Elgato Wave Mic Arm LP Instruksi Manual

1. Bubuka

The Elgato Wave Mic Arm LP is a premium low-profile microphone arm designed to enhance your audio setup for podcasting, streaming, gaming, and home office use. Its robust, all-metal construction ensures durability, while its innovative design keeps your workspace clear and your microphone precisely positioned.

Image: The Elgato Wave Mic Arm LP, a low-profile microphone arm, shown with a microphone attached, extending horizontally across a desk.

2. Naon dina Box

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Wave Mic Arm LP
• 1/4 "pikeun 3/8" adaptor
• 1/4 "pikeun 5/8" adaptor
• Allen rengkuh
• Gancang Mimitian Guide

Image: All components included in the box: the Wave Mic Arm LP, various thread adapters, an Allen wrench, and the quick start guide.

3. Fitur konci

• Desain Premium: All-metal, anti-torsion construction for durability and stability.
• Pro lowfile: Designed to sit below the shoulder line, ensuring an unobstructed view tina workspace Anjeun.
• Cable Channels: Integrated magnetic covers provide easy access and keep cables neatly organized.
• Pinuh adjustable: Offers 360-degree horizontal rotation and 90-degree upper vertical rotation for maximum maneuverability.
• Jangkauan Panjang: Provides a horizontal reach of 740 mm (29.1 inches) to cover large desks.
• Méja Clamp: Expandable up to 60 mm (2.4 inches) for secure mounting.
• Kasaluyuan: Works with 1/4", 3/8", and 5/8" threads, supporting microphones up to 2 kg (4.4 lbs).

Gambar: The low-profile design of the mic arm, positioned beneath a monitor, keeping the desk clear.

Image: Diagrams illustrating 360-degree horizontal rotation and 90-degree up/60-degree down vertical rotation.

Gambar: A close-up view of the magnetic cable channels, showing a cable routed neatly inside the arm.

Image: An illustration highlighting the horizontal reach, padded clamp, ball head, and maximum load capacity of 4.4 lbs (2 kg).

4. Parentah Setup

1. Ngagantelkeun Meja Clamp: Ngamankeun meja clamp to the edge of your desk. Ensure the clamp diketatkeun pageuh pikeun nyegah gerakan. Cl-naamp can expand up to 60 mm (2.4 inches).
2. Insert Mic Arm: Slide the base of the Wave Mic Arm LP into the desk clamp.
3. Pasangkeun Mikropon: Screw your microphone onto the ball head at the end of the arm. Use the provided 1/4" to 3/8" or 1/4" to 5/8" adapters if your microphone requires a different thread size. The arm supports microphones weighing up to 2 kg (4.4 lbs).
4. Kabel Rute: Open the magnetic cable covers along the arm. Lay your microphone cable inside the channels and close the covers to secure and conceal the cable.
5. Saluyukeun tegangan: Use the included Allen wrench to adjust the tension at the arm joints if needed. This allows you to fine-tune the swing and fall resistance to match your microphone's weight and your preferred movement.

Image: A complete desk setup featuring the Elgato Wave Mic Arm LP with a microphone, positioned below a monitor, demonstrating its low-profile integrasi.

5. Operating the Mic Arm

The Wave Mic Arm LP is designed for flexible and precise microphone positioning:

• Penyesuaian Horizontal: The arm can rotate 360 degrees at both the base and the elbow, allowing you to swing the microphone across your entire workspace.
• adjustment nangtung: The elbow joint allows for 90 degrees of upward rotation and 60 degrees of downward rotation, enabling you to adjust the microphone's height and angle relative to your mouth.
• Sudut mikropon: The ball head at the end of the arm provides precise control over your microphone's orientation. Loosen the collar, adjust the microphone to the desired angle, and then tighten the collar to secure it.
• Manajemén Kabel: Utilize the magnetic cable channels to keep your setup tidy. Ensure cables are not pinched or excessively bent when adjusting the arm.

Image: A user operating the Elgato Wave Mic Arm LP, adjusting the microphone position for optimal audio capture during a recording session.

6. Pangropéa

To ensure the longevity and optimal performance of your Elgato Wave Mic Arm LP:

• beberesih: Wipe the arm with a soft, dry cloth to remove dust and fingerprints. Avoid using abrasive cleaners or solvents.
• Tegangan gabungan: Periodically check the tension of the arm joints. If the arm feels too loose or too stiff, use the provided Allen wrench to adjust the screws until the desired resistance is achieved.
• Clamp Kaamanan: Pastikeun meja clamp remains securely fastened to your desk. Re-tighten if any looseness is detected.
• Pamariksaan kabel: Regularly inspect cables routed through the channels for any signs of wear or damage.

7. Cara ngungkulan

• Panangan teu nahan posisi:
  - Check the tension screws at each joint. Use the Allen wrench to tighten them until the arm holds its position firmly. Ensure the microphone weight does not exceed the maximum load of 2 kg (4.4 lbs).
• Méja Clamp Slips:
  - Ensure the desk clamp is fully tightened. Verify that the desk surface is clean and free of debris that might reduce grip. The clamp is designed for desks up to 60 mm (2.4 inches) thick.
• Microphone Does Not Fit:
  - Confirm your microphone's thread size. Use the appropriate 1/4" to 3/8" or 1/4" to 5/8" adapter included with the mic arm.
• Cables Are Not Secure in Channels:
  - Ensure the magnetic covers are properly aligned and fully closed over the cable channels. Avoid overfilling the channels with too many or too thick cables.

For further assistance, please refer to the official Elgato support resources.

8. Spésifikasi

9. Garansi jeung Rojongan

The Elgato Wave Mic Arm LP is covered by a manufacturer's warranty. For detailed warranty information, product registration, and technical support, please visit the official Elgato websitus atanapi ngahubungan layanan palanggan maranéhanana langsung.

Anjeun tiasa mendakan langkung seueur inpormasi sareng dukungan dina Toko Elgato di Amazon.