapi karusakan.
- Cék sénsor: Ensure the temperature sensor is clean and properly positioned for accurate readings.
- Lingkungan: Maintain the operating environment within the specified temperature and humidity ranges to prevent condensation and ensure reliable operation.
9. Cara ngungkulan
This section provides solutions to common issues you might encounter with your MTC-5060 controller.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Controller teu hurung. | Teu aya catu daya atanapi kabelna salah. | Check power connections (terminals 1 & 2) and ensure 110VAC supply. Verify wiring against diagram. |
| Temperature display is inaccurate or shows "EE". | Sensor error or faulty sensor. | Check sensor connections. Ensure the sensor is not damaged. Replace sensor if necessary. Perform temperature calibration if readings are consistently off. |
| Cooling/Defrosting not activating. | Incorrect set temperature, parameter settings, or faulty output relay. | Verify set temperature and differential. Check relevant parameters (e.g., compressor delay, defrost cycle). Inspect wiring to the cooling/defrosting load. |
| High/Low temperature alarm triggers frequently. | Alarm limits set too close to operating temperature or actual temperature fluctuation. | Adjust high/low temperature alarm limits. Investigate the cause of temperature fluctuations in the controlled environment. |
If the problem persists after attempting these solutions, please contact Elitech customer support for further assistance.
10. Garansi jeung Rojongan
Elitech Technology, Inc. warrants this product to be free from defects in materials and workmanship for a period specified by your regional distributor from the date of purchase. This warranty does not cover damage caused by improper installation, misuse, unauthorized modification, or natural disasters.
For technical support, warranty claims, or service inquiries, please contact your local Elitech distributor or visit the official Elitech websitus pikeun inpo kontak.
Pabrikan: Elitech
model: MTC-5060
