1. Produk Langkungview
The JBC Tools CD-2SQF is a high-performance digital soldering station designed for professional use. It offers precise temperature control and rapid heat-up, making it suitable for a wide range of soldering applications. This manual provides essential information for the safe and efficient operation of your soldering station.
Gambar 1: JBC Tools CD-2SQF Digital Soldering Station. This image shows the compact soldering station with its integrated stand, cleaning accessories (brass wool and sponge), and the connected T210 soldering iron. The station features a digital display showing temperature and power, along with control buttons.
Eusi pakét:
- Unit Kontrol CD
- T210 Soldering Iron (tip not included)
- CL6210 Kuningan Wol
- S0354 bolu
- Colokkeun Daya
- Manual pamaké
2. Parentah Setup
Ngabongkar bungkusan: Carefully remove all components from the packaging. Inspect for any signs of damage during transit. Retain packaging for future storage or transport.
panempatan: Place the CD-2SQF control unit on a stable, level, and heat-resistant surface. Ensure adequate ventilation around the unit.
Sambungkeun Besi Solder: Connect the T210 soldering iron cable to the designated port on the front of the CD control unit. Ensure the connection is secure.
Prepare Cleaning Station:
- Insert the CL6210 brass wool into its designated compartment on the station.
- Moisten the S0354 sponge with clean water and place it in its compartment. The sponge should be damp, teu baseuh.
Sambungan Daya: Connect the power plug to the power input on the rear of the CD control unit. Then, plug the power cord into a grounded electrical outlet (230V AC, 50/60Hz).
Daya mimiti Hurung: Press the power button on the unit. The LED display will illuminate, indicating the station is ready for operation.
3. Operating the Soldering Station
3.1. Operasi dasar
Hurungkeun/Pareuman: Press the power button to turn the station on or off. The display will show the current temperature and power status.
Penyesuaian Suhu: Ngagunakeun éta UP jeung TURUN arrow buttons on the control unit to adjust the desired soldering temperature. The temperature range is 90-450 °C.
Tip beberesih: Regularly clean the soldering iron tip using the brass wool or the damp sponge. This removes excess solder and oxidation, ensuring optimal performance and tip longevity.
Solder: Apply the soldering iron tip to the joint to be soldered, then feed solder onto the heated joint. Ensure proper wetting and flow of the solder.
Modeu Siaga: When the soldering iron is placed in its stand, the station automatically enters standby mode, reducing the tip temperature to prolong its life and save energy.
3.2. Advanced Features (Refer to full manual for details)
- Napigasi Menu: Ngagunakeun éta MENU button to access advanced settings such as temperature presets, sleep mode settings, and unit calibration.
- Perlindungan PIN: The station may feature a PIN protection option to prevent unauthorized temperature changes.
- Pembaruan firmware: JBC may release firmware updates for enhanced functionality. Consult the official JBC websitus pikeun paréntah.
4. Pangropéa sarta perawatan
Regular maintenance ensures the longevity and optimal performance of your JBC CD-2SQF soldering station.
Tip Pangropéa: Always tin the soldering iron tip with a small amount of solder before storing it or turning off the station. This prevents oxidation.
Cleaning the Station:
- Wipe the control unit and stand with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Periodically replace the brass wool and sponge as they wear out or become excessively dirty.
Pamariksaan kabel: Regularly inspect the soldering iron cable and power cord for any signs of damage, fraying, or kinks. Replace damaged cables immediately.
Panyimpenan: When not in use for extended periods, disconnect the station from power and store it in a clean, dry environment.
5. Cara ngungkulan
This section addresses common issues you might encounter with your soldering station.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Stasion teu hurung. | Taya catu daya; kabel kakuatan faulty; sekering internal ditiup. | Check power connection and outlet. Inspect power cord for damage. If fuse is suspected, contact authorized service. |
| Beusi solder teu panas. | Soldering iron not properly connected; faulty heating element/tip; station in standby/sleep mode. | Ensure iron is securely connected. Check if the station is in standby (remove iron from stand). Replace tip if necessary. Contact service if problem persists. |
| tampilan suhu nembongkeun kasalahan. | Sensor malfunction; connection issue. | Turn off and restart the station. Check iron connection. If error persists, contact JBC support. |
| Poor solder joint quality. | Incorrect temperature; dirty/oxidized tip; improper soldering technique. | Adjust temperature. Clean and tin the tip. Review soldering technique. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact JBC customer support or an authorized service center.
6. Spésifikasi Téknis
| Modél | CD-2SQF |
| merek | JBC |
| Kakuatan | 40 Watt |
| Voltage | 230 volt |
| Rentang Suhu | 90 - 450 °C (194 - 842 °F) |
| Stabilitas Suhu | ± 1.5 °C (±3 °F) |
| Ukuran (L x W x H) | 11 x 19 x 15 cm (4.3 x 7.5 x 5.9 inci) |
| Beurat | 3.51 kg (7.74 lbs) |
| Tipe tampilan | LED |
| Bahan | palastik |
7. Garansi jeung Rojongan
JBC products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official JBC websitus atanapi ngahubungan distributor lokal Anjeun.
Sumberdaya Online: www.jbctools.com
Palayanan palanggan: Refer to the contact information provided on the JBC websitus pikeun wewengkon Anjeun.
