1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your ICO Bath K402W Kontour Hardwired Towel Warmer. Please read all instructions carefully before installation and use to ensure safe and proper functioning of the unit. Retain this manual for future reference.
2. Émbaran Kasalametan
PERHATOSAN: Electrical installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.
- Ensure the power supply is disconnected at the circuit breaker before beginning any installation or maintenance.
- Parabot ieu didesain kanggo panggunaan hungkul.
- Ulah ngalelepkeun panghampang anduk kana cai atanapi cairan anu sanés.
- Do not use the towel warmer to dry items other than towels or garments suitable for drying on a heated surface.
- Keep children away from the towel warmer when it is in operation. The surface can become hot.
- Ensure proper grounding as per electrical codes.
3. Eusi Paket
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- ICO Bath K402W Kontour Towel Warmer Unit
- Mounting Hardware (screws, anchors, mounting brackets)
- Citakan Pamasangan
- Manual pangguna (dokumén ieu)
4. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Modél | K402W |
| Ukuran (H x W x D) | 40" x 18" x 4" |
| Jinis kakuatan | Kawat kabel |
| Voltage | 110 V |
| Wattage | 110 watt |
| Bahan | Beusi sténless |
| Bérés | Chrome |
| Jumlah Bar | 9 |
| Item Beurat | 10 pon |
5. Setup jeung Instalasi
Professional installation by a qualified electrician is recommended for this hardwired unit.
5.1. Planning the Installation Location
- Choose a wall location that is structurally sound and can support the weight of the towel warmer and wet towels.
- Ensure the location is within reach of the intended electrical connection point.
- Maintain adequate clearance from other fixtures, walls, and flammable materials.
5.2. Mounting the Towel Warmer
- Nyiapkeun Tembok: Use the provided installation template to mark the drilling points for the mounting brackets on the wall. Ensure the template is level.
- liang bor: Bor liang pilot di lokasi anu ditandaan. Pasangkeun jangkar témbok upami diperyogikeun, gumantung kana bahan témbok anjeun.
- Pasang kurung: Ngamankeun kurung ningkatna kana témbok ngagunakeun screws disadiakeun.
- Position Towel Warmer: Carefully align the towel warmer with the mounting brackets and secure it in place.
Gambar 1: Hareupeun view of the ICO Bath K402W Kontour Chrome Towel Warmer.
5.3. Sambungan Listrik (Hardwired)
PENTING: Turn off power at the main circuit breaker before proceeding with electrical connections.
- Wiring aksés: Locate the electrical junction box or wiring point behind the towel warmer.
- Sambungkeun kawat: Connect the towel warmer's electrical wires to the household wiring according to local electrical codes. Typically, this involves connecting the live (black) wire, neutral (white) wire, and ground (green or bare copper) wire.
- Sambungan Aman: Ensure all wire connections are secure using appropriate wire nuts or connectors.
- Nyumputkeun Kabel: Carefully push the wires back into the junction box and secure the cover plate. The design of the K402W allows for concealed screws for a clean aesthetic.
- Mulangkeun Daya: Sakali sadaya sambungan aman sareng unit dipasang, balikkeun kakuatan dina pemutus sirkuit.
Figure 2: ICO Bath K402W Kontour Towel Warmer installed in a bathroom setting.
6. Parentah Operasi
The ICO Bath K402W Kontour Towel Warmer features an integrated On/Off switch for simple operation.
- Daya Hurung: Locate the On/Off switch on the towel warmer unit. Press the switch to the 'On' position. An indicator light (if present) may illuminate.
- Waktos manaskeun: Allow approximately 15-30 minutes for the towel warmer to reach its optimal operating temperature.
- Place Towels: Drape towels or garments over the bars. Do not overload the unit. Ensure air can circulate around the towels for efficient warming.
- Pareum listrik: When not in use, or when towels are sufficiently warmed/dried, press the On/Off switch to the 'Off' position.
7. Pangropéa
Regular cleaning and maintenance will ensure the longevity and optimal performance of your towel warmer.
- beberesih: Rapihkan permukaan anduk dengan lembut, damp cloth. For stubborn spots, use a mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or solvents, as these can damage the chrome finish.
- Do Not Polish: The chrome finish is designed to resist tarnishing. Avoid using metal polishes, which can alter the finish.
- Pamariksaan: Periodically inspect the electrical cord and connections for any signs of damage or wear. If damage is observed, discontinue use and contact a qualified electrician or ICO Bath customer support.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Panghampang anduk teu panas. | Taya catu daya. Saklar on/off pareum. Wiring lepat. | Pariksa circuit breaker. Ensure switch is in 'On' position. Hubungi tukang listrik anu mumpuni. |
| Towel warmer is not getting hot enough. | Overloaded with too many towels. Ambient room temperature is too low. | Reduce the number of towels. Allow more time for heating. |
| Unit ngaluarkeun sora anu teu biasa. | Masalah komponén internal. | Disconnect power and contact customer support. |
If you encounter issues not listed here, or if the suggested solutions do not resolve the problem, please contact ICO Bath customer support.
9. Émbaran jaminan
The ICO Bath K402W Kontour Towel Warmer is covered under ICO Bath's limited warranty for parts. A 2-year commercial warranty is also provided. For specific terms and conditions of your warranty, please refer to the warranty documentation included with your purchase or visit the official ICO Bath websitus.
10. Rojongan
For further assistance, technical support, or to inquire about replacement parts, please contact ICO Bath customer service:
- Websitus: www.icobath.com (Mangga pariksa resmi websitus pikeun inpo kontak panganyarna.)
- Telepon: Refer to the ICO Bath websitus pikeun nomer kontak régional.
