Bogen C100 Seri Klasik 100W AmpManual Pamaké lifier

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of the Bogen C100 Classic Series 100W Amplifier. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent damage.

The Bogen C100 is a 100-watt amplifier designed for commercial and industrial sound applications, featuring multiple inputs and robust performance.

2. Parentah Kasalametan penting

PERHATOSAN: Pikeun ngirangan résiko kahuruan atanapi kejutan listrik, ulah ngalaan alat ieu ka hujan atanapi lembab.

• Baca parentah ieu.
• Tetep parentah ieu.
• Heed sagala warnings.
• Turutan sagala parentah.
• Entong nganggo alat ieu caket cai.
• Ngabersihan ngan ku kaén garing.
• Ulah meungpeuk sagala bukaan ventilasi. Install luyu jeung parentah produsén urang.
• Entong dipasang di deukeut sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
• Ulah eleh tujuan kaamanan colokan polarized atawa grounding-tipe. A colokan polarized boga dua wilah jeung hiji leuwih lega ti lianna. A colokan tipe grounding boga dua wilah jeung prong grounding katilu. Agul lega atawa prong katilu disadiakeun pikeun kaamanan Anjeun. Upami colokan anu disayogikeun henteu pas kana stop kontak anjeun, konsultasi ka tukang listrik pikeun ngagantian stop kontak anu tos lami.
• Nangtayungan kabel listrik tina leumpang atawa diciwit, utamana dina colokan, wadah merenah, jeung titik dimana aranjeunna kaluar tina aparat.
• Ngan anggo kantétan/aksésori anu ditunjuk ku produsén.
• Cabut colokan alat ieu nalika badai kilat atanapi nalika henteu dianggo kanggo waktos anu lami.
• Rujuk sadayana jasa ka tanaga jasa anu mumpuni. Diperlukeun ngalayanan nalika aparatur ruksak ku cara naon waé, sapertos kabel catu daya atanapi colokan rusak, cairan tumpah atanapi barang murag kana aparatur, aparatur parantos kakeunaan hujan atanapi lembab, henteu beroperasi normal. , atawa geus turun.

3. Produk Langkungview

The Bogen C100 amplifier features a robust design with intuitive controls for various audio inputs and output configurations. Below are images illustrating the amplifier's key components and features.

Gambar 3.1: Hareupeun View of Bogen C100 Amppangagung. This image displays the front panel of the Bogen C100 amplifier, showing the input level controls for MIC 1, MIC 2, AUX 1, and AUX 2, along with Treble and Bass tone controls, and the main Power switch. The "Classic Series" and "C-100" model designation are also visible.

Gambar 3.2: Sisi View of Bogen C100 Amppangagung. Gambar ieu nunjukkeun sisi profile of the Bogen C100 amplifier, highlighting the ventilation grilles and the integrated power cord. The heat sink fins are visible on the left side.

Gambar 3.3: Tukangeun View of Bogen C100 Amppangagung. Gambar ieu nyadiakeun a view of the rear panel, detailing the various input and output terminals, including screw terminals for speakers, RCA inputs for auxiliary devices, and microphone inputs. The power cord and a large heat sink are also prominent.

Figure 3.4: Detail of Rear Panel. A close-up of the rear panel, showing the "MODEL C100 OUTPUT RATING 100W" label, along with the 2.5A HOLD fuse reset button and Intertek ETL US certification mark. Various input/output connections are also visible.

Figure 3.5: Power Switch Detail. This image focuses on the red power switch and the "POWER" indicator on the front panel, next to the "C-100" model designation and "BOGEN" brand logo.

Figure 3.6: Product Packaging and Key Features. The product box highlighting key features: 100 watts output, 4 inputs (1 MIC, 1 AUX, 1 TEL, 1 MIC/AUX), MIC precedence circuit, and telephone paging input. The UPC 0765368330090 is also visible.

Figure 3.7: Internal Product Label. A label showing internal product identifiers such as "NO-Q1", "BOGEN C100", "19LB(I)", and a barcode with the number 0776852 (likely a part or serial number).

3.1 Kadali Panel hareup

• MIC 1, MIC 2, AUX 1, AUX 2 Level Controls: Rotary knobs to adjust the volume for each input channel.
• Kontrol TREBLE: Nyaluyukeun réspon frékuénsi luhur.
• Kontrol BASS: Nyaluyukeun réspon frékuénsi handap.
• Saklar Daya: Toggles ka amplifier sareng mareuman.

3.2 Sambungan Panel Rear

• Kaluaran Speaker: Screw terminals for connecting speakers (e.g., 4-ohm, 8-ohm, 25V, 70V).
• Input mikropon: Connect dynamic microphones to the MIC 1 or MIC 2 inputs.
• Masukan Bantu: RCA jacks for connecting line-level audio sources (e.g., CD players, tuners).
• Telephone Paging Input: Dedicated input for telephone system integration.
• Inlet Daya AC: Pikeun nyambungkeun kabel daya utama.
• Fuse Reset Button: A red button to reset the internal fuse if an overload occurs.

4. Setup jeung Instalasi

4.1 Ngabongkar bungkusan

Ati-ati ngaleupaskeun ampLifier tina bungkusan na. Nyimpen sadaya bahan bungkusan pikeun transportasi atanapi neundeun ka hareup. Pariksa unit pikeun tanda-tanda karusakan. Lamun karuksakan kapanggih, ngahubungan dealer Anjeun langsung.

4.2 Nempatkeun

Tempatna amplifier on a stable, flat surface. Ensure adequate ventilation around the unit to prevent overheating. Do not block the ventilation grilles on the top, sides, or rear of the amplifier. Avoid placing the amptempatkeun di deukeut sumber panas atawa dina sinar panonpoé langsung.

4.3 Nyambungkeun Speaker

C100 ieu amplifier supports various speaker configurations. Identify the impedance or voltage requirements of your speakers and connect them to the appropriate terminals on the rear panel.

1. Determine Speaker Type: Identify if your speakers are low-impedance (4-ohm, 8-ohm) or constant voltage (25V, 70V).
2. Persiapan kawat: Strip approximately 1/2 inch of insulation from the speaker wires.
3. Sambungan:
   • For 4-ohm speakers, connect to the "4 OHM" and "COM" terminals.
   • For 8-ohm speakers, connect to the "8 OHM" and "COM" terminals.
   • For 25V constant voltage speakers, connect to the "25V" and "COM" terminals.
   • For 70V constant voltage speakers, connect to the "70V" and "COM" terminals.
4. Ensure all connections are secure and that there are no stray wire strands that could cause a short circuit.

4.4 Nyambungkeun Sumber Audio

Connect your audio sources to the appropriate input jacks on the rear panel.

• Mikropon: Connect dynamic microphones to the MIC 1 or MIC 2 inputs.
• Alat bantu: Connect line-level sources such as CD players, tuners, or media players to the AUX 1 or AUX 2 RCA inputs.
• Pager Telepon: Connect your telephone system's paging output to the dedicated telephone input.

4.5 Sambungan Daya

Once all audio and speaker connections are made, plug the amplifier's power cord into a standard AC outlet (120V AC, 60Hz).

5. Parentah Operasi

5.1 Powering on / Pareum

Press the red POWER switch on the front panel to turn the amplifier ON. The switch will illuminate when the unit is powered. Press it again to turn the ampLifier OFF.

5.2 Nyaluyukeun Tingkat Input

Use the individual rotary level controls (MIC 1, MIC 2, AUX 1, AUX 2) on the front panel to adjust the volume of each connected audio source. Start with the controls at a low setting and gradually increase them to achieve the desired balance.

5.3 Kontrol Nada

• TREBLE: Rotate the TREBLE knob to adjust the high-frequency response of the audio. Turn clockwise to boost treble, counter-clockwise to cut.
• BASS: Rotate the BASS knob to adjust the low-frequency response of the audio. Turn clockwise to boost bass, counter-clockwise to cut.

Adjust these controls to suit your listening preference and the acoustics of the environment.

5.4 Microphone Precedence

C100 ieu amplifier features a microphone precedence circuit. When a signal is detected on the designated microphone input (typically MIC 1), it will automatically attenuate other audio sources, allowing the microphone signal to be heard clearly. This is particularly useful for paging or announcements.

6. Pangropéa

6.1 beberesih

Pikeun ngabersihan amplifier, disconnect it from the power outlet. Use a soft, dry cloth to wipe down the exterior surfaces. Do not use liquid cleaners, aerosols, or solvents, as these can damage the finish or internal components.

6.2 Ventilasi

Regularly check that the ventilation grilles are free from dust and obstructions. Proper airflow is crucial for preventing overheating and ensuring the longevity of the amppangagung.

6.3 Fuse Reset

Lamun éta amplifier unexpectedly loses power, check the red fuse reset button on the rear panel (Figure 3.4). If it has popped out, press it firmly to reset the internal fuse. If the fuse repeatedly trips, disconnect the amplifier and consult qualified service personnel.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

Bogen products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Bogen website. For technical support or service inquiries, please contact Bogen customer service or your authorized dealer.

Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.