Intex Dura-Beam Standard Pillow Rest Classic Airbed Series Twin Instruction Manual

Produk Leuwihview

The Intex Dura-Beam Standard Pillow Rest Classic Airbed Series Twin is designed for comfort and convenience. This airbed features a high-powered internal electric pump for easy inflation and deflation, a velvety soft sleeping surface, and an integrated pillow rest for enhanced comfort. With a bed height of 10 inches and a weight capacity of 300 pounds, it provides a reliable sleeping solution for various needs.

Included components are the airbed and a repair patch.

Image: The Intex Dura-Beam Standard Pillow Rest Classic Airbed Series Twin, fully inflated and ready for use.

Émbaran Kasalametan

• Do not cover the pillow rest with any material to prevent suffocation risk.
• Ulah ngaleuwihan kapasitas beurat 300 lbs.
• Always follow the instructions provided with the internal pump for safe operation.
• Keep the airbed away from sharp objects and heat sources.

Setup jeung Inflasi

The Intex Dura-Beam airbed features a built-in electric pump for quick and easy inflation and deflation. Ensure the airbed is placed on a clean, level surface free from sharp objects before inflation.

1. Unroll the airbed and lay it flat.
2. Locate the built-in electric pump on the side of the airbed.
3. Open the power cord compartment and plug the pump into a standard electrical outlet.
4. Turn the pump dial to the "Inflate" position (usually indicated by an arrow pointing towards the airbed).
5. Allow the airbed to inflate to your desired firmness. This typically takes about 60 seconds.
6. Once inflated, turn the pump dial to the "Off" position and unplug the power cord. Store the cord back in its compartment.

Image: Detail of the built-in electric pump, showing the inflation/deflation dial and power cord.

Deflasi

1. Colokkeun pompa kana stop kontak listrik.
2. Turn the pump dial to the "Deflate" position (usually indicated by an arrow pointing away from the airbed).
3. Allow the pump to remove air until the airbed is fully deflated.
4. Turn the pump dial to the "Off" position, unplug the cord, and store it.
5. Fold or roll the deflated airbed for storage.

Video Pangajaran

Operating the Airbed

Upon initial use, the material of the airbed may stretch, causing a perceived loss of air pressure. This is normal and not an indication of a leak. Simply re-inflate the bed as needed to achieve your desired firmness. This stretching and re-inflation process may be required for the first 2-3 nights of use until the material fully settles.

The integrated pillow rest provides additional head and neck support, eliminating the need for extra pillows.

Image: The Intex airbed placed in a room, showcasing its design and integrated pillow.

Pangropéa

beberesih

To clean the airbed, wipe the flocked surface with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners, as these can damage the material. Ensure the airbed is completely dry before storing.

Panyimpenan

After deflation, fold or roll the airbed neatly. Store it in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the stored airbed to prevent damage.

Ngalereskeun Tambalan

A repair patch is included for minor punctures. Clean the damaged area, apply the patch firmly, and allow sufficient time for it to adhere before re-inflating the airbed.

Pamérésan masalah

Airbed Appears to Lose Air

If your airbed seems to be losing air, especially during the first few uses, it is likely due to the material stretching. This is a normal characteristic of new inflatable products. Re-inflate the airbed to your desired firmness. The material will stabilize after a few uses.

Pompa Teu Gawe

Ensure the power cord is securely plugged into a working electrical outlet. Check that the pump dial is correctly set to either "Inflate" or "Deflate" and not in the "Off" position. If the issue persists, consult the manufacturer's support.

spésifikasi

Émbaran jaminan

This Intex Dura-Beam Standard Pillow Rest Classic Airbed Series Twin comes with a 90-day limited warranty. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, refer to the documentation included with your product or contact Intex customer support.

Rojongan Palanggan

For further assistance, questions, or to report any issues with your Intex airbed, please visit the official Intex website or contact their customer service department. Contact information can typically be found on the product packaging or the Intex brand store page.

You can visit the Intex Store at Toko Intex di Amazon.