Buku Panduan Pompa Cai Jebao DCW SINE DC anu Bisa Dikontrol (DCW-1500)

1. Bubuka

The Jebao DCW-1500 SINE DC Controllable Water Pump is designed for efficient and quiet water circulation in various aquatic systems. This 24V pump features a detachable controller, a high-quality ceramic shaft with a propeller bearing to minimize wear, and advanced variable speed flow technology. These features ensure precise control, enhanced performance, energy efficiency, and safe operation for both internal and external use in salt-water or fresh-water environments.

2. Émbaran Kasalametan

Please read and understand all safety instructions before operating the pump. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always disconnect the power supply before performing any maintenance or cleaning on the pump.
• Ensure the pump is fully submerged when used internally, or that water is flowing through it when used externally, to prevent dry running and overheating. The pump features an auto shut-off when no water is sensed.
• Entong jalankeun pompa upami kabel listrik atanapi colokan rusak.
• This pump is designed for water use only. Do not use with flammable or corrosive liquids.
• Keep the controller and power adapter away from water to prevent electrical hazards.
• Pastikeun sadaya sambungan aman sareng kedap cai pikeun nyegah bocor.

3. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

• Jebao DCW-1500 Pump Unit
• Adaptor AC (Catu Daya)
• Controller anu tiasa dicabut
• Hose Adapters (various sizes: 5/8", 3/4", 1")
• Screw Nuts (2x)
• O-cingcin (2x)
• Intake Screen/Cage
• Instruksi Manual

The image above displays all the components included with your Jebao DCW-1500 pump. This includes the main pump unit, the red and white controller, the black AC power adapter, a selection of white hose barb adapters for different hose sizes, two red screw nuts, two black O-rings, and the white intake screen. The instruction manual is also visible.

4. Spésifikasi

5. Setup jeung Instalasi

Follow these steps to properly set up your Jebao DCW-1500 pump:

1. Pilih Lokasi: Decide whether the pump will be used internally (submerged) or externally. Ensure the controller and power adapter are in a dry location, away from water.
2. Attach Intake Screen: For internal use, attach the white intake screen to the pump's inlet to prevent debris from entering the impeller. For external use, you may connect a hose directly to the inlet using an appropriate adapter.
3. Select Hose Adapter: Choose the correct hose adapter (5/8", 3/4", or 1") that matches your tubing. Securely attach it to the pump's outlet using one of the red screw nuts and an O-ring to ensure a watertight seal.



Gambar ieu nunjukkeun sisi profile of the Jebao DCW-1500 pump. A white hose barb adapter is securely fastened to the pump's red outlet, ready for a flexible hose connection. The clear housing allows a view of the blue impeller.

4. Sambungkeun Tubing: Connect your flexible tubing to the chosen hose adapter. Ensure the connection is tight to prevent leaks.
5. Pompa posisi:
   • For internal use: Place the pump at the bottom of your sump or tank, ensuring it is fully submerged. The pump has rubber feet for stability.
   • For external use: Position the pump on a stable, level surface. Ensure the inlet is connected to the water source and the outlet to your return line.



This image presents the Jebao DCW-1500 pump from a slightly elevated angle, showcasing the white intake screen on the left and the red outlet with a white hose adapter on the right. The pump's red base and white body are clearly visible, along with the power cable extending from the back.

6. Connect Controller and Power:
   • Connect the pump's cable to the controller.
   • Connect the AC adapter to the controller.
   • Plug the AC adapter into a suitable power outlet. The power cables are designed to be long, offering flexibility in placement.

6. Parentah Operasi

The Jebao DCW-1500 pump is controlled via its external controller, offering variable speed and a feed mode.

This image focuses on the red and white controller unit for the Jebao DCW-1500 pump. It features a series of blue LED lights indicating the current power level, along with three buttons: a minus (-) button to decrease speed, a plus (+) button to increase speed, and a "FEED" button to activate feed mode. The model number "DCW-1500" and "SINE Wave Technology" are printed on the controller.

• Hurungkeun/Pareuman: The pump will start automatically when plugged in. To turn off, unplug the power adapter.
• Nyaluyukeun Laju Aliran: Ngagunakeun éta + jeung - buttons on the controller to increase or decrease the pump's speed and flow rate. The LED indicators will show the current power level.
• Modeu eupan: Pencét éta FEED button to temporarily pause the pump for 10 minutes, allowing for feeding without water circulation. The "10min" indicator light will illuminate. The pump will automatically resume normal operation after 10 minutes. To exit feed mode manually, press the FEED tombol deui.
• Operasi sepi: The SINE wave technology ensures ultra-quiet operation. Even at higher flow rates, the pump is designed to produce minimal noise.

7. Pangropéa

Pangropéa rutin ngajamin kinerja optimal sareng umur panjang pompa anjeun.

• Ngabersihkeun Impeller: Periodically remove the intake screen and front cover to access the impeller. Clean any debris, algae, or mineral buildup from the impeller and its housing. The ceramic shaft is designed for durability and reduced wear.
• Pariksa sambungan: Regularly inspect all hose connections and O-rings for wear or damage. Replace if necessary to maintain a watertight seal.
• Inspeksi kabel listrik: Check the power cord and controller cable for any signs of damage. Do not operate the pump with damaged wiring.

8. Cara ngungkulan

If you encounter issues with your Jebao DCW-1500 pump, refer to the following common problems and solutions:

• Pompa teu ngamimitian:
  • Pastikeun adaptor kakuatan tos aman dicolokkeun kana stop kontak jalan.
  • Check all cable connections between the pump, controller, and power adapter.
  • Verify that the pump is receiving power (LEDs on controller should be lit).
• Reduced Flow Rate:
  • Check for blockages in the intake screen or impeller housing. Clean as described in the Maintenance section.
  • Pastikeun tabung henteu bengkok atanapi tersumbat.
  • Confirm the pump speed setting on the controller is at the desired level.
• Sora/Geteran Anu Ahéng:
  • Disconnect power and inspect the impeller for any foreign objects or damage.
  • Ensure the pump is placed on a stable surface and not vibrating against tank walls or other equipment.
• bocor cai:
  • Check all hose connections and ensure they are tight and properly sealed with O-rings and screw nuts.
  • Inspect tubing for cracks or damage.

9. Garansi jeung Rojongan

For warranty information or technical support, please refer to the contact details provided in the original product packaging or visit the official Jebao websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Jebao Co., Ltd.
Surélék: info@jebao.com
Websitus: http://www.jebao.com