1. Produk Langkungview
The SINOTIMER TM630S-2 is a versatile 7-day weekly digital programmable timer switch designed for automatic control of various electrical equipment. It features a high-accuracy CMOS chip, strong anti-jamming capabilities, and is simple to set up and operate. This timer is ideal for applications such as controlling streetlights, neon signs, water heaters, air conditioners, and agricultural facilities.
Gambar 1.1: Hareupeun view of the SINOTIMER TM630S-2 Digital Programmable Timer Switch, showing the LCD display and control buttons.
Fitur konci:
- 24 Hours / 7 Days Programmable: Allows for flexible scheduling throughout the week.
- Batré Diwangun-di: Retains memory settings during power failures.
- Auto Time Error Correction: Automatically corrects time by +/- 30 seconds weekly.
- Sababaraha Program: Supports up to 16 ON/OFF settings per day or week.
- Kontrol Manual: Ability to manually override programmed settings.
- Aplikasi lega: Suitable for controlling various electrical appliances and systems.
2. Instalasi jeung Wiring
penting: Installation should only be performed by a qualified electrician to ensure safety and proper functionality. Disconnect power before installation.
Pamasangan:
The TM630S-2 is designed for DIN-Rail mounting. Ensure a secure fit in your electrical panel or enclosure.
Diagram Wiring:
Refer to the diagram below for correct wiring connections. The timer has input terminals for power supply and output terminals for controlling the connected appliance.
Gambar 2.1: Wiring diagram and dimensions of the TM630S-2. Connect the power source to the 'INPUT' terminals (L for Live, N for Neutral) and the appliance to be controlled to the 'OUTPUT' terminals (L for Live, N for Neutral).
- Input kakuatan: Connect the main power supply (12VDC or 220VAC, depending on your model) to the terminals labeled "INPUT" (L and N).
- Appliance Output: Connect the electrical appliance you wish to control to the terminals labeled "OUTPUT" (L and N). The timer acts as a switch for the live (L) line.
- Sambungan Aman: Pastikeun sadaya sambungan kawat pageuh sareng aman pikeun nyegah kontak anu leupas sareng bahaya anu poténsial.
3. Parentah Operasi
Familiarize yourself with the buttons on the timer: Minggu, H+, M+, S+, Jam, Timer, C/Urang Sunda (Cancel/Recall), and Manual.
3.1. Initial Setup / Reset
Upon first use or after a prolonged power outage, the display may be blank. The built-in battery will maintain settings, but a full reset might be needed if the unit behaves unexpectedly.
- Reset lengkep: Press the recessed C button (usually located near the 'Week' button) with a pointed object (e.g., a pen tip) to clear all settings and reset the timer to factory defaults.
3.2. Nyetél Waktos Ayeuna
- Pencét jeung tahan tombol Jam kancing.
- Bari nyekelan Jam, pencét Minggu pikeun ngeset dinten ayeuna dina saminggu.
- Bari nyekelan Jam, pencét H+ pikeun ngeset jam ayeuna.
- Bari nyekelan Jam, pencét M+ pikeun nyetél menit ayeuna.
- Bari nyekelan Jam, pencét S+ to set the current second.
- Ngaleupaskeun Jam tombol pikeun ngahemat waktos.
3.3. Programming ON/OFF Events
The TM630S-2 supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.
- Pencét éta Timer tombol sakali. Layar bakal némbongkeun "1 ON".
- Pencét Minggu to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations like MO-FR, SA-SU, MO-SA, etc.).
- Pencét H+ to set the hour for the "1 ON" event.
- Pencét M+ to set the minute for the "1 ON" event.
- Pencét S+ to set the second for the "1 ON" event.
- Pencét éta Timer tombol deui. Layar bakal némbongkeun "1 OFF".
- Repeat steps 2-5 to set the day(s), hour, minute, and second for the "1 OFF" event.
- Terus pencét Timer button to cycle through "2 ON", "2 OFF", up to "16 ON", "16 OFF", setting each program as needed.
- To exit programming mode and save settings, press the Jam kancing.
Note: If you do not need all 16 programs, simply press Jam to exit after setting your desired programs.
3.4. Manual Override
The Manual button allows you to temporarily override the programmed settings.
- Pencét Manual repeatedly to cycle through different modes:
- ON: The output is continuously ON, ignoring programmed OFF times.
- OTOMATIS ON: The output is currently ON, and will follow programmed OFF times.
- Pareuman: The output is continuously OFF, ignoring programmed ON times.
- Otomatis Pareum: The output is currently OFF, and will follow programmed ON times.
- Select "AUTO ON" or "AUTO OFF" to return to automatic operation based on your programmed schedule.
3.5. Cancel/Recall Program
The C/Urang Sunda button is used to cancel or recall a specific program.
- While in programming mode (after pressing Timer), navigate to the specific program you wish to cancel.
- Pencét C/Urang Sunda to cancel the current ON/OFF setting. The display will show "--:--".
- Pencét C/Urang Sunda again to recall the setting.
4. Pangropéa
The SINOTIMER TM630S-2 is designed for low maintenance. Follow these guidelines to ensure its longevity:
- beberesih: Use a soft, dry cloth to clean the exterior of the timer. Do not use abrasive cleaners or solvents.
- Lingkungan: Ensure the timer is installed in a dry environment, away from direct sunlight, extreme temperatures, and excessive dust or moisture.
- Batré internal: The timer has a built-in rechargeable battery to maintain settings during power outages. This battery is not user-replaceable.
5. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Paparanana kosong. | No power supply; internal battery fully discharged. | Check power connections. Allow unit to charge for a few minutes after connecting to power. Perform a full reset if necessary. |
| Timer not switching ON/OFF as programmed. | Incorrect program settings; manual override active; incorrect current time. | Verify program settings (ON/OFF times, days). Check the manual override mode (ensure it's in "AUTO ON" or "AUTO OFF"). Re-set the current time. |
| Time display is inaccurate. | Initial time not set correctly. | Re-set the current time accurately. The timer has auto-correction, but initial setting is crucial. |
| Tombol-tombol henteu ngaréspon. | glitch software samentara. | Perform a full reset using the recessed 'C' button. If the issue persists, contact customer support. |
6. Spésifikasi Téknis
| merek | SINOTIMER |
| Modél | TM630S-2 |
| Warna | Bodas |
| Rentang Suhu | -20°C nepi ka +50°C |
| Sasayogian tanaga | 12VDC / 220VAC (optional, specific to purchased model) |
| Konsumsi Daya | 4.5 VA (MAX) |
| tampilan | LCD |
| Ngalihkeun Kontak | 1 saklar changeover |
| Program | 16 ON/OFF settings each day or week |
| Histeresis | 2 sec/day (at 25°C) |
| Interval Minimum | 1 detik |
| Kapasitas | 30A 250V AC |
| Black-out Memory | 60 dinten |
| Jangkauan Timer | 1 detik nepi ka 168 jam |
| Ngecas Batré | 3V |
| Average Error | 1s/24h (at 25°C) |
ukuran:
Refer to Figure 2.1 in the Installation section for detailed dimensions (e.g., 95mm height, 98mm overall height, 24mm width per module, 36.5mm DIN-Rail mounted).
7. Eusi Paket
The package for the SINOTIMER TM630S-2 Digital Programmable Timer Switch typically includes:
- 1 x SINOTIMER TM630S-2 Timer Switch
Note: Additional accessories or documentation may vary by retailer or region.
8. Pangrojong sareng Jaminan
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.
While the provided product information did not specify a detailed warranty period, standard consumer electronics typically come with a limited warranty against manufacturing defects. Please consult the product packaging or your point of purchase for specific warranty terms and conditions.
