Tilu 988000

Thule Bike Protector Instruction Manual

Modél: 988000

Produk Leuwihview

The Thule Bike Protector is an accessory designed to provide additional protection for bicycles when they are transported or stored in close proximity, such as on a bike rack. It prevents direct contact between bike frames and components, minimizing the risk of dents and scratches.

Fitur konci:

  • Fit serbaguna: Designed to accommodate various bike frame geometries.
  • Pangaturan Gampang: Features an adjustable design with no loose parts, simplifying installation and removal.
  • Contact Prevention: Utilizes a rubber spacer to create separation between potential contact points.
  • Secure Fixation: Includes a sturdy strap to secure bikes together, further preventing movement and contact.
  • Pamakéan multi-tujuan: Suitable for transportation, parking, and storage scenarios.

Parentah Setup

Follow these steps to properly install the Thule Bike Protector to ensure maximum protection for your bicycles.

  1. Identify Contact Points: Before placing bikes on a rack or in storage, identify areas where bike frames, handlebars, pedals, or other components might come into contact with each other.
  2. Position the Protector: Place the rubber spacer component of the Thule Bike Protector between the identified contact points. Ensure the spacer is firmly seated to create a buffer.
  3. Secure with Strap: Wrap the integrated sturdy strap around the bike frames or components that need to be held together. Pull the strap taut and secure it to prevent movement. The strap should be tight enough to hold the bikes firmly but not so tight as to damage components.
  4. Pariksa panempatan: Once installed, gently shake the bikes to confirm that the protector is effectively separating them and that the strap is holding them securely. Adjust as necessary.
Two Thule Bike Protectors, showing the rubber spacer and integrated strap.

Image: Two Thule Bike Protectors, illustrating the design with a rubber spacer and securing strap.

Thule Bike Protector installed between two bikes on a car rack, preventing frame contact.

Gambar: Deukeut view of the Thule Bike Protector in use, separating two bicycles on a car-mounted rack.

Thule Bike Protector in use on a car rack, showing bikes secured and separated.

Image: Wider view of bikes secured with the Thule Bike Protector on a car rack, demonstrating effective separation.

Parentah Operasi

The Thule Bike Protector is designed for continuous use during bike transportation, parking, and storage to prevent damage.

  • During Transport: Ensure the protector is securely fastened before starting any journey. Periodically check its position and tightness during long trips.
  • Parking and Storage: Use the protector when bikes are parked closely together or stored in a garage or shed to prevent accidental contact and damage.
  • Ngahapus: To remove, unfasten the strap and carefully detach the rubber spacer from between the bikes.

Pangropéa

Proper maintenance ensures the longevity and effectiveness of your Thule Bike Protector.

  • beberesih: Clean the protector with mild soap and water. Rinse thoroughly and allow it to air dry completely before storage. Avoid harsh chemicals or abrasive cleaners.
  • Pamariksaan: Regularly inspect the rubber spacer for any signs of wear, tears, or damage. Check the strap for fraying or loss of elasticity. Replace the protector if significant wear is observed to maintain optimal protection.
  • Panyimpenan: Store the protector in a cool, dry place away from direct sunlight when not in use.

Pamérésan masalah

If you encounter issues with your Thule Bike Protector, refer to the following common solutions.

MasalahMungkin Cukang lantarananaSolusi
Bikes still touching despite protector.Incorrect placement of the protector or insufficient strap tightness.Reposition the rubber spacer to the exact contact point. Ensure the strap is pulled taut and securely fastened to minimize bike movement. Consider using additional protectors if multiple contact points exist.
Protector slips out of position.Strap is not tight enough or protector is not properly seated.Tighten the strap firmly. Ensure the rubber spacer is wedged securely between the bike components. The design allows for a snug fit on various frame shapes.
Strap appears worn or damaged.Normal wear and tear or excessive force during tightening.Discontinue use if the strap is compromised. Contact Thule customer support for replacement options or consider purchasing a new unit to ensure reliable protection.

Spésifikasi produk

Ngaran modélBike Protector
Nomer Bagian988000
merekThule
Bahanpalastik
Item Ukuran (L x W x H)3.9 x 7 x 15 inci
Item Beurat4.59 ons
Ukuran Paket (L x W x H)7.17 x 6.5 x 3.35 inci
Beurat pakét0.29 kg
Jumlah Item1
Disarankeun PamakéUnisex-sawawa
Model Taun2021

Émbaran jaminan

The Thule Bike Protector is covered by a Kawates Jaminan Hirupna. This warranty covers defects in materials and workmanship. For specific terms, conditions, and to make a warranty claim, please refer to the official Thule websitus atanapi hubungi dukungan palanggan Thule sacara langsung.

Rojongan Palanggan

For further assistance, questions, or to report any issues not covered in this manual, please contact Thule customer support:

  • Websitus: Nganjang ka Thule resmi websitus pikeun FAQs, pendaptaran produk, sarta informasi kontak.
  • Formulir Kontak: Utilize the online contact form available on the Thule support page.
  • Telepon: Refer to the Thule websitus pikeun nomer telepon layanan palanggan régional.

When contacting support, please have your product model (988000) and purchase details available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.