Manual+

ELECROW RC070S

ELECROW 7 Inch Touchscreen Monitor (Model RC070S) Instruction Manual

1. Produk Langkungview

This manual provides detailed instructions for the setup, operation, and maintenance of your ELECROW 7 Inch Touchscreen Monitor, Model RC070S. Please read thoroughly before use.

Modél: RC070S

Merek: ELECROW

The ELECROW 7-inch IPS touchscreen offers a 1024x600 resolution, adjustable via software to 1920x1080. It features vivid colors, a 178° viewing angle, and a durable, scratch-resistant tempered glass touch panel. Designed for plug-and-play functionality, it connects via HDMI for video and USB for power and touch control, requiring no additional drivers. It is compatible with various devices including Raspberry Pi 5/4/3B+/3B/2B+, Banana Pi, Jetson Nano, PCs, laptops, and gaming consoles. The monitor supports 5-point capacitive touch on Windows 11/10/8/7 and single-touch on Raspberry Pi and Jetson Nano. Integrated dual speakers and a 3.5mm headphone jack provide immersive audio, with adjustable volume and backlight settings.

2. Eusi Paket

  • 1 x 7 Inch IPS Monitor
  • 1 x USB to Micro USB Connector
  • 1 x HD to Micro HD Connector
  • 1 x USB ka Micro USB Cable
  • 1 x HD to HD Cable
  • 4 x M2.5 Sekrup
  • 2 x M3 Sekrup
  • 2 x Speaker
  • 2 x Pro Nangtung
  • 4 x Small Copper Pillars

3. Spésifikasi Téknis

FiturSpésifikasi
Ukuran Layar Témbongkeun7 inci
Tipe PanelIPS
Toél TipeSentuhan Kapasitif 5-titik
Resolusi1024 x 600 Pixels (Software adjustable to 1920x1080)
Caang260 cd/m²
Viewdina Angle178° (H) / 178° (V)
Refresh Laju60Hz
Palabuhan HDMI1
palabuhan USB1 (for power and touch)
Kaluaran Audio3.5mm Audio Jack, Built-in Dual Speakers
Masukan Voltage5 volt
Total Power (Max)2.55W
Suhu Operasi-20°C ~ 60°C
Suhu Panyimpenan-30°C ~ 70°C
Dimensi produk1 x 6.5 x 4 inci
Item Beurat8.3 ons
Dirojong OSWindows 11/10/8/7, Raspbian, Ubuntu, Kali, Retropie, Jetson Nano

4. Setup jeung Instalasi

4.1 General Assembly

To set up the monitor, first attach the included stands to the bottom of the display using the provided screws. Ensure the protective film is removed from the stands before assembly.

Image showing the assembly of the monitor stands with screws.
Figure 1: Attaching the stands to the monitor. The stands provide stability for desktop use.

4.2 Raspberry Pi Connection

For Raspberry Pi connections, use the provided HDMI cable for video and the USB cable for power and touch functionality. For Raspberry Pi 4 and 5, use the included Micro-HDMI to HDMI adapter. No drivers are required for basic functionality.

penting: For Raspberry Pi 4, if using a system image after 2021-10-30 (e.g., Bullseye), modify dtoverlay = vc4-kms-v3d ka dtoverlay = vc4-fkms-v3d dina config.txt file. For Buster, comment out dtoverlay = vc4-fkms-V3D by adding a '#' at the beginning of the line.

Image showing a Raspberry Pi connected to the monitor using short HDMI and USB cables.
Figure 2: Raspberry Pi connected to the monitor. The short cables minimize clutter and are ideal for integrated setups.

Video 1: Step-by-step guide on how to install the 7-inch screen with a Raspberry Pi, demonstrating cable connections and initial setup.

Video 2: Instructions on how to install the Raspberry Pi board with the screen, detailing the physical mounting and connections.

4.3 Sambungan PC

Connect the monitor to your PC or laptop using the HDMI cable for video and the USB cable for power and touch. The monitor is driver-free for Windows 11/10/8/7. Adjust display settings on your PC for optimal resolution.

Image showing the monitor connected to a laptop, extending the display.
Figure 3: Monitor connected to a PC or laptop, demonstrating its use as an extended display.

5. Ngoperasikeun Monitor

5.1 Fungsi Toél

The monitor features a 5-point capacitive touchscreen for multi-touch gestures on Windows and single-touch on Raspberry Pi and Jetson Nano. Ensure the USB cable is connected to enable touch input.

Image showing a hand interacting with the 7-inch capacitive touchscreen, demonstrating multi-touch capability.
Figure 4: User interacting with the 5-point capacitive touch screen.

5.2 Menu dina layar (OSD).

The monitor includes tactile buttons on the side for navigating the OSD menu. These buttons allow adjustment of various display settings:

  • Gambar: Adjust backlight, brightness, contrast, and sharpness.
  • warna: Modify panel uniformity, gamma, temperature, and color effects.
  • sateuacanna: Set aspect ratio.
  • Audio: Kadalikeun volume sareng bisukeun.
Image showing the back of the monitor with labeled buttons for menu navigation and ports.
Gambar 5: Tukangeun view of the monitor highlighting the OSD menu buttons and various ports.

5.3 Fitur Audio

The monitor is equipped with built-in dual speakers and a 3.5mm headphone jack for audio output. Digital audio output is also supported via HDMI.

Image showing the monitor with built-in dual speakers and a Raspberry Pi connected.
Figure 6: Monitor with integrated dual speakers for audio output.

6. Cara ngungkulan

  • Monitor teu hurung: Ensure the power cable (USB-A to C) is properly plugged into both the Raspberry Pi/PC and the monitor.
  • Image is reversed: The monitor does not support image flip.
  • No touch functionality: Verify the USB-A to C cable is securely connected between the host device and the monitor.
  • No signal on display: Ensure the HDMI cable is properly connected between the host device and the monitor. If using a mini HDMI port, ensure the correct adapter is used.
  • Speakers at high volume cause issues: When speakers are at 80% or more volume, connect the power port (not touch port) to provide full power.

7. Catetan Penting

  • The Raspberry Pi cannot be powered by powering the screen.
  • Always connect the power interface when powering the screen. Supplying power through the touch interface may lead to insensitive or unusable touch functionality.

8. Garansi jeung Rojongan

ELECROW products offer a one-year warranty. For quality-related issues, you may return any undamaged product within 12 months for a refund or replacement. Shipping costs and charges are not included.

For support or inquiries, please contact ELECROW customer service:

Dokumén Patali - RC070S

Praview Manual Pangguna Layar HD ELECROW 5 Inci (DIS05490T) - Setelan sareng Spésifikasi
Buku pituduh lengkep pikeun Layar ELECROW 5 Inci HD (DIS05490T). Diajar ngeunaan spésifikasi produk, diménsi, sambungan, sareng eusi pakét pikeun setelan anu gampang sareng alat sapertos Raspberry Pi.
Praview ELECROW RC050S 5-Inch HDMI Touchscreen Monitor User Manual
User manual for the ELECROW RC050S 5-inch HDMI touchscreen monitor, detailing setup, connection to Raspberry Pi and PC, troubleshooting, and specifications.
Praview Pituduh Perakitan Casing Mini PC Elecrow pikeun Raspberry Pi 5 sareng Jetson Orin Nano
Pituduh perakitan lengkep pikeun casing mini PC Elecrow, anu ngajelaskeun prosés pamasangan pikeun Raspberry Pi 5 sareng NVIDIA Jetson Orin Nano, kalebet layar OLED sareng setelan saklar logam.
Praview Pituduh Mimitian Gancang Kit Sadayana-dina-Hiji CrowPi
Pituduh ieu nyayogikeun pitunjuk pikeun nyetél sareng nganggo Elecrow CrowPi All-in-One Kit, papan pamekaran Raspberry Pi anu dirancang pikeun pendidikan sareng proyék STEM. Ieu ngawengku pra-instalasi, setelan parangkat lunak, perakitan perangkat keras, sareng boot-up awal.
Praview Manual Pangguna Layar Toél Kapasitif SPI Terminal 3.5 inci ELECROW ESP32
Manual pangguna anu lengkep pikeun Terminal ELECROW ESP32 anu nampilkeun layar toél kapasitif SPI 3.5 inci. Ngawengku spésifikasi, detil perangkat keras, diagram antarmuka, sareng sumber daya ékspansi pikeun pamekar sareng penggemar hobi.
Praview Manual Pamaké Crowpi3 - Elecrow
Manual pamaké pikeun Crowpi3, detailing setelan, AI learning fitur, jeung parentah pamakéan. Ngawengku inpormasi ngeunaan komponén hardware sareng integrasi parangkat lunak.