Artemide La Petite Lantai Lamp Model 1753028A User Manual

1. Bubuka

This manual provides essential instructions for the safe and efficient use of your Artemide La Petite Floor Lamp, Model 1753028A. The La Petite lamp features an archetypal lampshade balanced on a tilted stem, showcasing a geometric design with advanced materials. Please read this manual thoroughly before assembly and operation, and retain it for future reference.

2. Parentah Kasalametan

• Ensure the power supply is disconnected before assembly, cleaning, or bulb replacement.
• Ieu lamp dirancang kanggo dianggo di jero rohangan hungkul. Ulah kakeunaan ka lembab atanapi suhu anu ekstrim.
• Use only LED-T (Non Integrated) E26/A19 bulbs with a maximum power of 12W. Using incorrect bulb types or wattages may damage the lamp atanapi pasang aksi bahaya seuneu.
• Ulah ngaropéa lamp or its components. Any modifications will void the warranty and may compromise safety.
• Tetep lamp jauh tina bahan anu gampang kaduruk.
• Lamun kabel fléksibel éksternal atawa ari luminaire ieu ruksak, eta kudu diganti sacara éksklusif ku produsén atawa agén jasa na atawa jalma mumpuni sarupa pikeun nyegah bahaya.

3. Eusi Paket

Pastikeun yén sadaya komponén aya sareng henteu ruksak sateuacan neraskeun perakitan.

• Lamp Dasar
• Lamp Stem (tilted)
• Lampshade (technopolymer)
• Diffuser (polycarbonate)
• Power Cord with On/Off Switch
• Assembly Hardware (if applicable)

Figure 1: Artemide La Petite Floor Lamp (representative model)

4. Setup jeung Majelis

Follow these steps to assemble your La Petite Floor Lamp:

1. Sacara saksama ngabongkar sadaya komponén tina bungkusan.
2. Gantelkeun lamp stem to the lamp base. Ensure it is securely fastened according to the provided hardware (if any).
3. Pasang lampshade onto the top of the stem. The lampshade is made of lightweight technopolymer and should fit snugly.
4. Insert the polycarbonate diffuser into the lampngiuhan.
5. Screw in an E26/A19 LED-T bulb (max 12W) into the lamp panyekel. Ulah overighten.
6. Posisi lamp dina permukaan anu stabil, datar.
7. Colokkeun kabel listrik kana stop kontak 120V standar.

5. Parentah Operasi

The Artemide La Petite Floor Lamp is equipped with an on/off switch located on the power cord.

• Pikeun ngahurungkeun lamp ON, locate the switch on the power cord and toggle it to the 'ON' position.
• Pikeun ngahurungkeun lamp Pareum, toggle the switch to the 'OFF' position.

6. Pangropéa

beberesih

• Sok pegatkeun sambungan lamp ti catu daya saméméh beberesih.
• Ngusap lamp base, stem, and shade with a soft, dry, or slightly damp lawon.
• Ulah make cleaners abrasive, pangleyur, atawa bahan kimia kasar, sabab ieu bisa ngaruksak finish.

Ngagantian bohlam

• Pastikeun lamp geus unplugged tur bohlam geus tiis sagemblengna saméméh nyoba ngaganti eta.
• Cabut bohlam lami tina stop kontak E26 kalayan ati-ati.
• Screw in a new E26/A19 LED-T bulb (max 12W).
• Miceun bohlam heubeul nurutkeun peraturan lokal.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

Artemide products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Artemide website. For technical support, replacement parts, or service inquiries, please contact Artemide customer service through their official channels.

Websitus: www.artemide.com