Bubuka
This manual provides instructions for the safe and effective use of your THERMOS Stainless King 40 Ounce Vacuum-Insulated Beverage Bottle. Designed for maximum temperature retention, this bottle keeps beverages hot or cold for up to 24 hours, making it ideal for outdoor activities, travel, and daily use.
Image: The THERMOS Stainless King 40 Ounce Vacuum-Insulated Beverage Bottle in Rustic Red.
Fitur produk
- Téhnologi Insulasi Vakum: Ensures maximum temperature retention, keeping beverages hot or cold for up to 24 hours.
- Konstruksi awét: Made from high-quality 18/8 stainless steel for long-lasting use.
- Built-in Serving Cup: The lid doubles as a convenient serving cup.
- Twist and Pour Stopper: Allows for pouring without fully removing the stopper, minimizing heat loss and preventing spills.
- Gagang Mawa Terpadu: Pikeun gampang angkot.
- Sweat-Proof Exterior: Stays cool to the touch with hot liquids and sweat-proof with cold.
- Bahan Bébas BPA: Ensures safety for all beverages.
Gambar: Detil view of the bottle's features, including the Twist and Pour stopper, BPA-Free materials, and 18/8 high-quality stainless steel construction.
Setup jeung pamakéan munggaran
- Ngabongkar: Remove all packaging materials and labels from the beverage bottle.
- Bersihan awal: Before first use, wash all parts (bottle, stopper, and serving cup) thoroughly with warm, soapy water. Rinse completely and allow to air dry.
- Pre-Conditioning for Hot Beverages: For maximum heat retention, pre-heat the bottle by filling it with hot water (not boiling) for 5-10 minutes. Empty the hot water before adding your desired hot beverage.
- Pre-Conditioning for Cold Beverages: For maximum cold retention, pre-chill the bottle by filling it with cold water for 5-10 minutes. Empty the cold water before adding your desired cold beverage.
Parentah Operasi
Ngeusian Botol
- Unscrew and remove the serving cup (outer lid).
- Unscrew the twist and pour stopper completely to open the bottle.
- Fill the bottle with your desired hot or cold beverage. Do not overfill; leave space for the stopper.
- Securely screw the twist and pour stopper back onto the bottle.
- Screw the serving cup back onto the bottle until tight.
Pouring Beverages
- Unscrew and remove the serving cup.
- Slightly twist the inner stopper counter-clockwise until you hear a click or feel it loosen. This opens the pour channel.
- Tilt the bottle to pour the beverage into the serving cup or another container.
- After pouring, twist the inner stopper clockwise to seal it tightly.
- Replace the serving cup.
Image: Demonstrates the ease of pouring a beverage into the integrated serving cup.
Pangropéa jeung beberesih
Proper cleaning and maintenance will ensure the longevity and performance of your THERMOS Stainless King bottle.
- Wawasuh panangan hungkul: The manufacturer recommends hand washing for all parts of the bottle. Do not place in a dishwasher.
- Prosedur beberesih:
- Disassemble the bottle by removing the serving cup and the twist and pour stopper.
- Wash all components with warm water and mild dish soap. Use a bottle brush for the interior of the bottle.
- Bilas sacara saksama pikeun miceun sadaya résidu sabun.
- Ngidinan sadaya bagian ka hawa garing lengkep sateuacan reassembling atanapi nyimpen.
- Hindarkeun abrasive: Do not use abrasive cleaners, scrubbers, or bleach, as these can damage the finish and seals.
- Ngabersihan rutin: Clean the bottle after each use, especially when storing for extended periods, to prevent odors and bacterial growth.
Image: The twist and pour stopper disassembled for thorough cleaning.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Beverage not staying hot/cold for 24 hours | Bottle not pre-conditioned; stopper not sealed properly; damaged vacuum seal. | Pre-condition the bottle with hot/cold water before use. Ensure the stopper is twisted tightly. If the issue persists, the vacuum insulation may be compromised. |
| Bébas | Stopper not sealed properly; damaged gasket/seal. | Ensure the twist and pour stopper is fully closed. Check the silicone gaskets for wear or damage and replace if necessary. |
| Bau/rasa anu teu pikaresepeun | Inadequate cleaning; residue buildup. | Clean all parts thoroughly with warm, soapy water and rinse well. For stubborn odors, a mixture of baking soda and water can be used, followed by thorough rinsing. |
spésifikasi
- merek: TERMOS
- Ngaran modél: Stainless King 40 Ounce Beverage Bottle
- Jumlah modél: SK2010
- Kapasitas: 40 Ounce (approximately 1.2 Liters)
- warna: Rustic Red
- Bahan: 18/8 stainless steel
- Ukuran produk: Approximately 1"W x 1"H (Note: This dimension seems incorrect from the source, typically bottles are taller than wide. Refer to product image for visual scale.)
- Beurat barang: 16 ons (1 pon)
- Parentah perawatan: Wawasuh panangan hungkul
- Fitur husus: Enteng
Image: The beverage bottle with its approximate height (12.3 inches) and base diameter (3.7 inches) indicated.
Garansi sareng Rojongan
This THERMOS Stainless King Beverage Bottle comes with a limited 5-year manufacturer's warranty.
For warranty claims, product support, or additional information, please visit the official THERMOS websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen bukti pameseran anjeun pikeun validasi jaminan.
You can visit the THERMOS Store for more products and information: THERMOS Store on Amazon.
