Jandy R0693900 TruClear Salt Cell Assembly Instruction Manual

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Jandy R0693900 TruClear Salt Cell Assembly. Please read this manual thoroughly before attempting any procedures to ensure safe and efficient use of the product.

2. Émbaran Kasalametan penting

• Always disconnect power to the pool equipment at the main breaker before performing any service or maintenance.
• Wear appropriate personal protective equipment, including safety glasses and gloves, when handling pool chemicals or performing maintenance.
• Do not use undiluted muriatic acid for cleaning the salt cell, as this can cause severe damage to the cell and void the warranty. Always follow manufacturer guidelines for chemical dilution and handling.
• Pastikeun sadaya sambungan pipa ledeng pageuh sareng kedap cai pikeun nyegah bocor.

3. Produk Langkungview

The Jandy R0693900 TruClear Salt Cell Assembly is a replacement component for Jandy Pro Series TruClear Chlorinators, designed to generate chlorine for your pool from salt. This assembly includes the cell and its integrated power cable.

Figure 1: Jandy R0693900 TruClear Salt Cell Assembly, showing the cell body and coiled power cable.

4. Parentah instalasi

Replacing the Jandy TruClear Salt Cell Assembly is a straightforward process. Follow these steps carefully:

4.1. Step 1: Disconnect Power

Before beginning any work, ensure the pool pump and all associated electrical components are turned off at the main circuit breaker. This prevents accidental startup and electrical hazards.

4.2. Step 2: Drain Water

Open the air relief valve at the top of your pool filter to allow water to drain from the system. This will lower the water level in the plumbing, preventing water from spilling when the salt cell is removed.

4.3. Step 3: Remove Old Salt Cell

Locate the existing salt cell in your pool's plumbing system. The cell is typically installed in-line with the return plumbing to the pool. Unscrew the locking ring that secures the cell to the plumbing. Carefully lift the old salt cell assembly out of its housing. Disconnect the power cable from the control box.

Figure 2: The existing Jandy salt cell integrated into the pool's plumbing system.

angka 3: Tutup-up view of the electrical connector for the Jandy salt cell, which needs to be disconnected from the control box.

4.4. Step 4: Install New Salt Cell

Insert the new Jandy R0693900 TruClear Salt Cell Assembly into the plumbing housing. Ensure the flow arrows on the cell align with the direction of water flow in your plumbing. Tighten the locking ring securely to prevent leaks. Connect the power cable of the new cell to the Jandy TruClear control box.

Figure 4: The new Jandy R0693900 salt cell assembly, ready for installation, showing the integrated cable.

Gambar 5: Top view of the salt cell, highlighting the flow indicators for correct orientation during installation.

4.5. Step 5: Restore Power and Check Operation

Close the air relief valve on the filter. Restore power to the pool pump and control box at the main circuit breaker. Turn on the pool pump. Verify that the Jandy TruClear control box indicates

Dokumén Patali - R0693900

	Panggantian Sel Jandy TruClear: Panduan Pemasangan Suku Cadang Pitunjuk pamasangan resmi pikeun Jandy TruClear Cell Replacement (Bagian R0693900) pikeun sistem kolam renang Jandy Pro Series. Ngawengku peringatan kaamanan, eusi pakét, sareng prosedur pamasangan léngkah-léngkah.
	Jandy AquaPure Ei Series APURE35PLG Klorin Generating Alat Instalasi jeung Manual Operasi Pamasangan lengkep sareng manual operasi pikeun Jandy AquaPure Ei Series APURE35PLG 120V Plug-In Chlorine Generating Device. Nyertakeun kaamanan, déskripsi sistem, instalasi, persiapan cai, operasi, pangropéa, sareng ngungkulan.
	Pompa & Pemanas Gas Jandy VS: Panduan Panggantian Drop-In A comprehensive guide from Jandy for pool professionals and homeowners on replacing existing pool pumps and gas heaters with Jandy VS FloPro pumps and JXi heaters. Features include easy installation, performance benefits, technical specifications, and comparison charts with Pentair and Hayward models.
	Jandy AquaLink RS Sadaya Tombol sareng Manual Instalasi Sistem Kontrol OneTouch Pituduh pamasangan komprehensif pikeun sistem kontrol Jandy AquaLink RS, ngawengku Sadaya Model Tombol sareng OneTouch. Manual ieu nyadiakeun parentah lengkep pikeun setelan, wiring, programming, sarta ngungkulan kolam renang jeung parabot automation spa.
	Pituduh Pamasangan Blower Udara Kolam Renang sareng Spa Seri Jandy Pro Pituduh pamasangan anu lengkep pikeun Jandy Pro Series Pool and Spa Air Blowers (Modél PSB110, PSB115, PSB120, PSB210, PSB215, PSB220). Ngawengku tindakan pencegahan kaamanan anu penting, itungan ukuran blower, konfigurasi pipa ledeng (Standar, Long Run, Below Grade, Hartford Loop), sareng parentah kabel listrik pikeun operasi anu aman sareng efektif.
	Jandy Commercial Salt Chlorinator: Instalasi sareng Manual Operasi Pitunjuk komprehensif pikeun masang, ngoperasikeun, sareng ngajaga Jandy Commercial Salt Chlorinators (Modél JSWC40, JSWC53, JSWC80, JSWC100). Nyertakeun kaamanan, déskripsi sistem, pamasangan, operasi, pangropéa, sareng ngungkulan.