UNI-T UT161B Digital Smart Multimeter Instruction Manual

1. Bubuka jeung Leuwihview

The UNI-T UT161B is a stable and highly reliable handheld True RMS digital multimeter designed for professional use. It is capable of measuring a wide range of electrical parameters, including AC/DC voltage (up to 1000V), AC/DC current (up to 10A), resistance, capacitance, frequency, duty cycle, and performing diode and continuity tests. This device features a professional Non-Contact Voltage (NCV) measurement function for quickly distinguishing between neutral and live wires, enhancing user safety. It also includes sound and light prompts, high-temperature sound and light alarms for high current measurements, and an automatic sensing USB communication module for intuitive data acquisition. The multimeter is equipped with a backlight function for continuous use in low-light conditions and features a durable dual-color casing.

2. Fitur Produk

• Pangukuran True RMS: Nyayogikeun bacaan anu akurat pikeun bentuk gelombang non-sinusoidal.
• Jumlah tampilan: 6000 counts for precise measurements.
• Voltage Pangukuran: AC/DC voltage nepi ka 1000V.
• Pangukuran ayeuna: Arus AC/DC nepi ka 10A.
• Pangukuran Kapasitansi: Large capacitance measurement capability.
• Ukur résistansi: Large resistance measurement capability.
• Uji dioda/kontinuitas: For checking circuit integrity.
• NCV (Non-Kontak Voltage): Audible and visual alarm for live wire detection.
• Data Hold/Backlight: For convenient reading and operation in various environments.
• MAX/MIN/Relative Mode: For advanced measurement analysis.
• Komunikasi USB: For connecting to a PC and data logging.
• Perlindungan Input: Enhanced safety features.
• Peringkat Kasalametan: CAT III 1000V / CAT IV 600V.

3. Setup and What's in the Box

Before operating the UNI-T UT161B Digital Smart Multimeter, ensure all components are present and in good condition. The standard package includes:

• 1 x UNI-T UT161B Multimeter
• 1 x Sapasang Test Leads
• 1 x Kabel USB
• 1 x Manual Kertas (Basa Inggris)
• 1 x Kotak bungkusan
• 1 x Tools Bag

Image: Contents of the UNI-T UT161B package, including the multimeter, test leads, USB cable, manual, and carrying bag.

4. Spésifikasi

5. Émbaran Kasalametan

Always adhere to safety precautions when using the multimeter to prevent electric shock or personal injury. This device is rated CAT III 1000V and CAT IV 600V. Ensure test leads are in good condition and properly connected. Do not attempt to measure voltages or currents exceeding the specified maximum limits. Always turn off power to the circuit before connecting or disconnecting test leads for resistance, capacitance, or diode tests. Use the NCV function as an initial check for live wires, but always verify with direct contact measurement when possible. Replace fuses with specified types and ratings only.

6. Parentah Operasi

The UNI-T UT161B features a rotary dial for function selection and several buttons for additional settings and features. Refer to the detailed illustrations below for component identification.

Gambar: Hareupeun view of the UNI-T UT161B Digital Multimeter, highlighting the display, rotary dial, and function buttons.

Image: Close-up of the rotary dial and input jacks on the UNI-T UT161B, showing measurement selections and lead connections.

6.1. Pangukuran Dasar

1. Voltage (AC/DC): Rotate the dial to V~ (AC Voltage) atanapi V- (DC Voltage). Connect the test leads to the circuit in parallel. The display will show the voltage maca.
2. Ayeuna (AC/DC): Rotate the dial to A~ (AC Current) or A- (DC Current). Ensure the circuit is de-energized. Connect the test leads in series with the circuit. Re-energize the circuit and read the current. For small currents, use mA or μA ranges.
3. Résistansi (Ω): Rotate the dial to Ω. Connect the test leads across the component to be measured. Ensure the component is isolated from the circuit.
4. Kapasitansi (F): Rotate the dial to F. Connect the test leads across the capacitor. Ensure the capacitor is discharged before measurement.
5. Frékuénsi (Hz)/Daur Kawajiban (%): These functions are often integrated with voltage or current measurements. Select the appropriate range and press the Hz/% button to toggle between frequency and duty cycle.
6. Tés Diode: Rotate the dial to the diode symbol. Connect the red lead to the anode and the black lead to the cathode. A forward voltage drop bakal dipidangkeun. Balikkeun kabel pikeun mariksa sirkuit kabuka.
7. Uji kontinuitas: Rotate the dial to the continuity symbol. Touch the test leads to the points to be tested. A buzzer will sound if continuity exists (low resistance).

6.2. NCV (Non-Kontak Voltage) Fungsi

Fungsi NCV ngamungkinkeun pikeun ngadeteksi voltase ACtage without direct contact. Rotate the dial to NCV. Bring the top of the multimeter near the conductor. The device will provide audible beeps and a flashing light indication when AC voltage is detected, with the frequency of beeps and flashes increasing with stronger signals.

6.3. USB Komunikasi

The UT161B supports USB communication for data logging and analysis on a computer. Connect the provided USB cable to the multimeter's USB interface (located on the back, often under the kickstand) and to your computer. Install the necessary PC software (typically provided on a CD or available for download from the UNI-T websitus) ka view and record measurement data.

Gambar: Balik view of the UNI-T UT161B, illustrating the kickstand and the location of the USB port for PC connection.

7. Pangropéa

7.1. beberesih

Ngusap kasus kalayan iklanamp lawon sareng deterjen hampang. Entong nganggo bahan abrasif atanapi pangleyur. Pastikeun alatna garing pisan sateuacan dianggo.

7.2. Ngagantian batré

When the battery indicator appears on the display, replace the batteries. Turn off the multimeter and disconnect all test leads. Open the battery compartment cover on the back of the device, replace the old batteries with new ones of the specified type, and securely close the cover.

7.3. Ngagantian sekering

The UT161B+ utilizes double ceramic (explosion-proof) fuse tubes for protection. If a fuse blows, turn off the multimeter and disconnect all test leads. Open the casing (refer to the full manual for specific instructions) and replace the blown fuse with a new one of the exact same type and rating to maintain safety and performance.

8. Cara ngungkulan

• Teu Aya Layar/Nyala: Pariksa tingkat batré sareng pastikeun parantos dipasang kalayan leres.
• Bacaan anu salah: Verify test lead connections, ensure the correct function is selected on the rotary dial, and check for blown fuses in current measurement modes.
• NCV Teu Kadeteksi: Ensure the NCV function is selected and the multimeter is brought close enough to the AC voltage sumber.
• USB Communication Issues: Confirm the USB cable is securely connected to both the multimeter and the computer. Ensure the correct driver and software are installed on the PC.

9. Garansi jeung Rojongan

For detailed warranty information, technical support, and service inquiries, please refer to the official UNI-T websitus atanapi ngahubungan dealer otorisasi Anjeun. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.