Bubuka
This manual provides essential information for the proper installation, operation, and maintenance of your FLOMEC TM Series Water Meter, model TM10NQ9GMA. This meter is designed for accurate measurement of liquid flow in various applications, including water processing and irrigation. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Émbaran Kasalametan
- Salawasna nganggo alat pelindung pribadi (PPE) anu pas salami instalasi sareng perawatan.
- Ensure the system is depressurized and drained before attempting any installation or service.
- Do not exceed the specified pressure and temperature ratings of the meter.
- Verify proper sealing of all connections to prevent leaks.
- Jauhkeun batréna tina jangkauan barudak. Buang batréna numutkeun peraturan lokal.
Produk Leuwihview
The FLOMEC TM Series Water Meter is an economical and robust solution for liquid flow measurement. It features a durable schedule 80 PVC housing and a local display that provides real-time flow rate, accumulated total, and a resettable total. The meter supports three engineering units: Gallons, Liters, and Cubic Feet. It is factory-calibrated and battery-operated for ease of use.
Setup sareng Instalasi
The TM10NQ9GMA model features 1-inch Female NPT fittings for straightforward integration into your piping system. Proper installation is crucial for accurate readings and long-term performance.
Léngkah-léngkah pamasangan:
- Prepare the Piping: Ensure the pipe section where the meter will be installed is clean and free of debris. The meter requires a straight run of pipe before and after for optimal accuracy.
- Orient the Meter: Observe the flow direction arrow on the meter body. Install the meter so that the arrow aligns with the direction of liquid flow in your system.
- Sambungkeun Fittings: Apply appropriate thread sealant (e.g., PTFE tape or pipe dope) to the 1-inch Male NPT threads of your piping. Carefully thread the meter onto the pipe fittings. Do not overtighten, as this can damage the PVC housing.
- Pariksa bocor: Slowly pressurize the system and inspect all connections for leaks. Tighten as necessary.
- Pamasangan batré: The meter comes with two AAA alkaline batteries pre-installed. If replacement is needed, refer to the Maintenance section.
Parentah Operasi
The FLOMEC TM Series Water Meter is designed for simple operation with its intuitive display and two-button interface.
Fungsi Témbong:
- Laju aliran: Shows the instantaneous flow rate of the liquid.
- Total sadayana: Displays the cumulative total volume of liquid that has passed through the meter since its initial installation. This total is non-resettable.
- Total bisa direset: Displays a total volume that can be reset for batching or specific measurement periods.
Fungsi Tombol:
- RATE Button: Press to cycle through display modes, typically showing flow rate.
- TOTAL Button: Press to cycle through totalizer modes (Grand Total, Resettable Total). Hold to reset the Resettable Total.
Ngarobah Unit:
The meter supports Gallons, Liters, and Cubic Feet. Refer to the detailed programming instructions in the full product manual (if available) for specific steps on how to change the displayed units. Typically, this involves a combination of button presses during power-up or a specific menu sequence.
Pangropéa
Regular maintenance ensures the longevity and accuracy of your FLOMEC TM Series Water Meter.
Ngagantian batré:
The meter operates on two AAA alkaline batteries. When the battery indicator appears on the display, it is time to replace them.
- Ensure the system is depressurized and the meter is accessible.
- Locate the battery compartment on the top of the display unit.
- Taliti cabut screws securing panutup batré.
- Remove the old AAA batteries and insert two new AAA alkaline batteries, observing correct polarity.
- Replace the battery cover and tighten the screws to ensure a watertight seal.
beberesih:
Periodically clean the exterior of the meter with a damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the housing or display.
Pamérésan masalah
If you encounter issues with your FLOMEC TM Series Water Meter, refer to the following common troubleshooting steps:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya tampilan atawa taram tampilan | Batré maot atanapi lemah | Replace batteries with new AAA alkaline batteries. |
| Bacaan teu akurat | Incorrect installation (e.g., wrong flow direction, insufficient straight pipe run) | Verify meter orientation and ensure adequate straight pipe sections before and after the meter. |
| No flow reading despite liquid flow | Obstruction in the meter or sensor issue | Depressurize and inspect the meter for any blockages. If the issue persists, contact technical support. |
| Bocor dina sambungan | Improperly sealed threads or damaged fittings | Depressurize, reapply thread sealant, and retighten connections. Inspect fittings for damage. |
For issues not covered here, please contact FLOMEC customer support.
spésifikasi
Detailed technical specifications for the FLOMEC TM Series Water Meter (TM10NQ9GMA).
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | TM10NQ9GMA |
| Tipe Pas | 1 inch Female NPT |
| Rentang Tingkat Aliran | 5 to 50 Gallons Per Minute (19 to 190 Liters Per Minute) |
| Akurasi | ± 3.0% tina bacaan |
| Peunteun Tekanan | 225 PSI at 73°F (pressure rating reduces with higher temperature) |
| Kisaran Suhu Operasi | 32°F nepi ka 140°F (0°C nepi ka 60°C) |
| Unit tampilan | Gallons, Liters, Cubic Feet |
| Sumber Daya | 2 x Batré Alkali AAA |
| Ukuran Paket | 8.98 x 4.17 x 3.94 inci |
| Item Beurat | 1 pon |
| Produsén | Great Plains Industries |
Garansi sareng Rojongan
The FLOMEC TM Series Water Meter is manufactured by Great Plains Industries. For specific warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official FLOMEC websitus. Disarankeun pikeun nyimpen bukti pameseran anjeun pikeun klaim garansi.
