Bubuka
Thank you for choosing the PELONIS 16-inch Pedestal Fan. This manual provides important information regarding the assembly, operation, maintenance, and troubleshooting of your new fan. Please read it thoroughly before use and retain it for future reference.
This fan is designed to provide efficient and energy-saving cooling with its powerful motor and high-quality blades. It features three speed settings, an 85-degree wide oscillation angle, a 7-hour shut-off timer, and adjustable height and tilt for customized comfort.
Image: The PELONIS 16-inch Pedestal Fan, showcasing its sleek black design and adjustable stand.
Émbaran Kasalametan penting
Please read and follow all safety instructions to reduce the risk of fire, electric shock, or injury.
- Sok cabut kipas angin sateuacan ngabersihkeun atanapi ngalakukeun perawatan naon waé.
- Do not insert fingers or foreign objects into the grille when the fan is operating.
- Pastikeun kipas dipasang dina permukaan anu stabil pikeun nyegah tipping.
- Ulah ngoperasikeun kipas upami kabel atanapi colokanna rusak. Hubungi petugas servis anu mumpuni pikeun perbaikan.
- Jauhkeun kipas tina cai atanapi kalembaban anu kaleuleuwihi.
- The built-in overheat protection automatically switches the fan off when the motor overheats. If this occurs, unplug the fan and allow it to cool before restarting.
Eusi pakét
Sateuacan ngarakit, pastikeun sadaya komponén aya:
- Fan Head Assembly (Motor, Blades, Front and Rear Grilles)
- Adjustable Height Pole
- Dasar buleud
- Remote Control (merlukeun 2 batré AAA, teu kaasup)
- Mounting Hardware (screws, nuts, wrench)
Setup sareng Majelis
Follow these steps to assemble your PELONIS Pedestal Fan:
- Step 1: Attach the Base. Place the round base on a flat surface. Insert the bottom end of the adjustable height pole into the center hole of the base. Secure it from underneath the base using the provided screw and wrench.
- Step 2: Adjust Pole Height. Loosen the height adjustment knob on the pole. Extend the inner pole to your desired height (between 3.5 to 4 feet) and tighten the knob to secure it.
- Step 3: Mount the Motor Unit. Attach the fan motor unit to the top of the adjustable height pole. Ensure it is securely fastened with the provided screw and wrench.
- Step 4: Install Rear Grille. Place the rear grille onto the motor unit, aligning the notches. Secure it with the retaining nut provided.
- Step 5: Attach Fan Blades. Slide the fan blades onto the motor shaft, ensuring they are properly seated. Secure the blades with the spinner cap, turning it counter-clockwise to tighten.
- Step 6: Install Front Grille. Attach the front grille to the rear grille, ensuring the clips snap into place around the circumference. Secure the grilles with the small screw at the bottom.
Image: A visual guide demonstrating the six steps for assembling the PELONIS Pedestal Fan, from attaching the base to securing the grilles.
Parentah Operasi
Your PELONIS Pedestal Fan can be operated using the control panel on the fan unit or the included remote control.
Fungsi Panel Kontrol:
Gambar: A close-up view of the fan's control panel, showing buttons for Speed, Timer, and On/Off, along with indicator lights for speed and timer settings.
- Tombol ON/OFF: Pencét pikeun ngaktipkeun atanapi mareuman kipas.
- Tombol SPEED: Press repeatedly to cycle through the three speed settings: Low, Medium, and High. Corresponding indicator lights will illuminate.
- Tombol TIMER: Press repeatedly to set the automatic shut-off timer for 1, 2, 4, or 7 hours. The selected timer duration will be indicated by illuminated lights.
Kadali jauh:
The remote control allows convenient operation from a distance. Insert 2 AAA batteries (not included) into the remote before use.
Image: The remote control for the PELONIS Pedestal Fan, featuring buttons for power, speed, and timer functions.
- The remote control mirrors the functions of the control panel: ON/OFF, SPEED, and TIMER.
- Point the remote directly at the fan's control panel for optimal response.
Oscillation and Tilt Adjustment:
The fan features an 85-degree wide oscillation angle and a 24-degree tilt adjustment to customize airflow direction.
Image: A diagram illustrating the 90-degree oscillation and 24-degree tilt adjustment capabilities of the PELONIS Pedestal Fan, showing how to customize airflow.
- Osilasi: Press the oscillation button on the fan's control panel (not available on remote) to activate or deactivate the oscillating movement.
- Penyesuaian Dengdekkeun: Manually adjust the fan head up or down to direct airflow as needed.
Jangkungna adjustable:
The fan's height can be adjusted from 3.5 feet to 4 feet to suit various environments.
Image: A comparison showing the PELONIS Pedestal Fan at its minimum (3.5 ft) and maximum (4 ft) adjustable heights.
- To adjust height, loosen the height adjustment knob on the pole, slide the inner pole to the desired position, and then firmly tighten the knob.
Pangropéa
Pembersihan rutin ngabantosan ngajaga kinerja kipas sareng manjangkeun umurna.
- Ngabersihan kipas: Salawasna cabut heula kipas sateuacan dibersihkeun. Anggo kipas anu lemes sarengamp lawon pikeun ngusap surfaces exterior. Ulah make cleaners abrasive atawa pangleyur.
- Cleaning Fan Blades and Grilles: Periodically, the front grille can be removed to clean the fan blades and the inside of the grilles. Refer to the assembly instructions for grille removal. Ensure all parts are completely dry before reassembling and operating the fan.
- Panyimpenan: Upami henteu dianggo salami lami, simpen kipas di tempat anu tiis sareng garing, langkung saé dina bungkus aslina.
Pamérésan masalah
Upami anjeun mendakan masalah sareng kipas anjeun, tingali masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kipas angin teu hurung. | Not plugged in; power outlet not working; overheat protection activated. | Ensure fan is securely plugged into a working outlet. Unplug and allow to cool for 30 minutes if overheat protection is suspected. |
| Aliran hawa lemah. | Kecepatan kipas handap teuing; kisi-kisi atanapi bilahna kotor. | Naékkeun kagancangan kipas. Bersihkeun bilah sareng kisi-kisi kipas numutkeun pitunjuk pangropéa. |
| Kipas angin ribut. | Loose parts; fan not on a level surface; dirty blades. | Check for loose screws or components. Place fan on a stable, level surface. Clean fan blades. |
| Kadali jauh teu jalan. | Batteries are dead or incorrectly inserted; remote not pointed at sensor. | Replace batteries (2 AAA). Ensure correct polarity. Point remote directly at the fan's control panel. |
spésifikasi
- merek: PELONIS
- model: PFS40A4BBB
- warna: Hideung
- Desain kipas listrik: Kipas Lantai
- Sumber Daya: Kabel Listrik
- Ukuran produk: 15 "D x 17.91" W x 48.43" H
- Tipe Kamar: Bedroom, Living room, Kitchen, Home Office
- Fitur husus: Timer, Adjustable height, Adjustable Tilt, Oscillating
- Pamakéan anu disarankeun: Ventilating, Cooling, Air Circulation
- Tingkat Noise: 40 dB
Garansi sareng Rojongan
PELONIS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official PELONIS website. If you require assistance, please contact PELONIS customer service.
Note: This manual is for informational purposes. Product specifications and features may be subject to change without notice.
