Tembok LED Artemide Cadmo Lamp (Modél 1373028A) Buku Panduan Pangguna

1. Bubuka

This manual provides detailed instructions for the safe and efficient use of your Artemide Cadmo LED Wall Lamp, Model 1373028A. Please read this manual thoroughly before installation and operation, and retain it for future reference. This product is designed for indoor use only.

Inpormasi Kaamanan Penting: Always disconnect power before installation, maintenance, or bulb replacement. Installation should be performed by a qualified electrician in accordance with local electrical codes.

2. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Tembok LED Artemide Cadmo Lamp fixture
• Hardware pemasangan (screws, jangkar témbok)
• Manual Pitunjuk (dokumén ieu)
• Note: GU10 LED bulbs are not included and must be purchased separately.

3. Spésifikasi produk

4. Instalasi jeung Setup

Sateuacan Anjeun Ngawitan: Ensure the power supply to the installation area is turned off at the circuit breaker. Consult a qualified electrician if you are unsure about any steps.

4.1 Pakakas Diperlukeun

• Obeng (Phillips jeung/atawa Flathead)
• Striper kawat
• Pita listrik
• Drill (if wall anchors are needed)
• Pensil
• Tingkat

4.2 Masangkeun fixture

1. Pareuman Daya: Locate the circuit breaker controlling the light switch for the installation area and turn it off. Verify power is off using a voltage panguji.
2. Nyiapkeun Permukaan Pemasangan: Mark the desired mounting location on the wall. Ensure it is structurally sound and can support the fixture's weight.
3. Pasang Bracket Pasang: Attach the fixture's mounting bracket to the wall using the provided screws and wall anchors (if necessary). Use a level to ensure it is straight.
4. Sambungan listrik: Carefully connect the electrical wires from the wall to the fixture's wires.
   • Connect the live (black) wire from the wall to the live wire of the fixture.
   • Connect the neutral (white) wire from the wall to the neutral wire of the fixture.
   • Connect the ground (green or bare copper) wire from the wall to the ground wire of the fixture.
   Amankeun sadaya sambungan nganggo kacang kawat sareng pita listrik.
5. Perlengkapan Aman: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure no wires are pinched.

4.3 Installing GU10 LED Bulbs

The Artemide Cadmo lamp requires two GU10 LED bulbs (not included). Ensure the bulbs are rated for 120V and do not exceed 10W each.

1. Gently insert the GU10 bulb into the socket.
2. Puterkeun bohlam searah jarum jam nepi ka pageuh dipasang dina stop kontak.
3. Repeat for the second bulb.

Figure 1: Artemide Cadmo LED Wall Lamp installed, showcasing its upward and downward light emission.

5. Parentah Operasi

After successful installation and bulb insertion, you can operate your Artemide Cadmo LED Wall Lamp.

5.1 Hurungkeun / Pareum

Restore power at the circuit breaker. Use the wall switch connected to the fixture to turn the lamp hurung atawa pareum.

5.2 Dimming Fungsionalitas

This fixture supports 2-wire dimming. If connected to a compatible dimmer switch, you can adjust the light intensity. Ensure your dimmer switch is suitable for LED lighting.

Anu lamp is also compatible with App and Remote Control methods for dimming, provided the appropriate smart home system and GU10 smart bulbs are used.

6. Perawatan sareng Pangropéa

Regular maintenance ensures the longevity and optimal performance of your Artemide Cadmo LED Wall Lamp.

6.1 beberesih

• Pareuman listrik salawasna to the fixture before cleaning.
• Lap permukaan luar ku kaén nu lemes, garing, atawa rada garingamp lawon.
• Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
• Pastikeun fixture tos rengse garing saméméh malikkeun kakuatan.

6.2 Bohlam ngagantian

When a GU10 LED bulb reaches the end of its life:

1. Pareuman kakuatan dina pemutus sirkuit.
2. Keun bohlamna tiis sagemblengna upami nembe dianggo.
3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
4. Selapkeun bohlam LED GU10 anyar (max 10W) ku aligning pin na twisting saarah jarum jam nepi ka aman.
5. Balikkeun kakuatan dina circuit breaker.

Gambar 2: Sisi profile of the Artemide Cadmo LED Wall Lamp, illustrating its sleek design.

7. Cara ngungkulan

If you encounter issues with your Artemide Cadmo LED Wall Lamp, tingal masalah umum sareng solusi ieu:

If these steps do not resolve the issue, please contact Artemide customer support or a qualified electrician.

8. Garansi jeung Rojongan

For information regarding the product warranty, please refer to the documentation provided at the time of purchase or visit the official Artemide websitus. Sarat jeung kaayaan jaminan bisa rupa-rupa dumasar wewengkon sarta pangecér.

For technical support, replacement parts, or further assistance, please contact Artemide customer service directly. Contact information can typically be found on the manufacturer's websitus atanapi bungkusan produk.

Resmi Artemide Websitus: www.artemide.com