1. Bubuka
Thank you for choosing the HOFTRONIC T8 IP65 LED Tube Light Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting product. Please read these instructions carefully before installation and retain them for future reference.
This fixture is designed for use in damp environments such as garages, warehouses, and outdoor areas, offering reliable and efficient illumination.
2. Parentah Kasalametan
- Kasalametan listrik: Installation should only be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before any installation, maintenance, or repair work.
- Voltage: Pariksa yén suplai voltage matches the fixture's specified voltage (220-240V AC).
- Peunteun IP65: The fixture is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. Ensure all seals and cable glands are properly secured during installation to maintain this rating.
- Pamasangan: Mount the fixture securely on a stable surface. Do not install on surfaces that are prone to vibration or excessive heat.
- Panas: Do not cover the fixture with insulating material. Ensure adequate ventilation around the unit.
- Ruksakna: Ulah ngoperasikeun alatna upami ruksak. Hubungi dukungan palanggan pikeun kéngingkeun bantosan.
3. Eusi Paket
Bungkus kotakna kalawan ati-ati sareng pastikeun sadaya komponén aya sareng henteu ruksak. Upami aya bagian anu leungit atanapi ruksak, hubungi pangecér anjeun.
Image: Package contents including the fixture, LED tubes, wall plugs, mounting screws, and brackets.
- 1x HOFTRONIC IP65 LED Fixture (Double, 120cm)
- 2x HOFTRONIC LED T8 Tubes (18W, 140lm/W, 120cm, 4000K)
- 4 x Colokan Tembok
- 4x Pasang Sekrup
- 2x Stainless Steel Mounting Brackets
- 2x LED Starters (for T8 tubes)
4. Produk Langkungview
The HOFTRONIC T8 IP65 LED Tube Light Fixture is a robust and energy-efficient lighting solution. It features a durable polycarbonate enclosure and stainless steel clamps, making it suitable for challenging environments.
Gambar: Hareupeun view of the HOFTRONIC T8 IP65 LED Tube Light Fixture.
Gambar: Tukangeun view of the fixture, illustrating the mounting points and cable entry gland.
Fitur konci:
- IP65 Tahan Cai & Kekebul: The fixture's enclosure and stainless steel clamps ensure protection against dust and water, making it ideal for indoor and outdoor use.
- IK06 Impact Resistance: Constructed with high-impact polycarbonate, the fixture offers enhanced durability and a long lifespan.
- G13 Fitting & Linkable: The fixture is equipped with G13 fittings, compatible with T8 LED tubes. Multiple fixtures can be linked in series for extended lighting coverage.
- Flicker-Free LED Driver: Features a patented design that provides stable light output, reducing eye strain and headaches.
- LED Starter Included: Easily retrofit traditional tube light fixtures with the included LED starter.
Image: Visual representation of the fixture's IP65 water and dust resistance.
Image: Highlighting the IK06 rating and robust polycarbonate construction.
Image: Close-up of the G13 fitting, showing its design for T8 LED tubes and series linking capability.
Image: Detail of the LED tube, highlighting the flicker-free technology and 140 lumen/Watt efficiency.
Image: Close-up of the LED starter, showing its 0.5A 250V/AC specifications.
5. Setup jeung Instalasi
penting: Pastikeun catu daya utama dipareuman sateuacan ngamimitian pamasangan.
- Pilih Lokasi: Select a suitable mounting location, ensuring it is a stable surface capable of supporting the fixture's weight.
- Tanda titik pangeboran: Use the mounting brackets to mark the drilling points on the chosen surface.
- liang bor: Bor liang dina titik ditandaan terus selapkeun colokan témbok.
- Pasang kurung: Secure the stainless steel mounting brackets to the surface using the provided screws.
- Perlengkapan Gunung: Carefully attach the LED fixture to the mounted brackets.
- Wiring: Open the wiring compartment. Connect the main power supply cable to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth). Use the cable gland to maintain the IP65 rating.
- Selapkeun Tabung LED: Insert the two T8 LED tubes into the G13 fittings. Ensure they are securely twisted into place.
- Install LED Starters: Replace any existing fluorescent starters with the provided LED starters.
- Tutup Perlengkapan: Close the wiring compartment and ensure all clips are securely fastened to maintain the IP65 seal.
- Tes: Balikkeun kakuatan sarta nguji fixture nu.
6. Parentah Operasi
The HOFTRONIC T8 IP65 LED Tube Light Fixture operates by connecting it to a standard 220-240V AC power supply. Once installed and connected to a switch, simply toggle the switch to turn the light on or off.
fixture ieu teu dimmable.
7. Pangropéa
- beberesih: Cabut daya sateuacan dibersihkeun. Lap perlengkapan nganggo kapas anu lemesamp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Pamariksaan: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals and cable glands remain intact to maintain the IP65 rating.
- ngagantian tube: The LED tubes have a long lifespan of approximately 50,000 hours. If replacement is necessary, ensure power is off and use compatible T8 LED tubes with G13 bases.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu teu hurung | Taya catu daya Sambungan kabel leupas Tube LED salah | Check power switch and circuit breaker Pastikeun sadaya sambungan kabel aman (pastikeun listrik pareum) Replace LED tube with a known working one |
| Cahya ngageleber | Loose LED tube Incompatible starter (if retrofitting) Instability catu daya | Ensure LED tube is securely seated Confirm the correct LED starter is used Taroskeun ka tukang listrik pikeun mariksa catu daya |
| Asup cai | Improperly sealed cable gland or clips Parumahan ruksak | Ensure all seals and cable glands are tightened correctly Inspect housing for cracks; replace fixture if damaged |
9. Spésifikasi
Image: Detailed product data sheet.
| Fitur | Spésifikasi |
|---|---|
| merek | HOFTRONIC |
| Nomer modél | 512559 |
| Ukuran produk (L x W x H) | 127.2 x 10.2 x 7.3 cm |
| Item Beurat | 5 kg |
| Bahan | Aluminium, Plastik |
| Warna | Bodas |
| Gaya | Modern |
| Jenis Bohlam | LED (T8 tubes) |
| Jumlah Bulbs | 2 |
| Voltage | 220-240 Volt AC |
| Kakuatan | 36 Watts (2 x 18W LED tubes) |
| Fluks Luminous | 5040 lm |
| Suhu Warna | 4000 Kelvin (Bodas Netral) |
| Indéks Rendering Warna (CRI) | > 80 Ra |
| Sudut Beam | 140° |
| Faktor kakuatan | > 0.95 |
| Energy Efficiency Class (Old) | A++ |
| Kelas Efisiensi Énergi (Anyar) | C |
| Peunteun IP | IP65 (Tahan cai) |
| Dimmable | No |
| Suhu Operasi | -20 °C nepi ka 45 °C |
| Ngalih siklus | 100,000 siklus |
| Rata Kahirupan | 50,000 Jam |
| Sertifikasi | CE, EMC, RoHS, TÜV, LM80 |
| Tipe Pamasangan | Tembok Gunung |
| Jero rohangan / pamakéan outdoor | Luar |
Image: EU Energy Label. For more details, visit eprel.ec.europa.eu/qr/1548106
10. Garansi jeung Rojongan
HOFTRONIC nyadiakeun a garansi 5 taun for this product, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For technical assistance, warranty claims, or any questions regarding your HOFTRONIC product, please contact your retailer or visit the official HOFTRONIC websitus pikeun inpormasi dukungan palanggan.
