Marantec Digital 572 Handheld Transmitter 868 MHz Instruction Manual

1. Bubuka

This instruction manual provides essential information for the proper setup, operation, and maintenance of your Marantec Digital 572 Handheld Transmitter. This 2-channel wireless remote control operates at 868 MHz and is designed for use with Marantec garage door operators and compatible systems. Please read this manual thoroughly before using the device to ensure safe and efficient operation.

2. Parentah Kasalametan

• Keep the handheld transmitter out of reach of children to prevent accidental operation of garage doors or gates.
• Do not operate the garage door or gate if there are people, animals, or objects in the path of movement.
• Ensure the garage door or gate is visible during operation to prevent accidents.
• Ulah ngalaan alat ka suhu ekstrim, Uap, atawa sinar panonpoé langsung.
• Only use the specified battery type (Lithium Manganese Dioxide) for replacement.
• Buang batré anu dipaké nurutkeun peraturan lokal.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• Marantec Digital 572 Handheld Transmitter
• Kurung témbok
• Dowels and screw for wall bracket installation
• Manual instruksi (dokumen ieu)
• Pre-installed Lithium Manganese Dioxide battery

4. Produk Langkungview

The Marantec Digital 572 is a compact, 2-channel handheld transmitter featuring Marantec's bi·linked radio system for enhanced security. It includes two distinct buttons for controlling different functions or operators.

Gambar 4.1: Hareupeun view of the Marantec Digital 572 Handheld Transmitter, showing the two control buttons and the Marantec logo.

Gambar 4.2: Angled view of the Marantec Digital 572, highlighting its compact design and the red LED indicator.

Gambar 4.3: Samping view of the Marantec Digital 572, illustrating its slim profile.

The transmitter features a small red LED indicator, which illuminates during transmission to confirm button presses and indicate battery status.

5. Setelan sareng Pemrograman

The Marantec Digital 572 Handheld Transmitter must be programmed to your Marantec garage door operator or compatible bi·linked receiver before use. The exact programming procedure may vary slightly depending on your specific operator model. Refer to your garage door operator's instruction manual for detailed programming steps. Generally, the process involves activating a programming mode on your receiver and then transmitting a signal from the handheld transmitter.

General Programming Steps (Consult your operator's manual for specifics):

1. Access Receiver Programming Mode: Locate the programming button or menu on your Marantec garage door operator or external bi·linked receiver. Press and hold this button until the programming indicator (usually an LED) illuminates or flashes.
2. Transmit Signal from Handheld Transmitter: While the receiver is in programming mode, press and hold the desired button on your Digital 572 handheld transmitter. The LED on the transmitter will illuminate.
3. Konfirmasi pasangan: Release the button on the handheld transmitter once the receiver's indicator confirms successful pairing (e.g., LED stops flashing, changes color, or the operator briefly moves).
4. Operasi tés: After programming, test the handheld transmitter by pressing the programmed button to ensure it controls the garage door or gate correctly.

Catetan: The bi·linked radio system uses a rolling code and 128-bit encryption for security. Each button press generates a new code, making unauthorized copying extremely difficult.

6. Parentah Operasi

Once programmed, operating the Marantec Digital 572 is straightforward:

• Single Function Control: Press and release the programmed button to activate the associated function (e.g., open/close garage door). The red LED on the transmitter will briefly illuminate.
• Multiple Function Control: If you have programmed different buttons to control separate operators or functions, press the respective button for the desired action.
• rentang: The effective range of the transmitter can be affected by environmental factors, such as obstacles, weather conditions, and interference from other radio devices.

Gambar 6.1: The compact Marantec Digital 572 fits conveniently in a pocket or on a keychain.

7. Pangropéa

Ngagantian batré

The Marantec Digital 572 uses a Lithium Manganese Dioxide battery. When the red LED on the transmitter becomes dim or fails to illuminate during button presses, it indicates a low battery and requires replacement.

1. Taliti muka pamancar casing. Refer to the diagram in your operator's manual or look for a small notch to pry open the case.
2. Remove the old battery, noting its orientation.
3. Insert a new Lithium Manganese Dioxide battery, ensuring correct polarity.
4. Tutup casing aman.
5. Test the transmitter to confirm functionality.

beberesih: Clean the exterior of the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.

8. Cara ngungkulan

9. Spésifikasi

• model: Digital 572
• Nomer Bagian: 101115
• merek: Marantec
• Frékuénsi: 868 MHz (bi·linked radio system)
• Saluran: 2
• Kaamanan: 128-bit encryption, rolling code
• ukuran: 60 x 39 x 12 mm
• beurat: 30 g
• Bahan: palastik
• warna: Bodas
• Jenis Batré: Lithium Manganese Dioxide (included)
• Komponén Kaasup: Hand-held transmitter, wall bracket, dowels and screw, instruction manual
• Asal: Dijieun di Jerman

Catetan: Spésifikasi tiasa robih tanpa aya bewara sateuacana.

10. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries, please contact Marantec customer service or your authorized Marantec dealer. Keep your proof of purchase for warranty claims.

You can typically find contact information on the official Marantec websitus atanapi dina bahan bungkusan.