Simrad IP CAM-1 Marine Camera User Manual

1. Bubuka

The Simrad IP CAM-1 is a robust marine camera designed to enhance vessel awareness and safety. This camera provides clear visual monitoring of areas onboard or in close proximity to your boat. Its durable construction and advanced features make it suitable for demanding marine environments.

This manual provides essential information for the proper installation, operation, and maintenance of your IP CAM-1 camera. Please read it thoroughly before using the product.

2. Fitur Produk

Rugged 316 Stainless Steel Construction: Engineered to withstand harsh saltwater environments, ensuring longevity and reliability.
Pencitraan Resolusi Tinggi: Delivers clear visuals with a 1920 x 1080 resolution.
Kamampuh Visi Peuting: Equipped with high-performance IR LEDs for operation in low-light conditions or complete darkness, offering a 10-meter range.
Lensa Sudut Lebar: Features a 1.8mm wide-angle lens to provide a broad field of view.
Pilihan Daya Fleksibel: Supports Power Over Ethernet (POE) for simplified wiring or a standard 12V power supply.
Integrasi Seamless: Preconfigured for compatible Simrad NSSevo3/3S, NSOevo3/3S, Lowrance HDS LIVE, B&G Zeus 3, and Zeus 3S chartplotters/fish finders.

3. Émbaran Kasalametan

Punten perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan produk:

Ensure all power connections are made correctly and securely to avoid electrical hazards.
Do not attempt to open or modify the camera housing, as this may compromise its waterproof integrity and void the warranty.
Mount the camera in a location where it will not obstruct navigation or create a tripping hazard.
Pegatkeun sambungan kakuatan sateuacan ngalakukeun pangropéa atanapi beberesih.
Consult a qualified marine electronics technician for complex installations or repairs.

4. Eusi Paket

Saatos muka bungkusan, pariksa yén sadaya komponén aya sareng henteu ruksak:

Simrad IP CAM-1 Marine Camera
Mounting Hardware (screws, gaskets, etc. - typical for marine cameras)
Citakan Instalasi (upami aya)
Dokuméntasi (manual pamaké ieu)

Note: Specific cable lengths and types may vary. Ensure you have appropriate Ethernet (for POE) or 12V power cables for your installation.

5. Setup jeung Instalasi

The IP CAM-1 is designed for straightforward installation. Follow these steps for optimal performance:

Pilih Lokasi Pasang: Select a position that provides the desired field of view. The camera can be mounted rear-facing for use as a reverse camera or forward-facing for a view ahead of your vessel. Ensure the location is clear of obstructions and allows for proper cable routing.
Pasang kaméra: Secure the camera using the provided mounting hardware. Ensure a watertight seal if mounting in an exposed area. The 316 stainless steel housing is designed for direct exposure to marine elements.
Sambungan Daya:
- Power Over Ethernet (POE): If using POE, connect a compatible Ethernet cable from a POE-enabled network switch or injector directly to the camera's Ethernet port. This single cable will provide both power and data.
- Catu daya 12V: If not using POE, connect the camera to a stable 12V DC power source. Ensure correct polarity (positive to positive, negative to negative) to prevent damage.
Sambungan jaringan: Connect the camera to your vessel's network via an Ethernet cable. The camera is preconfigured for direct integration with compatible Simrad, Lowrance, and B&G chartplotters.
Initial Configuration (IP Address): After connecting, you may need to manually enter the camera's IP address on each compatible multifunction display (MFD) where you wish to view the camera feed. Refer to your MFD's user manual for specific instructions on adding IP cameras.

Simrad IP CAM-1 Marine Camera, front view showing the lens and stainless steel housing.

Figure 5.1: The compact, spherical design of the Simrad IP CAM-1 Marine Camera, highlighting its durable 316 stainless steel housing and the wide-angle lens. The camera is designed for marine environments.

6. Operasi

Once installed and configured, the IP CAM-1 camera feed can be accessed through your compatible chartplotter or fish finder.

Accessing Camera Feed: Navigate to the camera input section on your Simrad, Lowrance, or B&G multifunction display. The camera feed should appear as an available source.
Sababaraha kaméra: If multiple IP CAM-1 cameras are installed on your network, you can typically cycle through their views directly from your MFD.
Visi Peuting: The camera automatically activates its IR LEDs in low-light conditions, providing clear black-and-white video up to 10 meters.

7. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your IP CAM-1 camera.

Ngabersihan lensa: Gently clean the camera lens with a soft, damp cloth to remove salt spray, dirt, or debris. Avoid abrasive cleaners or materials that could scratch the lens.
Inspeksi Perumahan: Periodically inspect the 316 stainless steel housing for any signs of corrosion or damage. While highly resistant, extreme conditions may require attention.
Sambungan kabel: Check all cable connections for tightness and signs of wear or corrosion. Ensure waterproof seals are intact.

8. Cara ngungkulan

If you encounter issues with your IP CAM-1 camera, refer to the following common problems and solutions:

Masalah	Mungkin Cukang lantaranana	Solusi
No camera feed on MFD	Teu aya daya pikeun kaméra Loose network cable Incorrect IP address configuration Incompatible MFD model	Check power supply (POE or 12V). Ensure Ethernet cable is securely connected. Verify IP address settings on your MFD. Note: This camera is not compatible with Lowrance HDS Gen 3 units.
Kualitas gambar henteu saé	Lénsa kotor Insufficient lighting (if IR not active) Gangguan jaringan	Ngabersihan lénsa kaméra. Ensure IR LEDs are functioning in dark conditions. Check network cabling and connections for integrity.
Camera not recognized by network	Masalah konfigurasi jaringan Kabel Ethernet lepat	Verify network settings on your MFD and network switch. Uji nganggo kabel Ethernet anu béda.

9. Spésifikasi Téknis

model: IP CAM-1
Resolusi: 1920 x 1080
Lensa: 1.8mm wide-angle
Visi Peuting: High-performance IR LEDs (10m range)
Bahan Konstruksi: 316 stainless steel
Pilihan Daya: Power Over Ethernet (POE) or 12V DC
Kasaluyuan: Simrad NSSevo3/3S, NSOevo3/3S, Lowrance HDS LIVE, B&G Zeus 3, Zeus 3S (Not compatible with Lowrance HDS Gen 3)
Beurat barang: Kira-kira 2 pon (0.91 kg)
Ukuran Paket: Kira-kira 8 x 6 x 6 inci (20.3 x 15.2 x 15.2 cm)
Pabrikan: Simrad

10. Garansi jeung Rojongan

For warranty information and technical support, please refer to the official Simrad website or contact your authorized Simrad dealer. Keep your proof of purchase for warranty claims.

Sumberdaya Online: For the latest product information, software updates, and additional support resources, visit the Simrad Store or the official Simrad websitus.

	Simrad NSX Gancang Mimitian Guide: Setup, Fitur, sarta Operasi Mimitian kalayan tampilan multi-fungsi Simrad NSX anjeun. Pituduh ieu nyertakeun setelan awal, menu aksés gancang, aplikasi, panggeuing, setélan sistem, sareng seueur deui pikeun navigasi laut anu éfisién.
	Simrad TP10, TP22, TP32 Tillerpilot User Guide Detailed user guide for Simrad TP10, TP22, and TP32 Tillerpilots, covering installation, operation, advanced features, and troubleshooting for marine autopilot systems.
	Simrad S2009-S2016 Fish Finder: Manuale di Istruzioni Ufficiali Guide lengkep funzionamento, configurazione, installazione and manutenzione dei sistem Simrad S2009 jeung S2016 Fish Finder. Scopri le funzionalità avanzate sareng spésifik téknik pikeun pesca sareng navigasi maritim.
	Simrad I3007 Guide Instalasi Dokumén ieu nyayogikeun pituduh pamasangan pikeun Simrad I3007, ngajéntrékeun spésifikasi téknis, inpormasi konektor, grounding, sareng sistem ex.amples.
	Simrad NSS evo3S Operator Manual - Comprehensive Marine Navigation Guide Explore the Simrad NSS evo3S Operator Manual for detailed insights into marine navigation, chartplotting, sonar, radar, autopilot, and system customization. Essential guide for boaters.
	Simrad GO XSE Installation Manual Comprehensive installation manual for the Simrad GO XSE series multifunction displays, covering setup, wiring, software configuration, and specifications for marine navigation and sonar systems.

Simrad IP CAM-1