1. Bubuka jeung Leuwihview
The Siemens PN Series Load Center is designed to provide a high-quality, feature-rich solution for various electrical applications. This load center offers maximum flexibility and incorporates labor-saving features to assist during installation. Key features include compatibility with Plug-on Neutral breakers, a patented Insta-Wire neutral/ground system, convertibility, copper bussing, and mounting tabs on the trim. These design elements are engineered to reduce installation time and enhance overall flexibility.
2. Émbaran Kasalametan
PERHATOSAN: This product must be installed, adjusted, and serviced by a qualified electrician or licensed personnel only. Improper installation or maintenance can result in electric shock, fire, or other hazards, leading to serious injury or death. Always disconnect power at the main service panel before working on this equipment. Follow all local and national electrical codes and regulations. Do not attempt to modify the load center or its components.
3. Fitur Produk
- Plug-On Neutral Design: Facilitates simple and quick installation of compatible breakers.
- Spacious Wire Bending Room: Provides over 4 inches of space for wire bending, simplifying wiring.
- Secure and Reliable Installation: Engineered for confident and stable connections.
- Factory Installed Ground Bars: Includes two ground bars for convenience.
- Kasaluyuan Sistim: Designed for 1-phase, 3-wire, 120/240V electrical systems.
- High Interrupt Rating: Features a 100,000 AIC interrupt rating for enhanced safety.
- NEMA Type 1 Enclosure: Cocog jeung pamakéan indoor.
- Copper Bussing: Ensures excellent conductivity and durability.
4. Spésifikasi
| Spésifikasi | Rincian |
|---|---|
| merek | SIEMENS |
| Nomer modél | PN2020L1125C |
| Adaptor AC Ayeuna | 125 Amps |
| Bahan | Tambaga |
| Jumlah Sirkuit | 20 |
| Jenis Fase | Fase Tunggal |
| Item Beurat | 22.8 pon |
| Dimensi produk | 14.25 x 3.88 x 21 inci |
| Warna | kulawu |
| Komponén Kaasup | Pusat Beban, Lambaran Instruksi |
5. Pamasangan
Installation of the Siemens PN Series Load Center should only be performed by a qualified electrician in accordance with all applicable electrical codes. The following provides an overview of key components and features relevant to installation.
Installation Video: Siemens Plug-On Neutral Load Center and Breakers
This official Siemens video demonstrates the installation process for Plug-On Neutral breakers within the load center. It highlights the simplified wiring practice, the spacious wire bending room, and the secure connection mechanism, providing a visual guide to the product's key installation benefits.
6. Operasi
Once properly installed and wired, the Siemens PN Series Load Center functions as the central distribution point for electrical power within a building. Circuit breakers installed in the load center protect individual circuits from overcurrents and short circuits. In the event of an electrical fault, a circuit breaker will trip, interrupting the flow of electricity to that circuit. To restore power, identify and correct the fault, then reset the tripped breaker by moving its handle fully to the 'OFF' position and then to the 'ON' position.
7. Pangropéa
Regular maintenance of the load center is minimal but important for continued safe operation. Periodically, a qualified electrician should inspect the load center for any signs of wear, corrosion, loose connections, or damage. Ensure the area around the load center remains clear and accessible. Do not store flammable materials near the load center. Cleaning should be limited to wiping the exterior with a dry cloth; never use liquids or abrasive cleaners inside the panel.
8. Cara ngungkulan
If an electrical issue occurs, such as a tripped circuit breaker, follow these general troubleshooting steps:
- Identipikasi Breaker Anu Katingker: Locate the breaker with its handle in the middle or 'OFF' position.
- Disconnect Appliances: Unplug or turn off all appliances and lights on the affected circuit.
- Reset Breaker: Firmly push the breaker handle to the full 'OFF' position, then to the full 'ON' position.
- Monitor: If the breaker trips again immediately, there is likely a persistent fault (e.g., short circuit or overloaded circuit). Do not attempt to reset it repeatedly.
- Kontak profésional: For persistent issues or any concerns regarding electrical safety, contact a qualified electrician. Do not attempt repairs yourself.
9. Garansi jeung Rojongan
This Siemens product is covered by the manufacturer's standard warranty. For specific warranty details, terms, and conditions, please refer to the documentation included with your purchase or visit the official Siemens website. For technical support, product inquiries, or to locate authorized service providers, please visit the Toko Siemens dina Amazon or the main Siemens support portal.
