Artemide Tolomeo Wall Surface Bracket Instruction Manual

Produk Leuwihview

The Artemide Tolomeo Wall Surface Bracket (Model A025150) is an accessory designed for mounting various Artemide Tolomeo lamps directly to a wall surface. This bracket provides a stable and secure attachment point for compatible Tolomeo lamp models, allowing for flexible lighting solutions.

Kasaluyuan: This bracket is compatible with Artemide Tolomeo Micro, Mini, Ordinary, and Braccio Wall lamps.

Fitur konci:

• Designed for wall mounting of Artemide Tolomeo lamps.
• Diwangun tina aluminium anu awét.
• Lightweight design: approximately 0.33 lbs (0.15 kg).
• Country of Origin: Italy.

Émbaran Kasalametan

• Baca sagala parentah taliti saméméh instalasi.
• Ensure the mounting surface is structurally sound and capable of supporting the bracket and the attached lamp.
• Use appropriate tools and fasteners for your specific wall type (e.g., drywall anchors, wood screws, masonry anchors).
• If you are unsure about installation, consult a qualified electrician or professional installer.
• Tetep bagian leutik jauh ti barudak.
• Do not modify the bracket in any way.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Artemide Tolomeo Wall Surface Bracket (Model A025150)
• Note: Mounting hardware (screws, anchors) and the Tolomeo lamp are sold separately and are not included with this bracket.

Setup sareng Instalasi

This section provides general guidelines for installing the Artemide Tolomeo Wall Surface Bracket. Specific installation steps may vary based on your wall material and the type of Tolomeo lamp being mounted.

1. Nyiapkeun Lokasi Pasang: Choose a suitable location on the wall that can support the weight of the bracket and the lamp. Ensure there are no electrical wires or plumbing pipes behind the drilling area.
2. Tanda titik pangeboran: Hold the bracket against the wall at the desired height and position. Use a pencil to mark the locations for the mounting screws. Ensure the bracket is level before marking.
3. Bor Pilot liang: Using an appropriate drill bit for your wall type and chosen fasteners, drill pilot holes at the marked locations. If using wall anchors, insert them now according to their instructions.
4. Pasang Bracket: Align the bracket with the drilled holes and secure it to the wall using suitable screws. Tighten the screws firmly but do not overtighten, which could damage the bracket or wall.

Gambar 1: Hareupeun view of the Artemide Tolomeo Wall Surface Bracket, showing its aluminum finish and mounting design.
5. Mount the Tolomeo Lamp: Once the bracket is securely installed, attach your compatible Artemide Tolomeo lamp according to its specific instructions. The bracket is designed to receive the lamp's mounting arm or base.


Image 2: The Artemide Tolomeo Wall Surface Bracket shown with a compatible Tolomeo lamp arm attached, demonstrating its functional use.

6. Cék ahir: Gently test the stability of the installed bracket and lamp to ensure it is secure and properly mounted.


Gambar 3: A close-up view of the Artemide Tolomeo Wall Surface Bracket, highlighting its aluminum construction and design details.

Parentah Operasi

The Artemide Tolomeo Wall Surface Bracket serves as a fixed mounting point for your Tolomeo lamp. Its operation is passive, providing structural support. The functionality and operation of the lamp itself are governed by the lamp's individual instruction manual.

Pangropéa

• beberesih: To clean the bracket, wipe it with a soft, dry cloth. For stubborn marks, a slightly damp lawon anu dieusi sabun hampang tiasa dianggo, teras dikeringkeun tuntas. Hindarkeun pembersih atanapi pelarut anu abrasif.
• Pamariksaan: Periodically check the bracket and its mounting screws for any signs of loosening or damage. Tighten screws if necessary.
• Kaayaan Lingkungan: Ensure the bracket is used in dry indoor environments. Avoid exposure to excessive moisture or extreme temperatures.

Pamérésan masalah

• Braket karasa leupas saatos dipasang: Ensure all mounting screws are properly tightened. If using wall anchors, verify they are correctly installed and suitable for the wall material. The wall itself might not be strong enough; consider reinforcing the mounting area or choosing a different location.
• Lamp does not fit the bracket: Confirm that your Tolomeo lamp model is listed as compatible with this bracket (Micro, Mini, Ordinary, Braccio Wall lamps). Refer to your lamp's manual for its specific mounting requirements.
• Scratches or damage during installation: Handle the bracket carefully during installation. Use appropriate tools and techniques to prevent cosmetic damage.

spésifikasi

Garansi sareng Rojongan

For information regarding warranty coverage, please refer to the documentation provided with your purchase or visit the official Artemide website. For technical support or inquiries, please contact Artemide customer service directly.