WEN DPA2513 Bor Pencét Table Manual Instruksi

1. Bubuka

The WEN DPA2513 Drill Press Table is designed to enhance the functionality and workspace of your drill press. This accessory provides a spacious and stable surface for supporting larger workpieces, improving accuracy and safety during drilling operations. Its robust construction and adjustable features make it a valuable addition to any workshop.

Key features include a durable MDF table, integrated rulers, an adjustable fence, and a stop block for precise positioning. A removable insert allows for through-drilling without damaging the main table surface. The unique design ensures clearance for your drill press's height adjustment crank, facilitating easy vertical adjustments.

2. Émbaran Kasalametan

Always prioritize safety when operating power tools and accessories. Read and understand all instructions before use. Keep this manual for future reference.

• Nganggo panyalindungan panon: Always wear ANSI-approved safety goggles or a face shield when operating a drill press.
• Workpiece Aman: Salawasna clamp your workpiece securely to the drill press table to prevent rotation or movement during drilling. The included hold-down clamps are designed for this purpose.
• Hapus Wewengkon Gawé: Keep the work area clean and free of clutter. Remove any loose items that could interfere with operation.
• Pencahayaan anu leres: Ensure adequate lighting in your work area.
• Pariksa sateuacan dianggo: Before each use, inspect the drill press table and all components for damage or wear. Do not use if any parts are damaged.
• Ngajaga kasaimbangan: Ulah overreach. Ngajaga footing ditangtoskeun jeung kasaimbangan sepanjang waktos.
• Pegatkeun Daya: Always disconnect the drill press from the power source before making adjustments, changing accessories, or performing maintenance.

3. Eusi Paket

Pastikeun yén sadaya barang aya nalika ngabongkar:

• WEN DPA2513 bor Pencét Table
• Pager adjustable
• Eureun Blok
• Three Mounting Clamps
• Two Material Hold-Down Clamps
• Selapkeun removable

4. Setup jeung Instalasi

Follow these steps to properly install your WEN DPA2513 Drill Press Table:

1. Attach the Drill Press Table: Position the WEN DPA2513 table onto your existing drill press table. The universal design allows it to fit tables ranging from 4 to 22 inches in width. Align the table so that the drill bit will pass through the removable insert.
2. Secure with Mounting Clamps: Use the three included mounting clamps to firmly attach the WEN table to your drill press table. Tighten the clamps securely from underneath to prevent any movement during operation. Ensure the table is stable and level.

Figure 4.1: Mounting clamps securing the drill press table.

3. Install the Fence: Slide the adjustable fence into the T-slots on the drill press table. Position it as needed for your workpiece.
4. Attach the Stop Block: Insert the stop block into the T-slot on the fence. This allows for repeatable positioning of your workpiece.

Figure 4.2: Drill press table with fence and stop block installed.

The table's design provides clearance for the drill press's height adjustment crank, allowing for easy vertical adjustments without obstruction.

Figure 4.3: Clearance for height adjustment crank.

5. Operasi

Using the WEN DPA2513 Drill Press Table effectively:

1. Ngatur Posisi Benda Kerja: Place your workpiece on the table. Use the adjustable fence and stop block to accurately position the material for drilling. The onboard rulers assist in precise measurements.
2. Ngamankeun Benda Kerja: Utilize the two included material hold-down clamps to firmly secure your workpiece to the table. This prevents movement and ensures safety during drilling.
3. Using the Removable Insert: The central insert can be removed to allow the drill bit to pass completely through the workpiece without damaging the main table surface. This is particularly useful for through-holes.

Figure 5.1: Utilizing the removable insert for through-drilling.

6. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your drill press table:

• beberesih: After each use, wipe down the table surface to remove dust, chips, and debris. A damp lawon bisa dipaké, dituturkeun ku lawon garing.
• Pamariksaan: Periodically check all fasteners, including mounting clamps and fence knobs, to ensure they are tight.
• Panyimpenan: Store the drill press table in a dry environment to prevent moisture damage to the MDF.

7. Cara ngungkulan

If you encounter issues with your drill press table, consider the following:

• Méja guligah: Ensure all three mounting clamps are securely tightened to your drill press table. Check that your drill press table itself is stable.
• Fence Not Square: Verify that the fence is properly seated in the T-slots and that its locking knobs are tightened. Use a reliable square to check its alignment against the drill bit. Adjust as necessary.
• Gerakan Benda Kerja: Always use the material hold-down clamps to secure your workpiece. Ensure the clamps are tightened sufficiently for the material being drilled.

8. Spésifikasi

9. Garansi jeung Rojongan

For detailed warranty information and customer support, please refer to the official WEN website or contact WEN customer service directly. Keep your purchase receipt for warranty claims.