Buku Panduan Kipas Casing PC Aerocool Mirage 12 Pro

Bubuka

Welcome to the instruction manual for your Aerocool Mirage 12 Pro PC Case Fan kit. This manual provides essential information for the proper installation, operation, and maintenance of your new 3 x 120mm Addressable RGB (ARGB) fans and H66F RGB Hub. Please read this manual thoroughly before proceeding with installation to ensure optimal performance and safety.

Image: The Aerocool Mirage 12 Pro PC Case Fan kit, showcasing three ARGB fans, the H66F RGB hub, and the included remote control. The fans feature a vibrant, customizable lighting effect.

Eusi pakét

Pastikeun yén sadaya item anu didaptarkeun di handap aya dina pakét anjeun:

• 3 x Aerocool Mirage 120mm ARGB Fans
• 1 x H66F 6-Port RGB Hub with PWM Control
• 1 x Remote Control for RGB and Fan Speed
• Mounting Screws for Fans
• Cables for Hub Connection (e.g., SATA power, ARGB sync cable)

Émbaran Kasalametan

Mangga perhatikeun tungtunan kaamanan di handap ieu:

• Salawasna pegatkeun sambungan kakuatan tina komputer Anjeun sateuacan masang atawa miceun komponén nanaon.
• Nanganan komponén kalayan ati-ati pikeun nyegah karusakan.
Ulah nyabak bilah kipas nalika keur dioperasikeun.
• Ensure proper cable routing to prevent interference with moving parts or airflow.
• Do not expose the hub or fans to moisture or extreme temperatures.

Setup sareng Instalasi

Follow these steps to install your Aerocool Mirage 12 Pro fans and H66F RGB Hub:

1. Nyiapkeun Sistim anjeun: Power off your computer and disconnect it from the power outlet. Open your PC case to access the internal components.
2. Install the Fans: Mount the 120mm fans into your desired fan locations within the PC case (e.g., front, top, rear). Use the provided mounting screws. The fans are equipped with anti-vibration pads to minimize noise.


Image: Three Aerocool Mirage 120mm ARGB fans, viewed from the front, illustrating their design and readiness for mounting within a PC case.

3. Connect Fans to H66F Hub: Connect each 6-pin fan cable from the Mirage fans to the corresponding 6-pin ports on the H66F RGB Hub. The hub supports up to six fans.
4. Connect H66F Hub to Power: Connect the SATA power connector from your PC's power supply unit (PSU) to the H66F RGB Hub. This provides power to both the fans and the RGB lighting.


Gambar: A lengkep view of the Aerocool H66F RGB Hub, highlighting its multiple connection ports for fans and ARGB accessories, as well as the power input.

5. Connect H66F Hub to Motherboard (Optional ARGB Sync): If you wish to synchronize the fan's RGB lighting with your motherboard's software, connect the hub's 5V ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard. Ensure it is a 5V ARGB header, not a 12V RGB header, to prevent damage.
6. Manajemén Kabel: Route all cables neatly to improve airflow and aesthetics within your PC case.
7. Tutup Case sareng Hurungkeun: Once all connections are secure, close your PC case and reconnect the power. Power on your computer.

Parentah Operasi

Your Aerocool Mirage 12 Pro fans can be controlled via the included remote control or, if connected, through your motherboard's ARGB software.

Ngagunakeun Remote Control

The remote control allows you to adjust fan speed and RGB lighting effects. Ensure the remote has a working battery.

Gambar: A lengkep view of the Aerocool RGB remote control, displaying its array of buttons for controlling fan speed, lighting modes, colors, and brightness.

• Tombol Daya: Turns the RGB lighting on or off.
• PWM Button: Toggles between PWM fan speed control modes. The H66F hub provides PWM control functions for optimized fan speed.
• MANUAL Button: Activates manual control for lighting effects.
• HUB Button: Switches control to the H66F hub's internal lighting modes.
• MOBO Button: Switches control to motherboard ARGB software (if connected to a compatible header).
• MODE / COLOR / SPEED Buttons: Adjust the lighting mode, color, and effect speed.
• ASTRO / AUTO / RAINBOW Buttons: Select specific pre-programmed ARGB lighting effects.
• Brightness Buttons (Sun icons): Adjust the brightness level of the RGB lighting.
• Tombol konci: Locks the current lighting settings.

Motherboard Software Control

If you connected the H66F Hub to your motherboard's 5V ARGB header, you can use your motherboard's proprietary RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize the lighting effects. Ensure the remote control is set to 'MOBO' mode or the hub is configured for motherboard control.

RGB Lighting Features

The Aerocool Mirage 12 Pro fans feature an infinity mirror design and a single RGB LED ring, creating a captivating visual effect.

Gambar: A close-up view of three Aerocool Mirage 12 Pro fans, highlighting the mesmerizing infinity mirror effect created by their ARGB lighting and central acrylic design.

• Infinity Mirror Design: An acrylic mirror in the center of the fan, combined with the RGB LED ring, creates an illusion of infinite depth.
• Addressable RGB (ARGB): Each LED can be controlled individually, allowing for complex and dynamic lighting patterns.
• Multiple Effects: Choose from a variety of pre-set effects via the remote control or customize extensively with motherboard software.

Pangropéa

Regular maintenance helps ensure the longevity and optimal performance of your fans:

• beberesih lebu: Periodically clean dust from the fan blades and housing using compressed air or a soft brush. Ensure the PC is powered off before cleaning.
• Pariksa sambungan: Occasionally check that all cables are securely connected to the fans, hub, and motherboard.
• Kaayaan Lingkungan: Operate the fans within recommended temperature and humidity ranges to prevent damage.

Pamérésan masalah

If you encounter issues with your Aerocool Mirage 12 Pro fans, refer to the following common problems and solutions:

• Penggemar Teu Diputer:
  • Ensure the PC is powered on.
  • Verify that the H66F Hub is correctly connected to the PSU via a SATA power cable.
  • Check that all 6-pin fan cables are securely connected to the H66F Hub.
• Lampu RGB Teu Gawé:
  • Check the remote control battery and ensure it is functioning.
  • If using motherboard control, ensure the hub's ARGB cable is connected to a 5V ARGB header and the remote is set to 'MOBO' mode.
  • Confirm that the RGB lighting is not turned off via the remote control or motherboard software.
• Noise kaleuleuwihan:
  • Ensure fans are securely mounted using the anti-vibration pads.
  • Check for any cables or obstructions interfering with the fan blades.
  • Dust accumulation can cause noise; clean the fans if necessary.
• PWM Control Behavior:
  • The H66F hub provides PWM control functions for fan speed optimization. If experiencing stepped fan speed control, ensure your motherboard's BIOS/UEFI settings are configured for PWM control on the connected fan header.

spésifikasi

Garansi sareng Rojongan

Kanggo inpormasi garansi sareng dukungan téknis, mangga tingal situs resmi AeroCool. websitus atanapi ngahubungan pangecér Anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.

Resmi AeroCool Websitus: www.aerocool.io