Buku Panduan Pangukir Laser Ortur Laser Master 2 LU1-4

1. Bubuka

The Ortur Laser Master 2 LU1-4 is a versatile CNC laser engraving and cutting machine designed for precision work on various materials. Equipped with a 32-bit motherboard, it offers enhanced speed and accuracy for both hobbyists and professionals. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device.

2. Émbaran Kasalametan

Operating a laser engraver requires strict adherence to safety protocols to prevent injury and damage. Always prioritize safety.

• Perlindungan panon: Always wear appropriate laser safety goggles when the laser is active. While the device features an eye-protection design, direct viewing of the laser beam should be avoided.
• Unauthorized Movement Detection: The main board includes a G-sensor. If the machine detects unauthorized movement during operation, the laser beam will automatically stop to prevent accidents.
• Connection Interruption Safety: In the event of a computer system stop or USB cable disconnection, which causes the laser engraver to cease movement, the laser beam will automatically stop to mitigate fire risks.
• Motor Stop Safety: If the laser engraver is under control but the user forgets to operate it, and the motor stops moving while the laser beam remains active, an additional safety mechanism will cut off the laser to prevent fire.
• Ventilasi: Pastikeun ventilasi anu cekap di rohangan damel anjeun pikeun miceun haseup sareng haseup anu dihasilkeun nalika ngukir sareng motong.
• Bahan anu gampang kaduruk: Exercise extreme caution when working with flammable materials. Never leave the machine unattended during operation.

3. Produk Langkungview

3.1 Fitur konci

• Advanced Motherboard: Equipped with a 32-bit motherboard and 32Bits MCU, capable of preprocessing 32 instructions for smoother and faster operation.
• Gancang: Supports up to 921600 baud rate and engraving speeds of up to 3000mm/min.
• Area ukiran: Generous carving area of X: 390MM x Y: 410MM.
• LU1-4 Laser Module: Features an electric power of 20W and a laser power of 5.5W, with a wavelength of 445 ± 5nm. It has a fixed focus with a default focal length of 29MM.
• Kasaluyuan lega: Compatible with various engraving software including LaserGRBL (Windows) and LightBurn (Windows, Mac, Linux).
• Dirojong File Bentuk: Accepts NC, BMP, JPG, PNG, DXF, and other common file format.

3.2 Komponén

The Ortur Laser Master 2 LU1-4 comes with the main engraving unit and essential accessories for operation.

The image displays the Ortur Laser Master 2 LU1-4 laser engraver unit, along with essential accessories such as safety goggles, wrenches, material samples, cable ties, and a cleaning brush.

This image shows the Ortur Laser Master 2 LU1-4 laser engraver with its dimensions (500mm width, 570mm depth) and icons highlighting key features: 32-bit motherboard, 3 safety protections, 390x410 engraving area, longer service life, safe circuit system, and faster engraving speed.

A nutup-up view of the LU1-4 laser module, detailing its specifications: 450±5nm wavelength, focused beam, Max Input of Laser Diode: 4.5V, 3.5A, Max Input of Laser Module: 12V, 3A, and Maximum Luminous Power: 5500mW. It also notes compliance with IEC 60825-1:2014.

This image shows the specialized 32-bit motherboard of the Ortur Laser Master 2, designed for smoother and faster carving operations, capable of pre-processing 32 instructions.

4. Setélan

Follow these general steps to set up your Ortur Laser Master 2 LU1-4:

1. Ngabongkar komponén: Cabut sadaya komponén tina bungkusna kalayan ati-ati teras pariksa kana daptar bungkusna.
2. Kumpulkeun pigura: Follow the assembly instructions provided in the separate assembly guide to construct the machine frame.
3. Pasang modul laser: Securely attach the LU1-4 laser module to the gantry according to the assembly instructions.
4. Sambungkeun Kakuatan: Connect the provided 12V 3A power adapter to the machine and a suitable power outlet.
5. Nyambung ka Komputer: Use a USB cable to connect the engraver to your computer.
6. Pasang Parangkat Lunak: Download and install compatible engraving software such as LaserGRBL or LightBurn. Software can be downloaded from ortur.tech/olm2/.
7. Kalibrasi awal: Perform initial calibration and focus adjustments as guided by the software and specific laser module instructions.

5. Parentah Operasi

5.1 Kasaluyuan Software

The Ortur Laser Master 2 is compatible with:

• LaserGRBL: For Windows operating systems.
• Light Burn: For Windows, Mac OS, and Linux operating systems.

5.2 Dirojong File Formulir

The machine supports various input formats including NC, BMP, JPG, PNG, and DXF.

5.3 Prosés Ukiran

Once the machine is set up and software is installed, follow these steps for engraving or cutting:

1. Nyiapkeun Bahan: Select your desired material (e.g., wood, metal, stone, glass) and ensure it is clean and properly secured.
2. Bahan Tempat: Position the material within the 390x410mm carving area on the machine bed.
3. Load Design: Open your chosen design file in the engraving software.
4. Saluyukeun Setélan: Configure laser settings such as power, speed, and number of passes based on the material and desired effect.
5. Mimitian Operasi: Start the engraving or cutting process from the software.
6. Monitor: Continuously monitor the operation. Ensure safety goggles are worn or the eye protection design is effectively utilized.

The image illustrates the 'New Eye Protection Design' feature of the Ortur Laser Master 2, allowing users to observe laser engraving without requiring additional safety goggles, though wearing them is always recommended for direct viewing.

This image showcases various materials successfully engraved by the Ortur Laser Master 2, including wood, glass, food, stone, plated metal, stainless steel, ceramic tile, phone cases, paper, acrylic, plywood, and thin leather. It highlights the versatility of the LU1-3, LU1-4, and LU2-4 laser modules, noting that the LU1-2 is suitable for detailed photos on paper and wood but not for cutting or engraving non-flammable materials.

6. Pangropéa

Regular maintenance ensures optimal performance and longevity of your laser engraver:

• Lensa Laser Bersih: Periodically clean the laser lens with a suitable lens cleaning solution and cloth to maintain engraving quality.
• Clean Machine Frame: Keep the machine frame, rails, and moving parts free from dust and debris.
• Pariksa sambungan: Regularly inspect all electrical and USB connections for secure fit.
• Pastikeun ventilasi: Maintain clear airflow around the machine to prevent overheating and ensure efficient smoke extraction.

7. Cara ngungkulan

Refer to this section for common issues and their potential solutions:

• Laser Teu Tembak:
  • Check if the machine is powered on and all cables are securely connected.
  • Verify laser power settings in the software.
  • Ensure the laser module is properly seated.
• Kualitas ukiran goréng:
  • Adjust the laser focus. The LU1-4 has a fixed focus, ensure material height is correct.
  • Bersihkeun lénsa laser.
  • Experiment with different speed and power settings for the material.
• Machine Not Connecting to Computer:
  • Pastikeun kabel USB tiasa dianggo sareng nyambung kalayan aman.
  • Check if the necessary drivers are installed on your computer.
  • Balikan deui duanana mesin sareng komputer.
• Mesin Eureun Teu Disangka-sangka:
  • Review the safety features mentioned in Section 2. An unexpected movement or connection loss can trigger a safety stop.
  • Check for any obstructions in the machine's movement path.

8. Spésifikasi Téknis

9. Garansi jeung Rojongan

Ortur is committed to providing comprehensive pre-sales and after-sales services for its customers.

For pre-sale consultations or general inquiries, please contact us via email: support_ortur@163.com.

For technical support and troubleshooting assistance, please visit our dedicated support portal: ortur.tech/support. Additional product information and resources can be found at: ortur.tech/olm2.