Manual Instruksi Alat Ukur & Termometer Kelembapan AcuRite Pro kalayan Lampu Latar Aktif Toél (Modél 01139M)

1. Bubuka

The AcuRite Pro Humidity Meter & Thermometer with Touch Activated Backlight (Model 01139M) is designed to provide accurate measurements of indoor temperature and humidity. This device helps you monitor environmental conditions to ensure comfort and protect sensitive items.

Fitur konci:

• Akurasi ditingkatkeun: Detects changes in temperature and humidity every 10 seconds.
• Fungsi lampu tukang: Gampang view temperature & humidity levels at any time, day or night, with a touch-activated backlight.
• Sababaraha Pilihan Pasang: Features a tabletop stand and magnet-mountable design for versatile placement.
• Responsive Readings: Indicates current air conditions to ensure proper humidity control.
• Record High and Lows: Displays 24-hour and all-time record high and low readings.
• Area-Specific Monitoring: Calibrate the sensor to each room or environment for accurate data.

2. Setélan

2.1. Pamasangan batré

1. Tangtukeun lokasi kompartemen batré dina tonggong unit.
2. Cabut panutup kompartemen batré.
3. Insert 2 AA batteries (not included) into the compartment, ensuring correct polarity (+ and -).
4. Ganti panutup kompartemen batré.

2.2. Mimiti Power-Up

Once batteries are installed, the unit will power on automatically and begin displaying current temperature and humidity readings. Allow a few minutes for the sensor to stabilize and provide accurate readings.

3. Parentah Operasi

3.1. Témbongkeun Leuwihview

The large, easy-to-read display shows:

• Current Humidity (%)
• Current Temperature (°F or °C)
• 24-hour High/Low Humidity and Temperature records
• All-time High/Low Humidity and Temperature records
• Humidity Level Indicator (LOW, OK, HIGH)
• Trend Arrows for Humidity and Temperature

3.2. Touch-Activated Backlight

To activate the backlight, gently touch the top edge of the unit where indicated by the "touch light" icon. The backlight will illuminate for approximately 10 seconds, allowing for easy viewdina kaayaan cahaya remen.

3.3. Switching Temperature Units (°F/°C)

To switch between Fahrenheit (°F) and Celsius (°C), locate the "°F/°C" button on the back of the unit (refer to Figure 2). Press this button to toggle between the two temperature units.

3.4. Clearing High/Low Records

To clear the 24-hour high and low records, press and hold the "CLEAR" button on the back of the unit for a few seconds. All-time records are typically reset only upon battery removal or factory reset.

4. Pilihan Pamasangan

The AcuRite Pro Humidity Meter & Thermometer offers flexible placement options:

• Tabletop: Use the integrated kickstand on the back of the unit to place it on any flat surface.
• Magnet-Mountable: The unit features magnets on its back, allowing it to be securely attached to metallic surfaces like refrigerators or metal doors.

5. Pangropéa

5.1. Ngagantian batré

When the battery indicator appears on the display, it is time to replace the batteries. Follow the battery installation steps (Section 2.1) to replace the 2 AA batteries. Replacing batteries will reset 24-hour high/low records.

5.2. beberesih

Ngusap unit kalayan lemes, damp lawon. Ulah nganggo pembersih atanapi pelarut anu abrasif, sabab ieu tiasa ngaruksak tampilan atanapiasing.

6. Cara ngungkulan

6.1. Bacaan Teu Tepat

• Ensure the unit is placed in a location away from direct sunlight, heat sources, or drafts, which can affect accuracy.
• Allow the unit to stabilize for at least 20 minutes after initial setup or relocation.
• Replace batteries if the low battery indicator is displayed.

6.2. Layar Teu Jalan

• Check battery orientation and ensure they are inserted correctly.
• Ganti ku aki-aki anu seger.
• Upami masalahna tetep, hubungi dukungan palanggan.

7. Spésifikasi

8. Naon dina Box

• AcuRite Pro Humidity Meter & Thermometer
• Instruksi Manual

9. Garansi jeung Rojongan

For warranty information, technical support, or to register your product, please visit the official AcuRite website or contact their customer service directly. Specific warranty details may vary and are typically provided with the product packaging or on the manufacturer's websitus.