SINOTIMER TM616 Weekly Programmable Timer

1. Bubuka

The SINOTIMER TM616 is a weekly programmable digital timer switch designed for controlling electrical equipment. It allows users to set specific ON/OFF times over a 24-hour or 7-day period, making it suitable for various household and industrial applications. This device features a built-in battery to retain programmed settings during power outages and offers manual override capabilities.

This manual provides detailed instructions for the installation, operation, and maintenance of your TM616 timer.

2. Fitur Produk

• Weekly programmable with up to 17 ON/OFF settings per day or week.
• High capacity: 30 Amps (6500 Watts) at 250V AC.
• Lega voltage compatibility: AC 110V, 220V, or DC 12V (model dependent).
• Minimum interval setting: 1 minute.
• Built-in 1.2V 40mA rechargeable battery for memory backup (up to 60 days during power failure).
• Automatic time error correction: ±30 seconds per week.
• Manual ON/OFF control option.
• Din Rail mountable for easy installation in DB boards.

3. Émbaran Kasalametan

WARNING: Risk of Electric Shock. Installation should only be performed by a qualified electrician.

• Always disconnect power at the circuit breaker or fuse box before installing or servicing the timer.
• Pastikeun voltage and current ratings of your electrical equipment do not exceed the timer's capacity (30A, 250V AC).
• Do not expose the timer to moisture or extreme temperatures outside its specified operating range (-20°C to +50°C).
• Verify all wiring connections are secure and correct according to the wiring diagram. Loose connections can cause overheating or fire.
• Alat ieu dirarancang pikeun pamakéan jero rohangan wungkul.

4. Setup jeung Instalasi

4.1 Ngabongkar bungkusan sareng Inspeksi Awal

Carefully remove the timer from its packaging. Inspect the device for any signs of damage. If damaged, do not install and contact your supplier.

4.2 Pamasangan

The TM616 timer is designed for Din Rail mounting. Securely attach the timer to a standard 35mm Din Rail within your electrical panel or enclosure.

Gambar 1: Tukangeun view of the TM616 timer, illustrating the yellow Din Rail mounting clip. This clip allows the device to be securely attached to a standard Din Rail in an electrical enclosure.

4.3 Kabel

Refer to the wiring diagram printed on the side of the timer for correct connections. Ensure the power supply matches the timer's voltage rating (110V AC, 220V AC, or 12V DC, depending on your specific model). Connect the load (electrical equipment) to the output terminals. Ensure all connections are tight and insulated.

Gambar 2: Angled view of the TM616 timer, displaying the wiring diagram label on its side. This diagram provides essential information for connecting the power input and the electrical load to the timer.

4.4 Initial Power-Up and Battery Charging

After wiring, apply power to the timer. The built-in rechargeable battery will begin charging. For optimal battery backup performance, allow the timer to be powered for at least 4 hours before initial programming or if it has been stored for an extended period.

5. Parentah Operasi

Gambar 3: Hareupeun view of the SINOTIMER TM616 digital timer, showing the LCD display and control buttons (Clock, Timer, Week, Hour, Minute, C/R, Manual).

5.1 Fungsi Tombol

• Jam: Used to set the current time and day.
• TIMER: Used to enter and exit programming mode for ON/OFF cycles.
• Minggu: Adjusts the day of the week.
• jam: Adjusts the hour.
• Menit: Adjusts the minute.
• C/R (Cancel/Recall): Clears current settings or recalls saved programs.
• Manual: Toggles between ON, OFF, and AUTO modes.

5.2 Nyetél Waktos sareng Poé Ayeuna

1. Pencét jeung tahan tombol Jam kancing.
2. Bari nyekelan Jam, pencét Minggu pikeun ngeset dinten ayeuna dina saminggu.
3. Bari nyekelan Jam, pencét jam pikeun ngeset jam ayeuna.
4. Bari nyekelan Jam, pencét Menit pikeun nyetél menit ayeuna.
5. Ngaleupaskeun Jam tombol pikeun nyimpen setélan.

5.3 Programming ON/OFF Cycles (17 Settings)

Pangatur waktu ngamungkinkeun dugi ka 17 program ON/OFF. Unggal program diwangun ku waktos ON sareng waktos OFF.

1. Pencét éta TIMER tombol sakali. Layar bakal némbongkeun "1 ON".
2. Pencét Minggu to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. Pencét jam to set the ON hour.
4. Pencét Menit to set the ON minute.
5. Pencét TIMER deui. Layarna bakal némbongkeun "1 OFF".
6. Pencét Minggu to select the desired day(s) for this OFF program (usually the same as the ON program).
7. Pencét jam to set the OFF hour.
8. Pencét Menit to set the OFF minute.
9. Repeat steps 1-8 for additional ON/OFF programs (up to 17). Press TIMER to cycle through program numbers (2 ON, 2 OFF, ..., 17 ON, 17 OFF).
10. Saatos netepkeun sadaya program anu dipikahoyong, pencét tombol Jam tombol pikeun kaluar mode programming tur balik ka tampilan waktos ayeuna.

To clear a specific program, navigate to the desired ON or OFF setting using the TIMER tombol, teras pencét éta C/Urang Sunda kancing.

5.4 Kontrol Manual

Pencét éta Manual tombol pikeun siklus ngaliwatan modeu handap:

• ON: The output is continuously ON, overriding all programmed settings.
• Pareuman: The output is continuously OFF, overriding all programmed settings.
• Otomatis: The timer operates according to the programmed ON/OFF cycles. This is the standard operating mode.

Pastikeun timer aya dina OTOMATIS mode for automatic operation.

5.5 Resetting the Timer

To clear all settings and reset the timer to its factory defaults, locate the small reset button (often recessed) and press it using a pointed object (e.g., a pen tip). This will erase all programmed times and reset the clock.

6. Pangropéa

• beberesih: Wipe the timer's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Batré: The internal rechargeable battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement. This should be performed by a qualified technician.
• Pamariksaan: Pariksa sambungan kabel sacara berkala pikeun ayana pageuh sareng tanda-tanda karusakan.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact SINOTIMER customer service directly. Keep your purchase receipt as proof of purchase.

Pikeun pitulung salajengna, buka di SINOTIMER Store on Amazon.