Buku Panduan Pangguna Keyboard Gaming Mekanik Cosmic Byte CB-GK-18 Firefly TKL

Bubuka

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Cosmic Byte CB-GK-18 Firefly TKL Mechanical Gaming Keyboard. Please read this manual thoroughly to ensure optimal performance and longevity of your device.

Eusi pakét

• 1 x Cosmic Byte CB-GK-18 Firefly TKL Mechanical Gaming Keyboard
• 1 x Detachable USB-C Cable
• 1 x Keycap Puller
• 1 x Pindah Puller
• Additional Outemu Switches (for replacement)
• Manual pamaké

Fitur konci

Gambar: luhur-handap view of the Cosmic Byte CB-GK-18 Firefly TKL Mechanical Gaming Keyboard.

• Tenkeyless (TKL) Design: Compact 87-key layout for a smaller footprint and improved ergonomics.

Image: The compact size of the 87-key TKL keyboard, designed for a better gaming experience.
• Per-Key RGB Lighting: Customizable backlighting with 16.8 million colors and 18 preset configurations.
• Outemu Red Mechanical Switches: Linear switches designed for smooth and quiet operation, ideal for gaming and typing.
• Saklar Hot-Swappable: Easily replace switches with other 3-pin Outemu brand switches without soldering.
• Kabel USB-C anu tiasa dicabut: For convenient connectivity and portability.


Image: Close-up of the detachable USB-C port and durable keycaps.

• Anti-Ghosting nganggo N-Key Rollover: Ensures every key press is registered accurately, even during rapid multi-key inputs.

Image: Illustration highlighting the anti-ghosting capability for simultaneous key presses.
• Laju Polling 1000 Hz: Provides rapid response times with minimal input lag.


Image: Graphic illustrating the 1000 Hz polling rate for quick response.

• Desain ergonomis: Keycaps lean backward and forward, with fold-out legs for adjustable typing height.


Image: Ergonomic design with adjustable height and multifunctional hotkeys.

• Konstruksi awét: Features a sturdy frame and scratch-resistant double-shot keycaps with a 50 million keystroke life.
• Macro & Software Support: Customize key functions and RGB lighting via dedicated software (Windows compatible).

Guide Setup

1. Buka bungkus kibor: Cabut kibor sareng asesorisna tina bungkusna kalayan ati-ati.
2. Sambungkeun Kabel USB-C: Insert the detachable USB-C cable into the port on the keyboard and connect the other end to an available USB port on your computer.
3. Pamasangan supir: Your operating system (Windows 10 or later recommended) should automatically detect and install the necessary drivers.
4. Adjust Keyboard Height: Balikkeun suku anu tiasa diatur di handapeun kibor pikeun nyetel sudut ngetik anu dipikahoyong.
5. Pamasangan parangkat lunak (Opsional): For advanced customization, download and install the Cosmic Byte software from the official website. Refer to the "Software Installation & Use" section for more details.

Parentah Operasi

Kontrol Lampu RGB

Image: Per-key RGB lighting with 16.8 million color options.

The CB-GK-18 Firefly keyboard features per-key RGB lighting with multiple preset effects. Use the following key combinations to control the lighting:

• Fn + INS: Cycle through 18 preset lighting modes.
• Fn + DEL: Change lighting color in certain modes.
• Fn + Imah: Adjust lighting brightness (5 levels).
• Fn + Tungtung: Adjust lighting speed (5 levels).
• Fn + Page Up: Hurungkeun / pareum lampu tukang.

Hotkeys Multimedia

Access multimedia functions using the Fn key in combination with the F-keys:

• Fn+F1: Komputer abdi
• Fn+F2: neangan
• Fn+F3: Kalkulator
• Fn+F4: Pamuter média
• Fn+F5: Lagu saméméhna
• Fn+F6: Lagu salajengna
• Fn+F7: Play / Reureuh
• Fn+F8: Eureun
• Fn+F9: Ngajempékeun
• Fn+F10: Volume Turun
• Fn+F11: Volume Up
• Fn+F12: Konci kibor

Pindah Guide ngagantian

The CB-GK-18 Firefly keyboard features hot-swappable Outemu mechanical switches, allowing for easy replacement without soldering. This feature enables customization of typing feel and quick repair of faulty switches.

Image: Illustration of Outemu swappable switches, including the key puller and switch puller.

1. Hapus Keycap: Use the included keycap puller to gently remove the keycap from the switch you wish to replace.
2. Leupaskeun switch: Use the included switch puller. Align the prongs of the switch puller with the two clips on the top and bottom of the switch. Squeeze the clips and gently pull the switch upwards to remove it from the PCB.
3. Selapkeun Switch Anyar: Take a new 3-pin Outemu mechanical switch. Ensure the pins on the bottom of the new switch are straight. Align the pins with the holes on the PCB and gently press the switch down until it clicks into place. Do not force the switch; if it doesn't go in easily, check the pins for bending.
4. Ganti Keycap: Place the keycap back onto the new switch, pressing down firmly until it is secure.
5. Tes: Uji saklar anyar pikeun mastikeun éta fungsina leres.

Catetan: This keyboard is compatible only with 3-pin Outemu brand switches.

Software Instalasi & Paké

Image: Macro customizations and software support for Windows.

The Cosmic Byte CB-GK-18 Firefly keyboard supports customization through dedicated software, compatible with Windows operating systems. This software allows you to:

• Create and assign macros to keys.
• Customize per-key RGB lighting with a full spectrum of 16.8 million colors.
• Atur deui fungsi konci.
• Save multiple profiles pikeun aplikasi atawa kaulinan béda.

To download the software, visit the official Cosmic Byte website and navigate to the support or downloads section for the CB-GK-18 Firefly model. Follow the on-screen instructions for installation.

Pangropéa

• Ngabersihan Keycaps: Use the keycap puller to remove keycaps. Clean them with a soft cloth dampdikumbah ku sabun lembut sareng cai. Pastikeun aranjeunna tos rengse garing saméméh reattaching.
• Ngabersihkeun Dasar Keyboard: Use a can of compressed air to remove dust and debris from between the switches. Wipe the surface with a dry, soft cloth.
• Hindarkeun Cairan: Ulah ngabahekeun cairan dina kibor. Bisi tumpahan teu kahaja, geura pegatkeun sambungan keyboard sareng ngantepkeunana dugi ka garing sateuacan nyambungkeun deui.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

Your Cosmic Byte CB-GK-18 Firefly TKL Mechanical Gaming Keyboard comes with a standard brand warranty. For warranty claims, technical support, or any product-related inquiries, please contact Cosmic Byte customer support.

You can reach customer support via:

• Customer Support Portal: Nganjang support.thecosmicbyte.com pikeun nyieun tikét rojongan.
• Surélék: Send your inquiries to cc@thecosmicbyte.com.

When contacting support, please provide your product model (CB-GK-18 Firefly), purchase date, and a detailed description of the issue. Having your tax invoice and product images/videos ready can expedite the process.