Feit Electric WORK2000 2000 Lumens Rechargeable Portable LED Work Light Instruction Manual

1. Émbaran Kasalametan

Mangga baca sareng ngartos sadaya parentah kaamanan sateuacan nganggo produk ieu. Gagalna nuturkeun parentah ieu bisa ngakibatkeun shock listrik, seuneu, atawa tatu serius.

• PERHATOSAN: These LED lights are extremely bright. Never point toward your eyes or people around you. Do not point at moving vehicles or aircraft.
• Kaduruk Bahaya: Do not touch the lens when the light is on or immediately after use, as it may be hot.
• Jauhkeun lampu gawé tina bahan anu gampang kaduruk.
• Do not immerse the unit in water. This product is UL wet rated, meaning it can withstand wet conditions, but it is not submersible.
• Do not attempt to disassemble, repair, or modify the unit. Contact qualified service personnel for repairs.
• Ensure the charging cable and port are dry before connecting to power.
• Operating temperature range: 32°F to 113°F (0°C to 45°C). Discharge temperature range: -4°F to 113°F (-20°C to 45°C).

Image: Control panel with safety warning and operational details.

2. Produk Langkungview

The Feit Electric WORK2000 is a durable, rechargeable, and portable LED work light designed for various applications. It features a robust cast metal housing and is UL wet rated for both indoor and outdoor use.

Fitur konci:

• Cahaya Ultra Caang: Outputs up to 2000 lumens of 6500K Daylight color temperature light.
• Kacaangan adjustable: Five preset lighting levels (2000, 1600, 1200, 750, or 350 lumens).
• Batré anu tiasa dicas deui: Integrated lithium-ion battery provides up to 10 hours of continual light at the lowest setting.
• Bank Daya USB: Fitur 1 AMP USB port to charge external devices like smartphones.
• Desain portabel: Attached foldable handle allows for easy transport and setup on various surfaces.
• Indikator batré: Built-in indicator displays the current battery level.

Gambar: Hareupeun view of the WORK2000 portable LED work light.

Image: Product packaging illustrating key features and design.

3. Setélan

Charging the Work Light:

1. Locate the charging port on the control panel of the work light.
2. Connect the included charging cable to the work light's charging port.
3. Plug the other end of the charging cable into a compatible USB power adapter (not included) or a USB power source.
4. The battery level indicator lights will illuminate to show charging progress. The indicator will blink while charging.
5. A full charge typically takes several hours. The indicator lights will show a solid charge when complete.

Catetan: The battery level indicator will blink while charging. Charging time will be longer while the light is in use.

Image: Control panel detailing the charging port and battery indicator.

4. Parentah Operasi

Hurungkeun/Pareuman:

• Press the power button (labeled '1' on the control panel image) to turn the work light on or off.

Nyaluyukeun Caang:

• Use the brightness adjustment buttons (labeled '2' on the control panel image, '+' for increase, '-' for decrease) to cycle through the five brightness levels.
• Available brightness levels and approximate run times:

Ngagunakeun salaku Power Bank:

• The work light includes a 1 AMP USB output port (labeled '5V1A' on the control panel image).
• Connect your USB-powered device (e.g., smartphone) to this port using its charging cable to utilize the work light as a portable power bank.

Indikator Tingkat Batré:

• The battery level indicator (labeled '3' on the control panel image) shows the remaining charge:

• Four solid lights: 80% - 100% charge
• Three solid lights: 60% - 79% charge
• Two solid lights: 20% - 59% charge
• One solid light: 1% - 19% charge

Foldable Handle and Stand:

• The integrated handle can be folded to serve as a stand, allowing you to position the light at various angles for optimal illumination.
• The handle also facilitates easy carrying of the work light.

Image: Work light in use, providing illumination for electrical work.

Image: Work light in use, providing illumination for mechanical work.

5. Pangropéa

beberesih:

• Ensure the work light is turned off and unplugged before cleaning.
• Ngusap permukaan luar kalayan lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Avoid getting moisture into the charging port or USB output port.

Panyimpenan:

• Simpen lampu kerja di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• For prolonged storage, it is recommended to charge the battery periodically (e.g., every 3-6 months) to maintain battery health.

6. Cara ngungkulan

• Lampu teu hurung: Ensure the battery is charged. If the battery is low, connect the charging cable and allow it to charge.
• Lampu henteu ngeusi batre: Verify that the charging cable is securely connected to both the work light and the power source. Check if the power source is active. Ensure the charging port is clean and free of debris.
• Short run time: Battery run time varies significantly with brightness level. Ensure the light is fully charged. Battery performance may decrease over time with repeated use and charging cycles.
• USB power bank not charging devices: Ensure the work light has sufficient battery charge. Check the connection between the device and the USB output port.

If you experience issues not covered here, please refer to the support section for assistance.

7. Spésifikasi

Gambar: Diagram diménsi produk.

Image: Manufacturer's detailed specifications sheet.

8. Émbaran jaminan

The Feit Electric WORK2000 Rechargeable Portable LED Work Light comes with a 1-taun jaminan kawates ti tanggal pameseran. Garansi ieu ngawengku cacad dina bahan sareng padamelan dina panggunaan normal. Pikeun klaim garansi atanapi langkung rinci, mangga ngahubungi dukungan palanggan Feit Electric.

9. Rojongan

For 24/7 customer support, troubleshooting assistance, or any product-related inquiries, please visit the official Feit Electric help center:

Nganjang ka Pusat Pitulung Feit Electric

Image: Customer support contact information.