Nedis Motorized TV Wall Mount TVWM5850BK

Bubuka

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Nedis Motorized TV Wall Mount, model TVWM5850BK. Please read this manual thoroughly before installation and retain it for future reference. This motorized wall mount is designed to securely hold flat-screen televisions ranging from 37 to 70 inches.

Émbaran Kasalametan

Awas: Improper installation or use of this product can result in serious injury or damage. Always follow these safety guidelines:

• Pastikeun struktur témbok tiasa ngadukung beurat gabungan tina gunung sareng televisi anjeun. Taroskeun ka profésional upami teu yakin.
• Do not exceed the maximum weight capacity specified in the 'Specifications' section.
• produk ieu dimaksudkeun pikeun pamakéan indoor wungkul.
• Jauhkeun barudak sareng piaraan ti daérah pamasangan.
• Use only the provided hardware or manufacturer-approved replacements.
• Ensure all electrical connections are made correctly and safely.
• Do not attempt to modify the mount.

Eusi pakét

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact your retailer.

Image: All components included in the Nedis Motorized TV Wall Mount TVWM5850BK package.

• Main Wall Plate Assembly
• Panangan Bracket TV (2x)
• Motorized Arm Assembly
• Adaptor Daya sareng Kabel
• Kadali jauh
• Mounting Hardware Kit (screws, anchors, washers for wall and TV attachment)
• Klip Manajemén Kabel

Setup sareng Instalasi

Professional installation is recommended for optimal safety and performance. Ensure you have the necessary tools (drill, level, stud finder, screwdriver) before proceeding.

1. Instalasi témbok Gunung

1. Pilih Lokasi: Choose a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
2. Mark Drilling Holes: Use the wall plate as a template to mark the drilling holes. Use a level to ensure accuracy.
3. liang bor: Drill pilot holes according to the marked positions and the type of wall (wood stud, concrete, brick). Insert appropriate wall anchors if necessary.
4. Ngagantelkeun Piring Tembok: Secure the main wall plate assembly to the wall using the provided screws and washers. Ensure it is firmly attached and level.

2. Attaching TV Brackets to Television

1. Identify VESA Pattern: Locate the VESA mounting holes on the back of your television.
2. Pilih Screws: Choose the correct diameter and length of screws from the hardware kit that fit your TV's VESA pattern.
3. Pasang kurung: Secure the two TV bracket arms to the back of your television using the selected screws and washers. Ensure they are oriented correctly and tightened securely.

3. Mounting Television to Wall Mount

1. Hook TV: Carefully lift the television (with attached brackets) and hook the TV brackets onto the main wall mount assembly.
2. TV anu aman: Engage the safety locking mechanisms on the TV brackets to prevent accidental dislodgement.

4. Sambungan Daya

1. Sambungkeun Kakuatan: Plug the power adapter into the motorized arm assembly and then into a suitable power outlet.
2. Manajemén Kabel: Use the provided cable management clips to route cables neatly and prevent interference with the mount's movement.

Image: The motorized TV wall mount in an extended position, illustrating its range of motion.

Parentah Operasi

The Nedis Motorized TV Wall Mount is operated using the included remote control.

Image: Remote control for the motorized TV wall mount.

Fungsi Remote Control:

• Panah Arah (Luhur/Ka handap/Kénca/Katuhu): Control the extension, retraction, swivel, and tilt of the TV mount.
• Tombol OK: Confirms selections atawa lampah.
• Tombol SET: Used for programming memory positions.
• MEM1 / MEM2 Buttons: Recall pre-set viewdina posisi.

Nyetél Posisi Mémori:

1. Adjust the TV to your desired position using the directional arrows.
2. Pencét éta SET button. The indicator light on the remote may flash.
3. Pencét boh MEM1 or MEM2 within a few seconds to save the current position. The indicator light will confirm.

Recalling Memory Positions:

• Kantun pencét MEM1 or MEM2 to move the TV to its saved position.

Pangropéa

Pangropéa rutin mastikeun umur panjang sareng operasi anu aman tina dudukan TV dina témbok anjeun.

• beberesih: Ngusap gunung ku lawon lemes, garing. Ulah make cleaners abrasive atawa pangleyur.
• Cék périodik: Périodik pariksa sagala screws sareng sambungan pikeun mastikeun aranjeunna tetep kedap tur aman.
• Inspeksi Motor: Listen for any unusual noises during operation. If you notice any issues, discontinue use and contact support.

Pamérésan masalah

If you encounter problems with your motorized TV wall mount, refer to the following common issues and solutions:

spésifikasi

Image: Technical drawing with dimensions of the TVWM5850BK mount.

• model: TVWM5850BK
• merek: Nedis
• Jenis produk: Tembok TV Motorized
• Bahan: Alloy Steel
• Ukuran TV Cocog: 37 - 70 inci
• Jenis gerakan: Articulating, Motorized
• Sudut Dengdekkeun Maksimum: 25 derajat
• Kasaluyuan VESA: Min 200x200mm to Max 600x400mm (approximate, refer to diagram for exact ranges)
• Kontrol: Kadali jauh

Garansi

This product is covered by the standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Nedis websitus pikeun istilah jeung kaayaan jaminan lengkep. Simpen bukti pameseran anjeun pikeun klaim garansi.

Ngarojong

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Nedis customer support. Contact information can typically be found on the product packaging or the official Nedis websitus.