SHARKOON Elite Shark CA300T Extended ATX PC Case User Manual

1. Bubuka

This manual provides comprehensive instructions for the SHARKOON Elite Shark CA300T Extended ATX PC Case. It covers the product's features, setup procedures, operational guidelines, maintenance tips, troubleshooting solutions, and detailed technical specifications. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your PC case.

2. Fitur konci

• Desain futuristik: The CA300T features an expressive front panel with a geometric pattern, framed by brushed aluminum, giving it a distinctive and modern aesthetic.
• Aliran Udara Lanjutan: Equipped with three pre-installed 120mm RGB LED fans at the front and one at the rear, ensuring consistent airflow. The front panel includes a mesh grille for optimal ventilation, and the top panel offers a perforated cover for additional fan/radiator mounting.
• Illuminated I/O Panel: The side-mounted I/O panel includes standard audio ports, USB 3.0 ports, and a USB-C port, all featuring their own RGB illumination.
• Panel Kaca Tempered: Two tempered glass side panels provide a clear view of internal components. The right-side panel is partially tinted to conceal the power supply tunnel while highlighting SSDs or HDDs.
• Interior lega: Designed to accommodate large components, including graphics cards up to 42.5 cm, power supplies up to 24 cm, and CPU coolers up to 16.5 cm.
• Manajemén Kabel Éfisién: Features a spacious, foldable cable compartment and a sliding cable cover to keep wiring organized and out of sight.
• Pilihan Panyimpenan: Supports up to seven 2.5-inch drives or four 3.5-inch drives.

3. Eusi Paket

The SHARKOON Elite Shark CA300T PC Case package typically includes:

• SHARKOON Elite Shark CA300T PC Case (White)
• Pre-installed 120mm RGB LED Fans (3x Front, 1x Rear)
• Kotak asesoris (sekrup, beungkeut kabel, standoff, jsb.)
• Manual pangguna (dokumén ieu)

Note: Specific contents may vary slightly. Please check the packaging for a complete list.

4. Parentah Setup

Follow these steps to set up your SHARKOON Elite Shark CA300T PC case and install your components.

4.1. Nyiapkeun Kasus

1. Bongkarkeun Koperna: Kaluarkeun wadah PC tina bungkusna kalayan ati-ati.
2. Leupaskeun Panel Sisi: Unscrew the thumbscrews on the rear of the case for both tempered glass side panels. Gently slide and lift the panels to remove them. Place them on a soft, flat surface to prevent scratches.
3. Kotak aksésori: Panggihan kotak asesoris di jero wadahna, anu ngandung sadaya sekrup sareng perangkat keras anu diperyogikeun.

4.2. Pamasangan motherboard

1. Pasang Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, SSI EEB). The case typically has pre-installed standoffs for standard ATX.
2. Pasang I/O Shield: If your motherboard requires an external I/O shield, install it into the rear opening of the case before mounting the motherboard.
3. Gunung Motherboard: Carefully place your motherboard onto the standoffs, aligning the screw holes. Secure the motherboard with the provided screws.

4.3. Pamasangan Power Supply Unit (PSU).

1. Posisi PSU: The PSU mounts at the rear bottom of the case. Slide your PSU into the designated compartment from the rear.
2. PSU anu aman: Align the PSU with the screw holes and secure it with the provided screws from the rear of the case.
3. Manajemén Kabel: Route PSU cables through the cutouts to the back of the motherboard tray for organized cable management.

4.4. Panyimpenan Girang Instalasi

The CA300T supports various drive configurations:

• Drive 2.5 inci (SSD): Mount SSDs to the dedicated brackets behind the motherboard tray or within the PSU shroud.
• Drive (HDD) 3.5 inci: Install HDDs into the drive cages located under the PSU shroud.

4.5. Pamasangan Kartu Grafis sareng Kartu Ékspansi

1. Leupaskeun panutup slot: Leupaskeun panutup slot ékspansi perlu ti pungkur kasus.
2. Kartu Pasang: Selapkeun kartu grafik Anjeun atawa kartu ékspansi séjén kana liang PCIe luyu dina motherboard nu.
3. Kartu Aman: Ngamankeun kartu jeung screws disadiakeun.

4.6. Nyambungkeun Kabel Panel Hareup

Connect the front panel cables (USB 3.0, USB-C, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

4.7. Majelis ahir

1. Manajemén Kabel: Use the cable ties and routing channels to organize all internal cables behind the motherboard tray.
2. Pasang deui Panel Samping: Carefully reattach both tempered glass side panels and secure them with the thumbscrews.

Gambar 1: Interior view of the CA300T, highlighting component space.

5. Parentah Operasi

5.1. Powering Dina Sistim anjeun

After all components are installed and cables are connected, plug your power supply into a wall outlet and flip the PSU's power switch to the 'ON' position. Press the power button on the case's front I/O panel to start your computer.

5.2. RGB Lighting Control

The pre-installed RGB fans and illuminated I/O panel can be controlled via your motherboard's RGB software (if compatible) or a dedicated RGB controller if included with your motherboard or purchased separately. Refer to your motherboard manual for specific RGB header locations and software instructions.

Figure 2: The CA300T with its illuminated RGB fans and distinctive front panel.

6. Pangropéa

Pangropéa rutin ngabantosan mastikeun kinerja anu optimal sareng manjangkeun umur komponén PC anjeun.

6.1. Lebu Filter beberesih

The CA300T includes magnetic dust filters. It is recommended to clean these filters every 1-3 months, depending on your environment, to maintain optimal airflow and prevent dust buildup inside the case.

1. Locate Filters: Identify the dust filters on the top, front, and bottom of the case.
2. Hapus saringan: Gently pull or slide out the magnetic dust filters.
3. Saringan bersih: Use a soft brush, vacuum cleaner, or rinse with water (ensure completely dry before reinstallation) to remove accumulated dust.
4. Pasang deui saringan: Place the clean filters back into their respective positions.

6.2. beberesih umum

For external surfaces, use a soft, damp cloth to wipe down the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.

Gambar 3: Top view of the CA300T, showing the perforated top panel.

7. Cara ngungkulan

Bagian ieu alamat masalah umum Anjeun bisa sapatemon salila setelan atawa operasi.

7.1. Sistem Teu Bisa Dihurungkeun

• Pariksa PSU: Ensure the power supply unit is properly connected to the wall outlet and the PSU's power switch is in the 'ON' position.
• Sambungan Panel hareup: Verify that the power switch cable from the case's front panel is correctly connected to the motherboard's power header.
• Internal Power Cables: Confirm that all necessary power cables (24-pin ATX, CPU 8-pin, GPU PCIe) are securely connected to the motherboard and components.

7.2. Fans Not Spinning / RGB Not Lighting Up

• Sambungan Kipas: Ensure all fan power cables are securely connected to the motherboard's fan headers or a fan controller.
• Sambungan RGB: Verify that RGB cables are correctly connected to the motherboard's RGB headers or a dedicated RGB controller.
• Software/Controller: Check your motherboard's BIOS/UEFI settings or RGB software to ensure fans and RGB lighting are enabled and configured correctly.

7.3. Port USB Teu Fungsional

• Header USB Internal: Confirm that the internal USB 3.0 and USB-C cables from the case's front panel are securely connected to the corresponding headers on your motherboard.
• Motherboard Drivers: Ensure all necessary motherboard chipset and USB drivers are installed.

8. Spésifikasi Téknis

9. Garansi jeung Rojongan

9.1. Garansi produk

The SHARKOON Elite Shark CA300T PC Case comes with a garansi 2 taun on spare parts. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2. Apdet parangkat lunak

Software updates, if applicable for any integrated components or controllers, are guaranteed until 13 April 2030.

9.3. Rojongan Palanggan

For technical assistance, warranty claims, or further inquiries, please contact Sharkoon customer support through their official website or the retailer where the product was purchased. Have your product model and proof of purchase ready when contacting support.