ALDI Ferrex Ash Vacuum Cleaner User Manual

Parentah Kasalametan penting

Baca sadaya pitunjuk kalayan saksama sateuacan nganggo alat ieu. Upami henteu nuturkeun pitunjuk ieu tiasa nyababkeun sengatan listrik, kahuruan, sareng/atanapi tatu parah.

• Entong vacuum hot ash or embers. Ensure all ash is completely cold before vacuuming. Wait at least 24 hours after the last fire.
• Entong vacuum flammable or combustible materials, liquids, or toxic substances.
• Always ensure the filter is correctly installed before operation.
• Cabut colokan alat tina stop kontak listrik sateuacan beberesih atanapi ngalakukeun perawatan naon waé.
• Jauhkeun barudak sareng piaraan tina alat salami operasi.
• Entong nganggo alat upami kabel listrik atanapi colokan rusak.
• Ulah neuleumkeun unit motor dina cai atawa cairan séjén.
• Paké ngan asesoris aslina tur suku cadang.

Produk Leuwihview jeung Komponén

Familiarize yourself with the parts of your ALDI Ferrex Ash Vacuum Cleaner before assembly and operation.

Figure 1: Main unit of the ALDI Ferrex Ash Vacuum Cleaner, showing the motor head, collection drum, flexible hose, and aluminum nozzle.

Figure 2: All included components: motor head, collection drum, flexible hose, aluminum nozzle, extension tubes, filter, and mesh filter basket.

Daptar komponén:

1. Motor Head (yellow unit with power switch)
2. Ash Collection Drum (black metal container)
3. Selang Nyeuseup fléksibel
4. Nozzle Aluminium
5. Extension Tubes (2 pieces)
6. Saringan HEPA
7. Metal Mesh Filter Basket
8. Locking Clips (to secure motor head to drum)
9. Kabel listrik

Setup sareng Majelis

Follow these steps to assemble your ash vacuum cleaner before first use.

1. Ngabongkar komponén: Carefully remove all parts from the packaging. Check for any damage.
2. Pasang Filter:
   

   Figure 3: The HEPA filter and its protective metal mesh basket.

   Place the HEPA filter onto the motor unit's filter housing. Ensure it is seated correctly and securely. Then, place the metal mesh filter basket over the HEPA filter, ensuring it covers the filter completely.
3. Attach Motor Head: Place the motor head onto the ash collection drum. Secure it firmly using the locking clips on both sides of the drum. Ensure the clips are fully engaged.
4. Sambungkeun selang: Insert the flexible suction hose into the inlet port on the side of the collection drum. Twist clockwise to secure it.
5. Attach Nozzle/Tubes: Connect the aluminum nozzle directly to the end of the flexible hose, or attach one or both extension tubes between the hose and the nozzle for extended reach.

Gambar 4: Top view showing the motor head, hose connection, and extension tubes ready for use.

Parentah Operasi

Before operating, ensure all safety instructions have been read and understood. Only vacuum cold ash.

1. Pariksa Suhu Lebu: Confirm that the ash to be vacuumed is completely cold. Hot ash can cause fire and damage the appliance.
2. Colokkeun: Selapkeun kabel listrik kana stop kontak listrik anu cocog.
3. Mimitian Vacuuming: Press the ON/OFF switch located on the motor head to turn on the vacuum cleaner.
4. Clean Ash: Guide the nozzle over the cold ash. The powerful suction will collect the ash into the drum.
5. Stop Operasi: Once cleaning is complete, press the ON/OFF switch again to turn off the appliance.
6. Cabut colokan: Pegatkeun sambungan kabel listrik ti stop kontak listrik.

Figure 5: The ash vacuum cleaner in operation, demonstrating its use for cleaning cold ash.

Pangropéa jeung beberesih

Pangropéa rutin mastikeun kinerja anu optimal sareng manjangkeun umur vacuum cleaner anjeun.

Emptying the Ash Collection Drum:

1. Pastikeun alatna dicabut colokan.
2. Unclip the locking clips and carefully lift the motor head from the collection drum.
3. Remove the filter and mesh basket.
4. Empty the cold ash from the drum into a suitable, non-combustible container.
5. Ngabersihan jero kendang kalayan iklanamp cloth if necessary. Ensure it is completely dry before reassembly.

Ngabersihan saringan:

• The HEPA filter should be cleaned regularly to maintain suction power.
• Gently tap the filter against a hard surface to dislodge accumulated ash.
• For a more thorough cleaning, the filter can be rinsed under cold running water. Ensure the filter is lengkep garing before re-installing it. Using a wet filter can damage the motor.
• Replace the filter if it is damaged or if suction power significantly decreases even after cleaning.

beberesih umum:

Ngusap bagian luar alat ku lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.

Pamérésan masalah

If you encounter issues with your ash vacuum cleaner, refer to the following table for common problems and solutions.

Lamun masalah persists sanggeus nyobian solusi ieu, mangga ngahubungan rojongan customer.

Spésifikasi teknis

• model: B0971QCNSP
• merek: Aldi Ferrex
• kakuatan: 1200 Watt
• ASIN: B0971QCNSP
• Tanggal munggaran sayogi: 1 Juli 2021

Garansi sarta Rojongan Palanggan

For warranty information, please refer to the documentation provided with your purchase or contact the retailer directly.

If you require technical assistance or have questions not covered in this manual, please contact ALDI customer support through their official channels.

Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.