1. Bubuka
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your SPIDER FARMER 6-inch Inline Duct Fan Kit with Temperature Controller. Please read this manual thoroughly before use to ensure safe and efficient operation of the product.
2. Émbaran Kasalametan
Salawasna turutan tindakan pencegahan kaamanan dasar pikeun ngirangan résiko kahuruan, sengatan listrik, sareng tatu ka jalma, kalebet ieu di handap:
- Baca sadaya parentah sateuacan nganggo produk ieu.
- Entong nganggo kipas nganggo kabel atanapi colokan anu rusak. Piceun kipas atawa balik deui ka fasilitas layanan otorisasi pikeun ujian jeung / atawa perbaikan.
- Ulah ngajalankeun ari handapeun karpét. Ulah nutupan ari ku karpet lémparan, runners, atawa coverings sarupa. Ulah jalur tali handapeun parabot atawa parabot. Atur tali jauh ti wewengkon lalulintas sarta dimana eta moal tripped leuwih.
- To disconnect the fan, turn controls to the OFF position, then remove plug from outlet.
- Use this fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Sok cabut kipas angin sateuacan beberesih atanapi ngalayanan.
- Pastikeun catu daya cocog sareng voltage syarat dieusian dina labél produk.
3. Eusi Paket
Pariksa yén sadaya komponén aya sareng dina kaayaan anu saé:
- 1 x 6-inch Inline Duct Fan
- 1 x Smart Temperature and Humidity Controller
- 1 x Carbon Filter
- 1 x Flexible Ducting (8m)
- 2 x Saluran Clamps
- 1 x Pre-filter for Carbon Filter
- 1 x Kabel Listrik
- 1 x RJ12 Fan to Controller Cord
Gambar 3.1: Leuwihview of the kit components.
4. Setélan
4.1 Connecting the Fan and Controller
The inline duct fan and smart controller are designed for simple and smart connection. The controller is powered by the inline fan via the RJ12 port, eliminating the need for an external power supply for the controller.
- Connect the power cord to the inline duct fan.
- Connect the RJ12 fan to controller cord from the inline fan to the RJ12 port on the smart controller.
- Plug the fan's power cord into a suitable electrical outlet. The controller will power on automatically.
Figure 4.1: Simple and smart connection of the fan and controller.
4.2 Installing the Carbon Filter and Ducting
The carbon filter is essential for odor control. The flexible ducting allows for versatile placement.
- Attach the carbon filter to one end of the inline duct fan. Ensure a tight seal to prevent air leaks. Use a duct clamp pikeun ngamankeunana.
- Attach the flexible ducting to the other end of the inline duct fan. Secure it with another duct clamp.
- Position the entire assembly within your grow tent or desired ventilation area. The fan and filter can be hung using ropes or straps (not included) to optimize space and airflow.
Figure 4.2: Premium Carbon Filter design.
Figure 4.3: Energy Efficient EC Motor and airflow.
4.3 Panempatan sénsor
The 3-in-1 sensor (temperature, humidity, light) provides crucial environmental data to the controller. Proper placement ensures accurate readings.
- Place the sensor in the center of your grow area, away from direct light sources or heat/cold drafts that could skew readings.
- Ensure the sensor is not obstructed by plants or other equipment.
Figure 4.4: High-Precision 3-in-1 Sensor.
4.4 Pidéo Pamasangan
The following videos demonstrate the installation process for the inline duct fan and carbon filter kit:
Video 4.1: Installation guide for a carbon filter kit in a hydroponic setup. This video demonstrates connecting the carbon filter to the fan and securing it with clamps, then installing the assembly into a grow tent.
Video 4.2: Demonstration of installing an air extractor with a carbon filter and exhaust pipe. This video shows the process of assembling the ventilation system components and mounting them.
Video 4.3: Guide for installing an air extractor fan with a controller. This video illustrates the steps to set up the fan and connect it to the control unit.
5. Parentah Operasi
5.1 Controller Leuwihview
The smart controller features multiple operating modes and 10 fan speeds, allowing for precise environmental control.
Figure 5.1: GGS Controller interface and navigation.
5.2 Nyetél Suhu sareng Kalembaban
The controller automatically adjusts fan speed based on your set temperature and humidity targets.
- Use the rotary knob to navigate through the menu options on the controller's display.
- Select the temperature setting and adjust to your desired value.
- Select the humidity setting and adjust to your desired value.
- The fan will automatically increase or decrease speed to maintain these set points.
5.3 Scheduling and Automatic Control
Program the fan to operate at specific times and speeds.
- Access the scheduling menu on the controller.
- Set start and end times for operation.
- Define the desired operation speed and standby speed for the scheduled period.
- Save your settings. The fan will follow the programmed schedule.
Figure 5.2: Scheduling and automatic control interface.
5.4 App Remote Control
Control your ventilation system remotely via a mobile application (if supported by your controller model).
- Download the official SPIDER FARMER app from your device's app store.
- Follow the in-app instructions to pair your controller with the app.
- Once connected, you can adjust fan speed, set timers, and monitor environmental conditions from your smartphone.
Figure 5.3: App remote control interface.
6. Pangropéa
6.1 Carbon Filter Maintenance
The carbon filter's effectiveness depends on regular maintenance.
- Pra-filter: The pre-filter should be cleaned regularly (every 2-4 weeks, depending on usage) to prevent clogging and maintain airflow. Remove the pre-filter, gently wash it with warm water and mild detergent, rinse thoroughly, and allow it to air dry completely before reattaching.
- saringan karbon: The activated carbon inside the filter has a limited lifespan. Replace the carbon filter every 6-12 months, or sooner if odors persist, to ensure optimal odor removal.
6.2 Pembersihan Kipas
Periodically inspect and clean the fan blades and housing.
- Pegatkeun Daya: Sok cabut kipas tina stop kontak sateuacan beberesih.
- Blades bersih: Use a soft brush or cloth to gently remove any dust or debris from the fan blades. Avoid using harsh chemicals or abrasive materials.
- Perumahan: Wipe down the exterior of the fan housing with a damp cloth. Ensure no moisture enters the motor or electrical components.
7. Cara ngungkulan
Tingali tabel di handap ieu pikeun masalah umum sareng solusina:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kipas angin teu hurung | No power; loose connection; faulty controller | Check power outlet; ensure all cables are securely connected; test controller functionality. |
| Aliran hawa goréng | Clogged filter; obstructed ducting; fan speed too low | Clean or replace pre-filter; check ducting for kinks or blockages; increase fan speed on controller. |
| Bau anu terus-terusan | Saturated carbon filter; air leaks in system | Replace carbon filter; check all connections for airtight seals. |
| Inaccurate sensor readings | Improper sensor placement; sensor dirty | Relocate sensor away from direct heat/light/drafts; gently clean sensor. |
| Controller teu ngabales | Loose RJ12 cable; power issue | Ensure RJ12 cable is firmly connected; verify fan is receiving power. |
8. Spésifikasi
Technical specifications for the SPIDER FARMER 6-inch Inline Duct Fan Kit:
| Fitur | Spésifikasi |
|---|---|
| Ukuran Saluran | 6 inci / 150 mm |
| Tiupan hawa | Nepi ka 402 CFM |
| Kakuatan | 65W ± 5% |
| Tingkat Noise | 32 dB(A) |
| Laju kipas | 3000 rpm |
| Voltage | AC 110-240V |
| Tipe Motor | EC Motor |
| Tipe Controller | Smart Suhu jeung Kalembaban Controller |
| Ducting Length (fully stretched) | 8 méter |
| Bahan | Plastic, Stainless Steel, Aluminum, Steel Alloy |
Figure 8.1: Product specifications and dimensions.
9. Garansi jeung Rojongan
SPIDER FARMER products are designed for quality and reliability. For warranty information, please refer to the warranty card included with your product or visit the official SPIDER FARMER website. If you encounter any issues or have questions regarding your product, please contact SPIDER FARMER customer support through the contact information provided on our website or your purchase platform. Our team is available to assist you with technical support and troubleshooting.
