SINOTIMER TM618N-2 Digital Programmable Timer Switch User Manual

Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your SINOTIMER TM618N-2 Digital Programmable Timer Switch. This device is designed for automatic control of electrical appliances based on a set weekly schedule, offering up to 16 ON/OFF programs. Please read this manual thoroughly before use to ensure proper functionality and safety.

Setup sareng Instalasi

1. Ngahurungkeun sareng Ngareset Mimiti

Saatos dianggo munggaran atanapi saatos dipareumantage, the timer display may be blank. Connect the timer to a power source (220VAC). To clear any previous settings and initialize the device, locate the small 'R' (Reset) button on the front panel. Use a pointed non-metallic object (like a toothpick) to press this button. The display will show '00:00:00' and all settings will be cleared.

Hareupeun view of the SINOTIMER TM618N-2 digital timer showing the display and control buttons.

Gambar 1: Hareupeun view of the TM618N-2 timer, displaying the LCD screen and control buttons including the 'R' (Reset) button.

2. Nyetél Waktos Ayeuna

Pencét éta JAM button and hold it.
Bari nyekelan JAM, pencét MINGGU to set the current day of the week (MO, TU, WE, TH, FR, SA, SU).
Bari nyekelan JAM, pencét JAM to set the current hour (0-23).
Bari nyekelan JAM, pencét MIN to set the current minute (0-59).
Ngaleupaskeun JAM button. The time is now set.

3. Parentah Wiring

The TM618N-2 timer requires careful wiring. Refer to the diagram below for correct connections. Ensure power is disconnected before performing any wiring.

Terminal 1 & 2: Power Input (200-250VAC). Connect your main power supply here.
Terminals 3, 4, 5: Output Contacts (16 AMP / 250VAC, 20 AMP @30 VDC).
- Terminal 3: Normally Closed (NC) contact.
- Terminal 4: Common (COM) contact.
- Terminal 5: Normally Open (NO) contact.
Connect your load (appliance) to the Common (4) and either Normally Open (5) for typical ON/OFF control, or Normally Closed (3) if you require the load to be ON when the timer is OFF.

Balik deui view of the SINOTIMER TM618N-2 digital timer showing wiring terminals and specifications.

Gambar 2: Tukangeun view of the TM618N-2 timer, illustrating the input and output wiring terminals with their respective ratings.

Parentah Operasi

1. Programming ON/OFF Times (16 Programs)

The timer supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

Pencét éta PROG button. The display will show '1 ON' and '00:00'.
Pencét MINGGU to select the day(s) for this program. You can choose a single day, specific days (e.g., MO-WE-FR), weekdays (MO-TU-WE-TH-FR), weekends (SA-SU), or all 7 days (MO-TU-WE-TH-FR-SA-SU).
Pencét JAM pikeun nyetel jam ON anu dipikahoyong.
Pencét MIN pikeun nyetel menit ON anu dipikahoyong.
Pencét PROG again. The display will show '1 OFF' and '00:00'.
Repeat steps 2-4 to set the OFF time for the first program.
Terus pencét PROG to cycle through the remaining 15 ON/OFF programs, setting each as needed. If you don't need all 16 programs, simply press JAM pikeun kaluar mode programming.
To clear a specific program, press PROG to navigate to that program, then press PANGELING. The time will be replaced with '--:--'.

2. Manual Override

The MANUAL button allows you to override the programmed settings temporarily or permanently.

Pencét MANUAL repeatedly to cycle through the modes:
- ON OTOMATIS: The timer is currently ON, but will follow the next programmed OFF time.
- PAreum otomatis: The timer is currently OFF, but will follow the next programmed ON time.
- ON: The timer output is continuously ON, ignoring all programs.
- Pareuman: The timer output is continuously OFF, ignoring all programs.
Pilih OTOMATIS mode (either ON AUTO or OFF AUTO) for the timer to resume its programmed schedule.

Pangropéa

The SINOTIMER TM618N-2 is designed for low maintenance. Follow these guidelines to ensure its longevity:

beberesih: Use a soft, dry cloth to clean the exterior of the timer. Do not use abrasive cleaners, solvents, or immerse the device in water.
Lingkungan: Ensure the timer is installed in a dry environment, away from direct sunlight, extreme temperatures, and corrosive gases.
Battery (Internal): The timer has an internal battery to retain settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display consistently goes blank or loses settings after power interruptions, the internal battery may need servicing by a qualified technician.

Pamérésan masalah

Masalah	Mungkin Cukang lantaranana	Solusi
Paparanana kosong.	No power supply; internal battery depleted.	Check power connection (220VAC). Press the 'R' (Reset) button. If problem persists, contact support.
Timer does not switch ON/OFF at programmed times.	Incorrect programming; timer is in 'ON' or 'OFF' manual mode; current time is incorrect.	Verify programmed ON/OFF times and days. Ensure the timer is in 'AUTO' mode (ON AUTO or OFF AUTO) by pressing the MANUAL button. Check and correct the current time.
Programs are lost after power outage.	Internal battery for memory backup is depleted.	This indicates the internal battery needs replacement. Contact a qualified technician or SINOTIMER support.
Tombol-tombol henteu ngaréspon.	Device frozen; physical damage.	Press the 'R' (Reset) button. If buttons remain unresponsive, the unit may be faulty.

spésifikasi

Fitur	Rincian
Modél	TM618N-2
merek	SINOTIMER
Masukan Voltage	200-250VAC
Kamampuh kaluaran	16 AMP / 250VAC, 20 AMP @30 VDC
Jumlah Program	16 ON/OFF settings
Siklus	7 Days (Weekly)
Ukuran produk (D x W x H)	1.18 "D x 2.36" W x 2.36" H
ASIN	B08FT5Z5PQ
UPC	191869715935
Tanggal Sadia munggaran	26 Nopémber 2020

Dimensions of the SINOTIMER TM618N-2 digital timer, showing height, width, and depth measurements.

Gambar 3: Diménsi view of the TM618N-2 timer, indicating its physical size.

Garansi sareng Rojongan

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. SINOTIMER products typically come with a standard manufacturer's warranty covering defects in materials and workmanship.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact SINOTIMER directly or visit their official website. You can often find support contact details on the product packaging or through the retailer where the product was purchased.

Visit the official SINOTIMER store for more information: SINOTIMER Store

	Sinotimer TM-616 Weekly Programmable Timer - spésifikasi jeung operasi Inpo wincik dina Sinotimer TM-616 otomatis programmable mingguan, kaasup spésifikasi, fungsi tombol, dimensi, diagram wiring, sarta lineup produk. Fitur programming 7 poé sarta kapasitas switching 30A.
	SINOTIMER TM-630A/TM-630S Digital Timer: Fitur sareng Spésifikasi spésifikasi teknis lengkep jeung fitur pikeun SINOTIMER TM-630A na TM-630S timer programmable digital, kaasup catu daya, rentang timing, dimensi, sarta wiring.
	SINOTIMER TM920 Series 3-in-1 Programmable Timer Switch Manual Pamaké Manual pamaké komprehensif pikeun SINOTIMER TM920 Series 3-in-1 programmable switch timer, featuring 7 poé programming, pulsa, jeung fungsi mundur. Diajar kumaha nyetél tanggal, waktos, modeu kontrol, sareng setelan liburan.
	SINOTIMER TM928 Series HD LCD Digital Timer Pindah - Manual pamaké sarta spésifikasi Pituduh lengkep pikeun switch timer digital séri SINOTIMER TM928, ngawengku fitur, spésifikasi, setelan, jeung kabel pikeun model kawas TM919, TM920, TM928, TM928S, TM928R, jeung TM929.
	SINOTIMER TM618s Digital Programmable Timer - Manual pamaké sarta spésifikasi Pituduh komprehensif pikeun timer programmable digital SINOTIMER TM618s, ngawengku fitur, spésifikasi, programming, wiring, jeung instalasi. Idéal pikeun ngadalikeun alat-alat listrik kalawan jadwal ON / OFF poean.
	Sinotimer TM-619 Series Digital Programmable Timer - Manual pamaké Pituduh komprehensif pikeun program sareng masang séri Sinotimer TM-619 digital panel-mount timers, kalebet detail model, fungsi override, sareng petunjuk kabel.