ORION Cobalt CBA4500.1D Monoblock Class D AmpManual Pamaké lifier

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your ORION Cobalt CBA4500.1D Monoblock 1-Channel Class D Amppangagung. Ieu amplifier is designed to deliver powerful and precise audio for car subwoofers, featuring a Class D design for efficiency and robust performance.

Key features include a quality frequency response, crossover network, 1 Ohm stability, adjustable low pass and subsonic filters, bass boost, and a MOSFET power supply for reliable operation. It also incorporates a 2-way protection circuitry to safeguard against potential issues.

2. Naon dina Box

Upon unpacking your ORION Cobalt CBA4500.1D amplifier, mangga pastikeun sadaya barang aya:

• ORION Cobalt CBA4500.1D Monoblock Amppangagung
• Pamasangan Hardware
• Kenop Bass Jarak Jauh
• Manual pangguna (dokumén ieu)

If any items are missing or damaged, please contact your dealer or ORION customer support immediately.

3. Émbaran Kasalametan

PERHATOSAN: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please refer to www.P65Warnings.ca.gov.

Pastikeun salawasna ventilasi anu saé di sakitarna amplifier to prevent overheating. Incorrect installation or operation can lead to damage to the amplifier, vehicle, or personal injury. It is recommended that installation be performed by a qualified professional.

4. Pitunjuk Instalasi

Proper installation is crucial for optimal performance and safety. It is highly recommended to have this amplifier installed by a certified car audio professional.

4.1 Pamasangan Amppangagung

Choose a mounting location that is dry, well-ventilated, and protected from direct sunlight or excessive heat. Ensure there is sufficient airflow around the amplifier to prevent overheating. The amplifier can be mounted on a panel or using brackets.

Gambar: Top view of the ORION Cobalt CBA4500.1D Monoblock Amplifier, showing the ORION logo and model number.

Gambar: Sisi view of the ORION Cobalt CBA4500.1D Monoblock Amplifier, displaying the power input terminals (+12V, REM, GND) and speaker output terminals, along with the fuse slots.

4.2 Sambungan Wiring

Sateuacan nyambungkeun naon waé, pegatkeun terminal batré négatif kandaraan pikeun nyegah korsleting listrik.

1. Sambungan Daya (+ 12V): Connect a heavy gauge power cable (not included) from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Ensure an appropriate fuse holder is installed within 18 inches of the battery.
2. Sambungan taneuh (GND): Connect a heavy gauge ground cable (not included) from the GND terminal on the amplifier to a clean, unpainted metal surface on the vehicle's chassis. The ground point should be as short as possible.
3. Jauh Hurungkeun (REM): Connect a remote turn-on wire (not included) from your head unit's remote output to the REM terminal on the amplampu. Kawat ieu nunjukkeun sinyal ka amplampu pikeun ngahurungkeun sareng mareuman nganggo head unit anjeun.
4. Kaluaran Speaker: Connect your subwoofer(s) to the speaker output terminals. This is a 1-channel monoblock amplifier, designed for a single subwoofer or multiple subwoofers wired to a 1 Ohm stable load. Refer to your subwoofer's specifications for proper wiring configurations.
5. RCA Input (INPUT): Connect RCA cables from your head unit's subwoofer output to the RCA input jacks on the amppangangkat. The amplifier supports low-level (RCA) inputs.
6. Remote Bass Knob: Connect the included remote bass knob to the 'REMOTE' port on the amplifier. This allows for convenient adjustment of the bass level from the driver's seat.

Gambar: Sisi view of the ORION Cobalt CBA4500.1D Monoblock Amplifier, showing RCA input/output, gain control, low pass filter, subsonic filter, phase switch, bass boost, and remote bass knob port.

Image: The remote bass knob and its connecting cable, used for convenient bass level adjustment.

5. Parentah Operasi

Sakali dipasang, éta amplifier can be configured for optimal audio performance using its various controls.

5.1 Gain Control (GAIN)

The GAIN control adjusts the input sensitivity of the amplifier. Start with the gain set to minimum (MIN) and slowly increase it until the desired volume is achieved without distortion. This should be matched to the output voltage tina unit sirah anjeun.

5.2 Low Pass Filter (LPF)

The LPF control allows you to set the upper frequency limit for the amplifier's output, typically ranging from 40Hz to 250Hz. This ensures that only low frequencies are sent to your subwoofer, preventing it from playing higher frequencies it's not designed for.

5.3 Subsonic Filter (SONIC)

The SUB SONIC filter removes extremely low frequencies (below 15Hz-50Hz) that are inaudible but can cause your subwoofer to over-excurt and waste power. Adjust this to protect your subwoofer and improve sound quality.

5.4 Bass Boost (BASS BOOST)

The BASS BOOST control provides an adjustable boost to low frequencies, typically from 0dB to 12dB. Use this feature to enhance the bass impact according to your preference. Use sparingly to avoid distortion or damage to speakers.

5.5 Phase Shift (PHASE)

The PHASE switch (0° or 180°) helps to align the phase of the subwoofer's output with the rest of your car audio system. Experiment with both settings to find the one that provides the most coherent and impactful bass response.

5.6 Remote Bass Knob

The remote bass knob provides convenient, real-time adjustment of the subwoofer's output level from your driving position. This allows for quick adjustments without needing to access the amplirén langsung.

6. Pangropéa

To ensure the longevity and optimal performance of your ORION Cobalt CBA4500.1D ampLifier, turutan tungtunan pangropéa ieu:

• beberesih: Ngabersihan périodik ampexterior lifier urang ku lemes, lawon garing. Hindarkeun ngagunakeun bahan kimia anu kasar atanapi pembersih abrasive.
• Ventilasi: Pastikeun yén amplifier's ventilation openings are not obstructed. Proper airflow is essential to prevent overheating.
• Sambungan: Regularly check all wiring connections for tightness and corrosion. Loose or corroded connections can lead to performance issues or damage.
• Sekering: The amplifier is equipped with fuses for protection. If a fuse blows, replace it only with a fuse of the same type and rating. Never use a higher rated fuse.

7. Cara ngungkulan

Upami anjeun ngalaman masalah sareng anjeun amplifier, tingali léngkah-léngkah ngungkulan masalah umum ieu:

If the problem persists after following these steps, please contact ORION customer support or a qualified service technician.

8. Spésifikasi

9. Video Produk Resmi

10. Garansi jeung Rojongan

ORION products are designed for durability and performance. For warranty information, technical support, or service inquiries, please refer to the official ORION websitus atanapi hubungi dealer resmi anjeun.

Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Pikeun sumberdaya tambahan sarta informasi produk, mangga buka Toko ORION di Amazon.